Cisco Aironet 3502E Bedienungsanleitung

Cisco Zugangspunkt Aironet 3502E

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Cisco Aironet 3502E (34 Seiten) in der Kategorie Zugangspunkt. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/34

G ETTING S GTARTED UIDE

Cisco Aironet 3500 Series Lightweight Access Point

Last Updated: November 20, 2014

1About this Guide

2Safety Instructions

3Unpacking

4Overview

5Configuring the Access Point

6Mounting the Access Point

7Deploying the Access Point on the Wireless Network

8Troubleshooting

9Declarations of Conformity and Regulatory Information

10 Configuring DHCP Option 43 and DHCP Option 60

11 Access Point Specifications

1 About this Guide

This Guide provides instructions on how to install and configure your Cisco Aironet 3500 Series

Access Point. This guide also provides mounting instructions and limited troubleshooting procedures.

2 Safety Instructions

Translated versions of the following safety warnings are provided in the translated safety warnings

document that is shipped with your access point. The translated warnings are also in the Translated

Safety Warnings for Cisco Aironet Access Points, which is available on your documentation CD and

Cisco.com.

Warning

IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury.

Before you work on any equipment, be aware of the hazards involved with electrical

circuitry and be familiar with standard practices for preventing accidents. Use the

statement number provided at the end of each warning to locate its translation in the

translated safety warnings that accompanied this device.

Statement 1071

SAVE THESE INSTRUCTIONS

Warning

Read the installation instructions before you connect the system to its power source.

Statement 1004

Warning

This product must be connected to a Power-over-Ethernet (PoE) IEEE 802.3af compliant

power source or an IEC60950 compliant limited power source.

Statement 353

Warning

Installation of the equipment must comply with local and national electrical codes.

Statement 1074

Warning

This product relies on the building’s installation for short-circuit (overcurrent)

protection. Ensure that the protective device is rated not greater than:

20A.

Statement 1005

Warning

Do not operate your wireless network device near unshielded blasting caps or in an

explosive environment unless the device has been modified to be especially qualified for

such use.

Statement 245B

Warning

In order to comply with FCC radio frequency (RF) exposure limits, antennas should be

located at a minimum of 7.9 inches (20 cm) or more from the body of all persons.

Statement 332

Caution The fasteners you use to mount an access point on a ceiling must be capable of

maintaining a minimum pullout force of 20 lbs (9 kg) and must use all 4 indented holes

on the mounting bracket.

Caution This product and all interconnected equipment must be installed indoors within the same

building, including the associated LAN connections as defined by Environment A of the

IEEE 802.af Standard.

Note The access point is suitable for use in environmental air space in accordance with section

300.22.C of the National Electrical Code and sections 2-128, 12-010(3), and 12-100 of the

Canadian Electrical Code, Part 1, C22.1. You should not install the power supply or power

injector in air handling spaces.

Note Use only with listed ITE equipment.

Produktspezifikationen

Marke:	Cisco
Kategorie:	Zugangspunkt
Modell:	Aironet 3502E
Breite:	221 mm
Tiefe:	221 mm
Gewicht:	1040 g
Höhe:	47 mm
AC Eingangsspannung:	100 - 240 V
AC Eingangsfrequenz:	50 - 60 Hz
Gleichstrom-Anschluss (DC):	Ja
Betriebstemperatur:	-20 - 55 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 90 %
Netzstandard:	IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.3af
Unterstützte Sicherheitsalgorithmen:	EAP, EAP-TLS, EAP-TTLS, PEAP, TKIP, WPA, WPA2
Zertifizierung:	FCC, RSS, EMI, EN 60601-1-2 EMC
Power over Ethernet (PoE):	Ja
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Maximale Datenübertragungsrate:	300 Mbit/s
Ethernet LAN Datentransferraten:	10,100,1000 Mbit/s
2,4 GHz:	Ja
WAN Port:	Ethernet (RJ-45)
Antenne Zunahmeniveau (max):	6 dBi
Anzahl der Antennen:	6
Eingebaut:	Nein
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-40 - 85 °C
Frequenzband:	2.4, 5 GHz
Web-basiertes Management:	Nein
Speicherkapazität:	128 MB
5 GHz:	Ja
Antennenfunktionen:	Abnehmbare Antenne
Flash-Speicher:	32 MB
Sicherheit:	UL 60950-1, CAN/CSA-C22.2 No. 60950-1, UL 2043, IEC 60950-1, EN 60950-1
Konformität mit Industriestandards:	IEEE 802.11a/b/g, IEEE 802.11n 2.0, IEEE 802.11h, IEEE 802.11d