Cisco IR1101 Bedienungsanleitung

Cisco Router IR1101

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Cisco IR1101 (46 Seiten) in der Kategorie Router. Dieser Bedienungsanleitung war für 28 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/46
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
IR1101 Industrial Integrated
Services Router Hardware
Installation Guide
January 2019
Text Part Number:
2
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS,
INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED
WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED
WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.
The following information is for FCC compliance of Class A devices: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case users will be required to correct the interference at their own
expense.
Modifications to this product not authorized by Cisco could void the FCC approval and negate your authority to operate the product.
The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public domain
version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDEDAS ISWITH ALL
FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE
PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING,
WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR
ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL:
www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship
between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output,
network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative
content is unintentional and coincidental.
IR1101 Industrial Integrated Services Router Hardware Installation Guide
© 2019 Cisco Systems, Inc. All rights reserved.
3
Cisco Systems, Inc. www.cisco.com
Preface
This preface describes the objectives, audience, organization, and conventions of this guide and describes related
documents that have additional information. The sections are:
Objective, page 3
Audience, page 3
Conventions, page 3
Safety Warnings, page 4
Related Documentation, page 9
Searching Cisco Documents, page 9
Obtaining Documentation and Submitting a Service Request, page 10
Objective
This guide provides an overview and explains how to install and connect the Cisco IR1101.
Audience
This guide is intended for people who have a high level of technical ability, although they may not have experience with
Cisco software.
Conventions
This section describes the conventions used in this guide.
NOTE: Means reader take note. Notes contain helpful suggestions or references to additional information and material.
CAUTION: This symbol means reader be careful. In this situation, you might do something that could result in equipment
damage or loss of data.
TIP: Means the following information will help you solve a problem. The tip information might not be troubleshooting or
even an action, but could be useful information.
WARNING: IMPORTANT SAFETY INSTRUCTIONS
Means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of
the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use
the statement number provided at the end of each warning to locate its translation in the translated safety warnings
that accompanied this device.

Produktspezifikationen

Marke: Cisco
Kategorie: Router
Modell: IR1101
Breite: 132.5 mm
Tiefe: 124.9 mm
Gewicht: 1020 g
Produktfarbe: Schwarz
Höhe: 60 mm
Energiequelle: Gleichstrom
Betriebstemperatur: -40 - 60 °C
Relative Luftfeuchtigkeit in Betrieb: 10 - 95 %
Netzstandard: IEEE 802.1D, IEEE 802.1Q
Unterstützte Sicherheitsalgorithmen: 256-bit AES, HTTPS, IPSec, SSL/TLS
Quality of Service (QoS) Support: Ja
Stromverbrauch (Standardbetrieb): 9.8 W
Anzahl Ethernet-LAN-Anschlüsse (RJ-45): 4
Warentarifnummer (HS): 85176990
Ethernet LAN Datentransferraten: 10, 100 Mbit/s
LED-Anzeigen: Ja
Anzahl der USB-Anschlüsse: 2
USB-Version: 2.0
Mobilfunknetzgenerierung: Nicht unterstützt
Multicast Unterstützung: Ja
Anzahl Combo-SPF-Anschlüsse: 1
Ausgangsspannung: 12 - 48 V
Speicherkapazität: 4096 MB
Interner Speichertyp: DRAM
Ethernet Schnittstellen Typ: Schnelles Ethernet
Unterstützte Protokolle: SCADA, DNP3, T101-104, Raw Socket TCP, UDP
Ethernet-WAN: Ja
DSL-WAN: Nein
Verkabelungstechnologie: 10/100Base-T(X)
VPN Unterstützung: Cisco Easy VPN Solution client and server\nNAT transparency\nDynamic Multipoint VPN (DMVPN)\nTunnel-less Group Encrypted Transport VPN\nFlex VPN
Firewall: Ja
DHCP-Client: Ja
DHCP-Server: Ja
Reset-Knopf: Ja
Flash-Speicher: 8000 MB
Anzahl serielle Anschlüsse: 1
Sicherheit: UL 60950-1, 2nd edition; CAN/CSA C22.2 No. 60950-1, 2nd edition, EN 60950-1, 2nd edition; CB to IEC 60950-1, 2nd edition
Zugriffkontrollliste: Ja
Speichermedien: Flash
Höhe bei Betrieb: -152.4 - 1524 m
NEtzwerkadressenübersetzung (NAT): Ja
Router Protokoll: BGP, EIGRP, HSRP, RIP-1, RIP-2
Data Link Protokolle: IPv4, IPv6
Authentisierung Methode: Secure HTTP (HTTPS), FTP, Telnet Authentication Proxy
Ethernet/LAN: Ja

Brauchst du Hilfe?

Wenn Sie Hilfe mit Cisco IR1101 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Router Cisco

Bedienungsanleitung Router

Neueste Bedienungsanleitung für -Kategorien-