Citronic U-Pad 170.879UK Bedienungsanleitung

Citronic Mischer U-Pad 170.879UK

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Citronic U-Pad 170.879UK (7 Seiten) in der Kategorie Mischer. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/7

U-PAD

Compact Mixer with USB Interface

Item ref: 170.879 UK

User Manual

Version 1.1

Caution: Please read this manual carefully before operating

Damage caused by misuse is not covered by the warranty

170.879UK User Manual

Introduction

Thank you for choosing a Citronic U-PAD mixer as part of your recording setup or stage sound system.

This product has been developed to provide a wide range of facilities for professional and reliable sound

reinforcement. Please read and keep this manual to achieve the best results from your purchase and avoid

damage through misuse.

SAFETY SYMBOL AND MESSAGE CONVENTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AVIS

RISQUE DE CHOC

ELECTRIQUE NE PAS

OUVRIR

This symbol indicates that dangerous voltage constituting a risk of

electric shock is present within this unit

This symbol indicates that there are important operating and

maintenance instructions in the literature accompanying this unit.

Warning

To prevent the risk of fire or electric shock, do not expose any components to rain or moisture. If liquids

enter the housing, stop using immediately, allow the unit to dry out and have checked by qualified it

personnel before further use. Avoid impact, extreme pressure or heavy vibration to the case.

No user serviceable parts inside Do not open the case refer all servicing to qualified service personnel. – –

Safety

• Use 5Vdc power from a host computer or USB power supply with 1A or more output.

• Avoid ingress of water or particles into any part of the housing. If liquids are spilled on

the console, stop using immediately, allow the unit to dry out and have checked by

qualified personnel before further use.

Placement

• Keep the console out of direct sunlight and away from heat sources.

• Do not place heavy objects on top of the control surface.

• Allow adequate space for airflow and keep the console away from damp or dust .

Cleaning

• Use a soft cloth with a neutral detergent to clean the housing as required.

• A soft brush can be used to clear debris from between controls without damaging them.

• Do not use solvents for cleaning the unit.

170.879UK User Manual

Console layout

The U-PAD mixing console has mono input channels which can accept a balanced microphone input or 2

switchable line/instrument input. There is also a stereo input for playback devices or line level

instruments.

All preamps have studio grade, low noise architecture for the cleanest possible path throughout the signal

chain. Console layout is set out in distinct sections to simplify operati on.

The following pages of this manual are divided up into these stages to explain the details and function of

each control.

Channel inputs

Channel 1 and 2 inputs are provided as XLR or 6.3mm jack on combo sockets.

If an XLR is plugged in, this will be con cted as low impedance (microphone) level. If a 6.3mm plug is ne

used, this will be connected as either line or instrument level (switchable)

The connections for these inputs are assigned as follows.

Mic / Line / Instrument Input

1. Combo input Connect a balanced microphone via XLR connection or a line level or

instrument input via 6.3mm plug. An unbalanced XLR can be connected provided

that +48V phantom power is not used. Wired as follows.

2. IMPED switch Press this button in to set the input impedance to instrument level or leave the button

in the up position for a line level input. (instrument level is usually for pickups, such

as those on a guitar. Electronic keyboards usually produce a line level output)

3. +48V phantom Press this button in to enable +48V phantom power to the XLR and the LED indicator

will light. This provides power to some condenser microphones and DI boxes.

Do not use with unbalanced XLR connectors. This does not affect any jack inputs.

Stereo Input

4. L/MONO Line level 6.3mm jack input.

Mono if connected alone or left side if right side input is connected.

5. RIGHT Line level 6.3mm jack input r right side of stereo input. fo

Balanced

Pin 1 = Ground

Pin 2 = Signal +

Pin 3 = Signal –

Unbalanced

Pin 1 = Ground

Pin 2 = Signal +

Pin 3 = Ground

Produktspezifikationen

Marke:	Citronic
Kategorie:	Mischer
Modell:	U-Pad 170.879UK
USB Anschluss:	Ja
Breite:	171 mm
Tiefe:	166 mm
Gewicht:	900 g
Produktfarbe:	Schwarz
Höhe:	66 mm
Anzahl USB 2.0 Anschlüsse:	1
Verpackungsbreite:	300 mm
Verpackungstiefe:	208 mm
Verpackungshöhe:	87 mm
Paketgewicht:	1210 g
Betriebsanleitung:	Ja
Anzahl Kanäle:	- Kanäle
Rack-Einbau:	Ja
Frequenzbereich:	20 - 20000 Hz
Digital sound Bearbeitung:	- Bit
Output Widerstand:	120 Ohm
DJ Mischer:	Ja
Phantomspeisung:	48 V