Chief RPAC1W Bedienungsanleitung

Chief Beamerzubehör RPAC1W

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Chief RPAC1W (12 Seiten) in der Kategorie Beamerzubehör. Dieser Bedienungsanleitung war für 67 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/12

I N S T A L L A T I O N I N S T R U C T I O N S

Locking Projector Mount

RPAA1, B1, C1

RPAA1, B1, C1 Installation Instructions

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and

subsidiaries (collectively "Milestone"), intend to make this

manual accurate and complete. However, Milestone makes no

claim that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Milestone

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Milestone assumes

no responsibility for accuracy, completeness or sufficiency of

the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty!

It is the installer’s responsibility to make sure all components

are properly assembled and installed using the instructions

provided.

WARNING: Failure to provide adequate structural strength

for this component can result in serious personal injury or

damage to equipment! It is the installer’s responsibility to

make sure the structure to which this component is attached

can support five times the combined weight of all equipment.

Reinforce the structure as required before installing the

component.

WARNING:

Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all components attached to the RPAX1 does not exceed 50 lbs

(22.68 kg).

WARNING: Use this mounting system only for its intended

use as described in these instructions. Do not use

attachments not recommended by the manufacturer.

WARNING: Never operate this mounting system if it is

damaged. Return the mounting system to a service center for

examination and repair.

WARNING: Do not use this product outdoors.

WARNING: The RPAX1 mounts are designed to be

mounted to a 1-1/2" NPT or NPSM following ANSI/ASME

B1.20.1 (Schedule 40, 0.154" minimum thickness steel or

aluminum-ASTM B221) threaded extension column.

NOTE: RPAA1, RPAB1 and RPAC1 models are included in

these installation instructions. Throughout these

instructions "RPAX1" is used to designate all of the

models covered by these instructions.

--SAVE THESE INSTRUCTIONS--

Installation Instructions RPAA1, B1, C1

DIMENSIONS

4.02

102.0

4° ROLL

ADJUST

12.31

312.7

6.11

155.1

27° YAW

ADJUST

1.50" DIA NPT

3.73

94.8

25° PITCH

ADJUST

DIMENSIONS: INCHES

[MILLIMETERS]

Produktspezifikationen

Marke:	Chief
Kategorie:	Beamerzubehör
Modell:	RPAC1W
Breite:	411 mm
Tiefe:	307 mm
Produktfarbe:	Weiß
Höhe:	86 mm
Höchstgewichtskapazität:	22.7 kg
Zertifizierung:	UL Listed
Markenkompatibilität:	Jede Marke