Chief FSA1015B Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Chief FSA1015B (8 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
I N S T A L L A T I O N I N S T R U C T I O N S
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY, STE 700
SAVAGE, MINNESOTA 55378 USA
8804-000307
©2006 Chief Manufacturing
www.chiefmfg.com
03/06
BEFORE YOU BEGIN
19" EQUIPMENT RACK ACCESSORY
Model: FSA-1015
Specifications:
• Designed for equipment rack with 19" wide
vertical attach rails.
• Accommodates the following installation
configurations:
- Direct installation of VESA compliant
display/interface (75x75mm, 100x100mm,
and 100x200mm)
- FWD Cynergy Wall Mount
- FSR and FTR Fusion Wall Mounts
• Weight capacity of 30 lbs (13 kg).
FSA-1015
(Shown with optional Equipment Rack,
FTR, and FWD mounts)
WARNING: It is the installer’s responsibility to make sure all components are properly assembled and installed using
the instructions provided. Failure to read, thoroughly understand, and follow all instructions can result in serious
personal injury, damage to equipment, or voiding of factory warranty.
• If you have any questions about this these instructions or your specific installation, contact Chief Manufacturing
at 1-800-582-6480 or 952-894-6280.
Model: FSA-1015 Installation Instructions
2
IMPORTANT WARNINGS AND CAUTIONS!
WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to provide adequate structural strength for this component can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to make sure the structure to which this component is
attached can support five times the combined weight of all equipment. Reinforce the structure as required before
installing the component.
WARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of all components attached to the FSA-1015, including the
mount (if required) and display, does not exceed 30 lbs (13 kg).
DIMENSIONS
Installation Instructions Model: FSA-1015
3
TOOLS REQUIRED FOR INSTALLATION
• #2 Phillips Screwdriver
• 7/16" Wrench (for installation of existing FWD
Wall Mount)
NOTE: Other tools may be required depending on your
method of installation.
PARTS
After unpacking carton, inspect and verify contents (See
Figure 1). If any listed parts are missing or damaged,
contact Chief Customer Service at 1-800-582-6480.
Figure 1: Parts
Table 1: Parts
Item Description Qty
10 BRACKET, Display Mounting 1
20 BRACKET, Side 2
30 SCREW, Phillips Pan Machine, #10-32 x 1/2" 4
40 SCREW, Phillips Pan Machine, #12-24 x 1/2" 4
50 SCREW, Phillips Pan Machine, #10-24 x 1/2" 8
60 SCREW, Phillips Pan Machine, #10-24 x 1-1/4" 2
70 NUT, Nylock, Short, #10-24 4
80 BRACKET, FWD Wall Mount 1
90 SCREW, Phillips Pan Machine, M4 x 12mm 6
100 SCREW, Phillips Pan Machine, M4 x 20mm 6
110 SCREW, Phillips Pan Machine, M4 x 30mm 6
120 SPACER, Nylon, 3/8" 6
130 SPACER, Nylon, 3/4" 6
10
20
30
40
60
70
80
100
50
90
110
120
BAG "A"
BAG "B"
BAG "C"
BAG "D"
130


Produktspezifikationen

Marke: Chief
Kategorie: Nicht kategorisiert
Modell: FSA1015B

Brauchst du Hilfe?

Wenn Sie Hilfe mit Chief FSA1015B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Chief

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-