Chief CPAE080W Bedienungsanleitung

Chief Beamerzubehör CPAE080W

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Chief CPAE080W (8 Seiten) in der Kategorie Beamerzubehör. Dieser Bedienungsanleitung war für 69 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/8

I N S T A L L A T I O N I N S T R U C T I O N S

I N S T R U C T I O N S D ' I N S T A L L A T I O N

M O N T A G E A N L E I T U N G

Extension Columns with Cable Cover

Colonnes d'extension avec protège-câble

Ausziehsäulen mit Kabelabdeckung

CPAE Columns

CPAE Columns Installation Instructions

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and

subsidiaries (collectively "Milestone"), intend to make this

manual accurate and complete. However, Milestone makes no

claim that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Milestone

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Milestone assumes

no responsibility for accuracy, completeness or sufficiency of

the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all components are

properly assembled and installed using the instructions

provided.

WARNING: Failure to provide adequate structural strength

for this component can result in serious personal injury or

damage to equipment! It is the installer’s responsibility to

make sure the structure to which this component is attached

can support five times the combined weight of all equipment.

Reinforce the structure as required before installing the

component.

WARNING:

Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all components located within the mounting system of the

CPAE Extension Columns does not exceed 500 lbs (226.8 kg).

• The weight capacity of the CPAE Extension Columns

may be LIMITED to the lowest weight capacity of any

other component or accessory used within the

mounting system.

WARNING: Use this mounting system only for its intended

use as described in these instructions. Do not use

attachments not recommended by the manufacturer.

WARNING: Never operate this mounting system if it is

damaged. Return the mounting system to a service center for

examination and repair.

WARNING: Do not use this product outdoors.

--SAVE THESE INSTRUCTIONS--

DIMENSIONS

0.75

19.1

TRACK

1.90

48.3

1.50

38.1

NOTES:

1. CPAE STYLE COLUMNS ARE AVAILABLE IN A VARIETY OF LENGTHS

2. THE PART NUMBER WILL DESIGNATE THE LENGTH

3. STANDARD COLOR IS BLACK. AN 'S' OR 'W' AT THE END OF

THE PART NUMBER SIGNIFIES SILVER OR WHITE, RESPECTIVELY

EXAMPLES: CPAE030 = 30CM LONG, BLACK

CPAE150W = 150CM LONG, WHITE

DIMENSIONS: INCHES

[MILLIMETERS]

Installation Instructions CPAE Columns

TOOLS REQUIRED FOR INSTALLATION

PARTS

1/2"

nut driver

A (1)

[Extension column]

(CPAE-024 shown as example)

B (1)

[cable cover]

(2-CPAE300)

INSTALLATION

IMPORTANT ! : The following procedure assumes that

the UL Listed CPA ceiling plate (not included) has been

properly installed following instructions provided with

ceiling plate.

1. Install

CPAE Series Extension column

into UL Listed CPA

ceiling plate

(not included)

following instructions included

with ceiling plate.

NOTE: Installation of hex head self-tapping screws (included

with Listed Chief accessories and mounts) will be

easier when screws are carefully aligned with holes in

extension column, and a drill and nut driver is used. If a

drill will NOT be used, a small amount of pressure will

be needed to get the self-tapping screws started.

2. Secure extension column following instructions included

with ceiling plate.

WARNING:

Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all components located within the mounting system of the

CPAE Extension Columns does not exceed 500 lbs (226.8 kg).

• The weight capacity of the CPAE Extension Columns

may be LIMITED to the lowest weight capacity of any

other component or accessory used within the

mounting system.

3. Install and secure mount (not included) to lower end of

extension column (A) following instructions included with

mount.

4. Remove adhesive from back of cable cover (B).

5. Place cable cover (B) onto column (A) at desired location.

(See Figure 1)

NOTE: Cable cover (B) may be cut into smaller pieces if

desired. Use a utility knife to cut cover and place pieces

at desired mounting locations on column.

Figure 1

6. Route cables as desired through cover (B). (See Figure 1)

Produktspezifikationen

Marke:	Chief
Kategorie:	Beamerzubehör
Modell:	CPAE080W
Produkttyp:	Erweiterungs-Set
Produktfarbe:	Weiß
Höhe:	800 mm
Höchstgewichtskapazität:	226.7 kg
Paketgewicht:	1720 g
Zertifizierung:	TUV
Menge pro Packung:	1 Stück(e)
Länge (mm):	800 mm
Durchmesser:	48.3 mm
Kompatibilität:	CPA Plates
Verbessertes Kabelmanagement:	Ja