Cisco MX84 Cloud Managed Security Appliance Bedienungsanleitung
Cisco
Firewall (Hardware)
MX84 Cloud Managed Security Appliance
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Cisco MX84 Cloud Managed Security Appliance (8 Seiten) in der Kategorie Firewall (Hardware). Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/8
White Paper
Cisco Meraki Auto VPN
JU LY 2013
This white paper describes Auto VPN (Layer 3 site-to-site IPsec) and
how to deploy it between Cisco Meraki Security Appliances.
Copyright
© 2013 Cisco Systems, Inc. All rights reserved
Trademarks
Meraki® is a registered trademark of Cisco Systems, Inc.
Table of Contents Introduction
Cisco Meraki’s Solution
For More information
Cisco Systems, Inc. | 500 Terry A. Francois Blvd, San Francisco, CA 94158 | (415) 432-1000 | sales@meraki.com
2
Introduction
What is VPN?
Virtual Private Networks (VPNs) are used by most organizations seeking to provide teleworkers
with pseudo on-site access to core network resources or to connect branch oces to a core
network. VPNs are encrypted tunnels that allow for the secure, confidential transfer of data across
unsecured, public infrastructure — typically, the Internet.
What is site-to-site VPN?
One of the most common implementations of VPN is site-to-site VPN, where one location hosting
network resources is securely connected via VPN to another location (which may also be hosting
resources); usually the two locations are part of the same organization.
The diagram below shows a site-to-site VPN:
Site-to-site VPNs are deployed between the security appliances/firewalls at each location. The
client devices (such as laptops or workstations) behind these firewalls do not need software
installed or local settings configured to enable them to send or receive data with the other sites.
In a site-to-site VPN (also known as “spoke-to-spoke”), all of an organization’s individual mesh
networks are connected to one another via VPN. In a topology, all of the satellite hub-and-spoke
branch oce networks (“spokes”) tunnel back to a central oce (“hub”) over VPN; the spokes do
not exchange data directly with one another.
Why is VPN hard?
With traditional architectures, the configuration and management complexity of multi-site VPN
can become prohibitive as the number of distributed sites increases. This is because both ends of
each VPN tunnel need to be manually created and tuned, often through a complex command line
interface. This is a time-consuming and error-prone process: variables such as the IP addresses of
both security appliance interfaces, a pre-shared key or certificate, authentication and encryption
protocols, a list of exportable subnets, and more need to be manually specified and configured
twice for each tunnel. Imagine: if a primary WAN uplink fails over to a 3G/4G link and the external
IP address of the VPN changes, all of these settings would need to be re-established for the new
address for VPN functionality to resume.
INTERNET
Encrypted IPsec VPN tunnel
Network A
LOCATION
1 L
OCATION 2
Client devices A1, A2,
and A3 on Network A
Client devices B1, B2,
and B3 on Network B
A1 A2 A3 B1 B2 B3
10.1.0/24
Network B
192.168.1.0/24
Cisco Systems, Inc. | 500 Terry A. Francois Blvd, San Francisco, CA 94158 | (415) 432-1000 | sales@meraki.com
3
Produktspezifikationen
Marke: | Cisco |
Kategorie: | Firewall (Hardware) |
Modell: | MX84 Cloud Managed Security Appliance |
Gewicht: | 4100 g |
Übertragungstechnik: | Kabelgebunden |
AC Eingangsspannung: | 100-220 V |
AC Eingangsfrequenz: | 50 - 60 Hz |
Anzahl USB 2.0 Anschlüsse: | 1 |
Betriebstemperatur: | 0 - 40 °C |
Relative Luftfeuchtigkeit in Betrieb: | 5 - 95 % |
Netzstandard: | IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
Warentarifnummer (HS): | 85176990 |
Stromverbrauch (max.): | 32 W |
Maximale Datenübertragungsrate: | 1000 Mbit/s |
Zahl der Benutzer: | 200 Benutzer |
WAN Port: | Ethernet (RJ-45) |
Stromversorgung: | 100 W |
Rack-Einbau: | Ja |
Formfaktor: | 1U |
Abmessungen (BxTxH): | 483 x 254 x 44 mm |
HDD Kapazität: | 1000 GB |
Speichermedien Typ: | HDD |
Anzahl VPN-Tunnels: | 100 |
Anzahl installierten SFP Module: | 2 |
Firewall Durchsatz: | 500 Mbit/s |
VPN Durchsatz: | 250 Mbit/s |
Anzahl VPN Anschlüsse: | 100 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Cisco MX84 Cloud Managed Security Appliance benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Firewall (Hardware) Cisco
3 August 2024
26 Mai 2023
Cisco MX65W Cloud Managed Security Appliance Bedienungsanleitung
9 November 2022
6 November 2022
1 November 2022
Bedienungsanleitung Firewall (Hardware)
- Firewall (Hardware) HP
- Firewall (Hardware) ZyXEL
- Firewall (Hardware) Netgear
- Firewall (Hardware) Fortinet
- Firewall (Hardware) D-Link
- Firewall (Hardware) Lancom
- Firewall (Hardware) Check Point
- Firewall (Hardware) WatchGuard
- Firewall (Hardware) Allied Telesis
Neueste Bedienungsanleitung für -Kategorien-
4 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
30 August 2024
30 August 2024
13 August 2024
12 August 2024
10 August 2024