Cisco VC220 Dome Bedienungsanleitung

Cisco Sicherheitskamera VC220 Dome

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Cisco VC220 Dome (16 Seiten) in der Kategorie Sicherheitskamera. Dieser Bedienungsanleitung war fĂĽr 22 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/16
Quick Start Guide
Cisco Small Business
VC 220 Dome WDR Day/Night PoE Network
Camera
Package Contents
•Cisco VC 220 Network Camera
•Power Adapter
•Two L-Shaped Audio Cables
•Mounting and Installation Accessories including a TORX™
screwdriver
•I/O Connector
•Setup and Documentation CD — includes localized Quick Start
Guides in French, German, Italian, and Spanish
•Quick Start Guide
2 VC 220 Dome WDR Day/Night PoE Network Camera Quick Start Guide
Welcome
Thank you for choosing the Cisco VC 220 Dome Wide Dynamic Range
(WDR) Day/Night PoE Network Camera. The Cisco VC 220 network
camera is a high-performance web-ready camera, and can be part of a
flexible surveillance system.
This guide describes how to physically install your Cisco VC 220 network
camera and how to install and launch the provided Setup Wizard.
VC 220 Dome WDR Day/Night PoE Network Camera Quick Start Guide 3
Before You Begin
Before you begin the installation, make sure that you have the following
equipment and services:
•At least one computer running Microsoft Internet Explorer 6.x, or later
(other browsers can be used but may have limited functionality)
•An active LAN IP connection
After the basic hardware installation, Cisco strongly recommends that you
run the Setup Wizard on the CD-ROM for first-time software installation of
the camera. Advanced users can set up the Cisco VC 220 directly from the
web interface of the camera.
It is suggested that you install the software – see “Getting Started with
the Configuration” section on page 11 – before you replace the dome
cover on the camera. This is because after the software is installed, you
will be able to use the web-based configuration utility to see how the lens
should be adjusted and how the camera needs to be focused.
See “Suggested Next Steps” section on page 12 for instructions on lens
and focusing adjustments, and how to replace the dome cover. The
recommended order of steps is as follows:
•“Mounting Your Cisco VC 220 Camera” section on page 8
•“Connecting the Equipment” section on page 9
•“Verifying the Hardware Installation” section on page 11
•“Getting Started with the Configuration” section on page 11
•“Adjusting the Lens” section on page 12
•“Attaching the Dome Cover” section on page 13
The supplied screwdriver is exclusively designed to match the dome
screws, which prevents the cover from being removed by an unauthorized
individual. Do not discard the screwdriver because you may need to
remove the dome cover at a later time.
1

Produktspezifikationen

Marke: Cisco
Kategorie: Sicherheitskamera
Modell: VC220 Dome

Brauchst du Hilfe?

Wenn Sie Hilfe mit Cisco VC220 Dome benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Sicherheitskamera Cisco

Cisco

Cisco VC220 Dome Bedienungsanleitung

14 Juni 2023

Bedienungsanleitung Sicherheitskamera

Neueste Bedienungsanleitung fĂĽr -Kategorien-

Dahua Technology

Dahua Technology A42BJA2 Bedienungsanleitung

18 April 2024
Bosch

Bosch AutoDome VG4-61 Bedienungsanleitung

18 April 2024
Mobotix

Mobotix MX-D16A-F-6D6N061 Bedienungsanleitung

18 April 2024
Axis

Axis Q6125-LE 50HZ Bedienungsanleitung

17 April 2024
ACTi

ACTi A23 Bedienungsanleitung

17 April 2024
Pelco

Pelco Sarix Enhanced IME839-1ERS Bedienungsanleitung

16 April 2024
HiLook

HiLook IPC-T120-D Bedienungsanleitung

16 April 2024
Smartwares

Smartwares HA32S Bedienungsanleitung

16 April 2024
Hikvision

Hikvision DS-2CE5582P-VFIR3 Bedienungsanleitung

16 April 2024
AirLive

AirLive MD-3025 Bedienungsanleitung

16 April 2024