Cisco 10000-1P4-1AC Bedienungsanleitung

Cisco Router 10000-1P4-1AC

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Cisco 10000-1P4-1AC (6 Seiten) in der Kategorie Router. Dieser Bedienungsanleitung war für 27 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/6

Data Sheet

Cisco 10000 Series Performance Routing Engine 4

The Cisco® 10000 Series Performance Routing Engine 4 (PRE4) (Figure 1) addresses

the demand for increased performance, scalability, and hierarchical quality of service

(HQoS) to support diverse network-edge requirements for residential and business

services markets.

Product Overview

The Cisco 10000 Series is a Service Provider edge aggregation router that oﬀers a single solution

for the diverse requirements of broadband aggregation, leased-line, Ethernet, ATM, and Frame

Relay services. The Cisco 10000 Series provides customers with superior price/performance,

industry-leading IP services, maximum platform scalability, and high availability.

Service providers require scalable networks to proﬁtably meet their customers' requirements for

better performance, more services, and higher reliability. Edge routers, such as the Cisco 10000

Series, are needed to manage higher-bandwidth requirements, more subscribers, and multiple

service levels ranging from best-eﬀort consumer Internet data services to high-priority business

applications, voice, and video.

Figure 1. Cisco 10000 Series Performance Routing Engine 4

Designed to meet new requirements from service providers for high-capacity aggregation with

sophisticated IP services, the Cisco 10000 Series PRE4 uses the latest generation of the Cisco

patented Parallel Express Forwarding (PXF) technology. PXF is a parallel multiprocessor

architecture that enables deployment of multiple IP services while maintaining peak performance

throughput. The PRE4 also supports the ﬂexible Hierarchal Queuing Framework (HQF) available

on the Cisco 10000 Series Routers. The HQF implementation on the PRE4 allows three levels

(class, logical, and physical) of scheduling to apply queuing and shaping (see Figure 2).

Applications

The Cisco 10000 Series PRE4 can be used to deliver triple-play services for both Ethernet and

ATM transport networks. A service provider can use the ﬂexibility and performance of the PRE4 to

simultaneously deliver data, voice, and video to both residential and business customers.

Data Sheet

Ethernet service examples include:

● Class – Multiple packet queues for data, voice, or video

● Logical – PPP or IP sessions grouped by Gold, Bronze, or Silver packages for bandwidth

and QoS levels

● Physical – QinQ or dot1Q VLANs to separate consumer, business, and wholesale

customers

ATM service examples include:

● Class – Multiple packet queues for data, voice, or video

● Logical – ATM virtual circuits grouped by Gold, Bronze, or Silver packages for bandwidth

and QoS levels

● Physical – ATM virtual paths to separate consumer, business, and wholesale customers

Figure 2. Examples of Three-Level Scheduling with HQF and the Cisco 10000 Series PRE4

Key Features and Beneﬁts

The Cisco 10000 Series PRE4 delivers both scalability improvements and new features:

● Provides up to 10 million packets per second (mpps) of processing power for increased

throughput

● Delivers Hierarchal Queuing Framework (HQF) for up to three levels of service granularity

● Supports increased bandwidth through link bonding connections between the PRE4 and

Cisco 10000 Series SPA Interface Processor (SIP)-600

11.2 Gbps transmit and receive (full duplex) to any SIP (total bandwidth distributed

across installed shared port adapters [SPAs])

2.8 Gbps transmit and receive (full duplex) to each full-height line card

1.4 Gbps transmit and receive (full duplex) to each half-height line card

● Includes 800-MHz route processor with 4 GB ECC protected DRAM for new features and

scalability improvements

● Delivers enhanced storage options for larger and more complex conﬁgurations

14 MB nonvolatile RAM (NVRAM)

128 MB Compact Flash – ﬁxed internal memory

512 MB or 1 GB Compact Flash – front panel removable memory

Data Sheet

● Uses Cisco patented PXF technology to provide maximum IP service ﬂexibility without

performance impact

● Supports processor redundancy, helping enable 99.999-percent network uptime

● Support for Building Integrated Timing Supply (BITS) interface, a component of the Cisco

10000 Series BITS architecture that enables network service synchronization

Product Speciﬁcations

Table 1. Product Speciﬁcations

Description Speciﬁcation

Product Compatibility Compatible with the Cisco 10008 8-slot chassis

Software Compatibility Compatible with Cisco IOS ® Software Release 12.2(33)SB and later Release 12.2 images supported

on the Cisco 10000 Series

Connectivity and

Controls

10/100 Ethernet port network management interface with RJ-45 connector

Console serial port

Auxiliary (modem) port

Push button reset

Features and

Functions

Supports up to 61,500 broadband subscribers

Hierarchal Queuing Framework (HQF) provides up to 3 levels of QoS or shaping per packet

10 mpps forwarding performance through the PXF complex

LEDs Alarms: Critical/Major/Minor (yellow, three per card)

● ON indicates an alarm condition

● OFF indicates no alarm

Fail (yellow, one per card)

● ON indicates that a major failure has disabled the Cisco PRE4

● OFF indicates that the Cisco PRE3 is operating properly

Status (bicolor, one per card)

● Flashing yellow indicates that the system is booting

● Green indicates that Cisco PRE4 is active (as a primary)

● Flashing green indicates that Cisco PRE4 is standby (as a secondary)

● OFF indicates no power to Cisco PRE4

Ethernet activity/link (green, two per card)

● Activity: Green indicates packets are being transmitted and received

● Link: Green indicates carrier detected; the port is able to accept traﬃc

CF card slot 0 (green – ON indicates slot 0 is active)

BITS

● Green indicates T1/E1 BITS input is conﬁgured and working properly

● Yellow indicates T1/E1 BITS input is configured and has errors

● Oﬀ indicates T1/E1 BITS input is not conﬁgured

Memory Route processor memory: 4 GB ECC protected DRAM

Onboard memory: 128 MB Compact Flash, 14 MB NVRAM (7 MB primary and 7 MB backup)

Removable memory: 512 MB or 1 GB Compact Flash

Packet memory: 512 MB ECC protected

Performance PXF performance: 10 million packets per second

RP forwarding performance: 400,000 packets per second

Reliability and

Availability

Supports Online Insertion and Removal (OIR)

Supports Nonstop Forwarding (NSF) and Stateful Switchover (SSO)

Supports In-Service Software Upgrades (ISSUs)

Produktspezifikationen

Marke:	Cisco
Kategorie:	Router
Modell:	10000-1P4-1AC
Gewicht:	409 g
Übertragungstechnik:	Kabelgebunden
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	5 - 95 %
Netzstandard:	IEEE 802.1p
Eingebauter Ethernet-Anschluss:	Ja
Vollduplex:	Ja
Stromverbrauch (Standardbetrieb):	210 W
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	8
Ethernet LAN Datentransferraten:	10,100 Mbit/s
Stromversorgung:	210 W
Temperaturbereich bei Lagerung:	-40 - 70 °C
Abmessungen (BxTxH):	406.4 x 48.4 x 253.2 mm
Ethernet-WAN:	Ja
Höhe bei Betrieb:	60 - 4000 m
Relative Luftfeuchtigkeit:	5 - 95 %
Gewicht (imperial):	9 Pfund