Cisco 5508 Bedienungsanleitung

Cisco Regeln 5508

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Cisco 5508 (34 Seiten) in der Kategorie Regeln. Dieser Bedienungsanleitung war für 28 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/34

Americas Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Cisco 5500 Series Wireless Controller

Installation Guide

This guide is designed to help you install and minimally configure your Cisco 5500 Series Wireless

Controller.

• Compliance and Safety Information, page 1

• Controller Overview, page 3

• Unpacking and Installing the Controller, page 8

• Using the Startup Wizard, page 24

• Controller Specifications, page 31

• Obtaining Documentation and Submitting a Service Request, page 31

• Cisco 90-Day Limited Hardware Warranty Terms, page 31

Compliance and Safety Information

FCC Safety Compliance Statement

Modifying the equipment without Cisco’s authorization may result in the equipment no longer

complying with FCC requirements for Class A digital devices. In that event, your right to use the

equipment may be limited by FCC regulations, and you may be required to correct any interference to

radio or television communications at your own expense.

Cisco 5500 Series Wireless Controller Installation Guide

78-18998-01

Compliance and Safety Information

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case users will be

required to correct the interference at their own expense.

Try to correct the interference by one or more of the following measures:

• Verify that the ambient temperature remains between 32 to 104° F (0 to 40° C), taking into account

the elevated temperatures when installed in a rack or enclosed space.

• When multiple Cisco 5500 Series Wireless Controllers are mounted in an equipment rack, be sure

that the power source is sufficiently rated to safely run all the equipment in the rack.

• Verify the integrity of the electrical ground before installing the controller.

Safety Information

Safety warnings appear throughout this guide in procedures that may harm you if performed incorrectly.

A warning symbol precedes each warning statement. The warnings below are general warnings that

apply to the entire guide. Translated versions of the safety warnings in this guide are provided in the

Regulatory Compliance and Safety Information for the Cisco 5500 Series Wireless Controller document

that accompanies this guide.

Warning

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you

work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar

with standard practices for preventing accidents. Use the statement number provided at the end of

each warning to locate its translation in the translated safety warnings that accompanied this device.

Statement 1071

SAVE THESE INSTRUCTIONS

Warning

This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the

absence of a suitably installed ground conductor. Contact the appropriate electrical inspection

authority or an electrician if you are uncertain that suitable grounding is available.

Statement 1024

Statement 371—Power Cable and AC Adapter

Cisco 5500 Series Wireless Controller Installation Guide

78-18998-01

Controller Overview

Statement 191—VCCI Class A Warning for Japan

Controller Overview

The Cisco 5500 Series Wireless Controller is currently available in one model: 5508.

The Cisco 5500 Series Wireless Controller, designed for 802.11n performance and maximum scalability,

supports up to 250 lightweight access points and 7000 clients, making it ideal for large-sized enterprises

and high-density applications. A core component of the Cisco unified wireless solution, these controllers

deliver wireless security, intrusion detection, radio management, quality of service (QoS), and mobility

across an entire enterprise. The controllers work in conjunction with other controllers, Cisco Wireless

Control System (WCS), and access points to provide network managers with a robust wireless LAN

solution.

The Cisco 5500 Series Wireless Controller supports the OfficeExtend access point, which provides

secure communications from a controller to an access point at a remote location, seamlessly extending

the corporate WLAN over the Internet to an employee’s residence.

In order to best use this guide, you should have already designed the wireless topology of your network.

Because the radio resource management (RRM) feature automatically detects and configures access

points as they appear on the network, it is not necessary to have any access points on the network in order

to install and configure a controller.

Figure 1 shows the front panel of the Cisco 5508 Wireless Controller.

Warning

This is a Class A product based on the standard of the Voluntary Control

Council for Interference by Information Technology Equipment (VCCI). If this

equipment is used in a domestic environment, radio disturbance may arise.

When such trouble occurs, the user may be required to take corrective

actions.

Produktspezifikationen

Marke:	Cisco
Kategorie:	Regeln
Modell:	5508
Gewicht:	9100 g
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 95 %
Netzstandard:	IEEE 802.11a,IEEE 802.11b,IEEE 802.11g, 802.11d,IEEE 802.11e,IEEE 802.11h,IEEE 802.11k,IEEE 802.11n,IEEE 802.11r,IEEE 802.11u,IEEE 802.11w,IEEE 802.11ac,IEEE 802.3,IEEE 802.3u,IEEE 802.1q,IEEE 802.1ax
Unterstützte Sicherheitsalgorithmen:	WPA,WPA2
Stromverbrauch (Standardbetrieb):	115 W
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	3
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-25 - 70 °C
Luftfeuchtigkeit bei Lagerung:	5 - 95 %
Management-Protokolle:	SNMP v1, v2c, v3, Telnet, TFTP, SNTP, HTTP/HTTPS
Abmessungen (BxTxH):	440 x 539 x 44.5 mm
Eingangsspannung:	100 - 240 V
Verkabelungstechnologie:	10/100/1000Base-T(X)
Eingangsfrequenz:	50/60 Hz
Datenübertragungsrate:	1 Gbit/s
Authentisierung Methode:	IEEE 802.1X, RADIUS, TACACS