Chief KITEF009012 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Chief KITEF009012 (7 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/7
I N S T A L L A T I O N I N S T R U C T I O N S
Ceiling Plate
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
CMA101
CMA101 Installation Instructions
2
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.
IMPORTANT SAFETY INSTRUCTIONS!
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this component can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this component is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components attached to the CMA101 mount does not
exceed 500 lbs (226.8 kg).
NOTE: The weight capacity of the CMA101 mount may be
LIMITED to the lowest weight capacity of any other
component located within the mounting system.
WARNING: Use this mounting system only for its intended
use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
WARNING: Never operate this mounting system if it is
damaged. Return the mounting system to a service center for
examination and repair.
WARNING: Do not use this product outdoors.
WARNING: Do NOT attach to vertical mounting surfaces
such as walls or angled ceilings!
IMPORTANT ! : The CMA101 mount is designed to be:
• mounted to double 2" x 4" wood stud cross bracing
between two 2" x 4" ceiling joists using 5/16" x 3-1/2"
Grade 2 lag bolts (not included); or
• mounted to a concrete ceiling with a minimum
thickness of 8" and a maximum drywall covering of
5/8" using 5/16" x 3-1/2" Grade 2 lag bolts (not
included) with UX10 OR AF8 anchors (not included); or
•
suspended from four 5/16-18 Grade ASTM A307 or
better threaded rods (not included) which are secured
to Unistrut®
(with a maximum span of 48")
by 5/16"
Grade 2 or better nuts (not included).
Threaded rods
must have 18 threads per square inch.
--SAVE THESE INSTRUCTIONS--
Installation Instructions CMA101
3
TOOLS REQUIRED FOR INSTALLATION
PARTS
DIMENSIONS
5/32" (security-included)
Hardware required - not included
(dependent on installation method)
1. Install to wood ceiling joists
• 5/16" x 3-1/2" (minimum length) Grade 2 lag bolts (Qty. 4)
2. Install to concrete
• 5/16" x 3-1/2" (minimum length) Grade 2 lag bolts (Qty. 4)
• Fischer UX10 concrete anchors OR Toggler AF8 concrete anchors (Qty. 4)
3. Install to Unistrut
• 5/16-18 threaded rod (Qty. 4)
• 5/16" Grade 2 nuts (Qty. 8)
• 5/16" Grade 2 washers (Qty. 8)
5/32"
7/32" (wood)
5/16" (AF8)
3/8" (UX10)
A (1)
[CMA101]
B (1)
5/16-18 x 3/8"
C (1)
5/16-18 x 5/16"
D (1)
5/32" (security)
(security)
.69
17 .463
1 1/2" NPS
2.00
50.800
127
5.00
127
5.00
101.600
4.00
4.00
101.600
4X
9.931
.39
2.00
50.800
DIMENSIONS: [MILLIMETERS]
INCHES


Produktspezifikationen

Marke: Chief
Kategorie: Nicht kategorisiert
Modell: KITEF009012

Brauchst du Hilfe?

Wenn Sie Hilfe mit Chief KITEF009012 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Chief

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-