Citronic C-SUB-12 Bedienungsanleitung

Citronic Subwoofer C-SUB-12

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Citronic C-SUB-12 (1 Seiten) in der Kategorie Subwoofer. Dieser Bedienungsanleitung war fĂĽr 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
C-SUB Series User Manual
C-S Series Subwoofer UB
C-SUB- 12
178.661 UK
C-SUB- a 12
178.662 UK
User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Introducti on
Thank you for choosing a C-SUB series subwoofer as part of your sound reinforcement system. This unit has been designed for long
reliable operation, delivering powerful low frequencies. Please read and keep this manual to get the best results from your equipment.
Setting up
Position the C-SUB cabinet on a stable surface capable of supporting the weight and vibrations from the unit.
For the best results, please the cabinet on the floor, against a wall, ideally in a corner to enhance the bass output.
A speaker pole may be inserted to the top socket for mounting a mid-top or full-range cabinet. 35mm
For the passive model C-SUB- , connect to the amplifier ou ut via the SPK input connector, ensuring that the 12 tp
amplifier is capable of a minimum load of at least 4 . A mid-top cabinet may be connected to the SPK output Ω
connector for full-range output (maintaining overall 4 impedance). Do not connect further Subwoofers to this an Ω
output.
For the active model C-SUB- a connect a line level audio source to the 12 ,
combo R/jack input and further active cabinets may be connected from XL
the XLR output. t the Level and High Cut controls to minimum and Se
connect the mains using the supplied IEC power lead, checking that the to
supply voltage is correct for the C-SUB active cabinet. Power may be daisy-
chained from the IEC output to further active cabinets for convenience.
Switch power on to the unit and ensure that the audio source is playing
whilst gradually increasing the Volume control.
Rotating the High Cut control clockwise introduces higher bass frequencies to the cabinet and increases the output.
When the correct balance of bass frequencies is achieved, set the Volume control to the required output level.
For situations where 2 or more oofers are used together, it is possible for low frequencies to cancel each other out. subw
If the bass from 2 subwoofers is sounding less effective than expected, try pushing in the INV button on one u t. ni
This button reverses the phase of the speaker and ca fix bass cancellation issues or even help to avoid feedback. n
Use whichever setting of this switch gives the best result or leave it out if there is no benefit.
Before powering down, turn the Volume control fully down to avoid loud pops or bangs through e speaker. th
Disposal: that the product is classed as Electrical or The “Crossed Wheelie Bin” symbol on the product means
Electronic equipment and should not be disposed with other household or commercial waste
at the end of its useful life. The ods must be disposed of according to your local council guidelines. go
Errors and omissions excepted. Copyright© 2021.
AVSL Group Ltd. Unit 2-4 Bridgewater Park, Taylor Rd. Manchester. M41 7JQ
AVSL (EUROPE) Ltd, Unit 3D North Point House, North Point Business Park, New Mallow Road, Cork, Ireland.


Produktspezifikationen

Marke: Citronic
Kategorie: Subwoofer
Modell: C-SUB-12

Brauchst du Hilfe?

Wenn Sie Hilfe mit Citronic C-SUB-12 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Subwoofer Citronic

Bedienungsanleitung Subwoofer

Neueste Bedienungsanleitung fĂĽr -Kategorien-