Chief CMA101 Bedienungsanleitung

Chief Beamerzubehör CMA101

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Chief CMA101 (8 Seiten) in der Kategorie Beamerzubehör. Dieser Bedienungsanleitung war für 55 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/8

I N S T A L L A T I O N I N S T R U C T I O N S

Ceiling Plate

Spanish Product Description

German Product Description

Portuguese Product Description

Italian Product Description

Dutch Product Description

French Product Description

CMA101

CMA101 Installation Instructions

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and

subsidiaries (collectively "Milestone"), intend to make this

manual accurate and complete. However, Milestone makes no

claim that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Milestone

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Milestone assumes

no responsibility for accuracy, completeness or sufficiency of

the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.

IMPORTANT SAFETY INSTRUCTIONS!

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all components are

properly assembled and installed using the instructions

provided.

WARNING: Failure to provide adequate structural strength

for this component can result in serious personal injury or

damage to equipment! It is the installer’s responsibility to

make sure the structure to which this component is attached

can support five times the combined weight of all equipment.

Reinforce the structure as required before installing the

component.

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all components attached to the CMA101 mount does not

exceed 500 lbs (226.8 kg).

NOTE: The weight capacity of the CMA101 mount may be

LIMITED to the lowest weight capacity of any other

component located within the mounting system.

WARNING: Use this mounting system only for its intended

use as described in these instructions. Do not use

attachments not recommended by the manufacturer.

WARNING: Never operate this mounting system if it is

damaged. Return the mounting system to a service center for

examination and repair.

WARNING: Do not use this product outdoors.

WARNING: Do NOT attach to vertical mounting surfaces

such as walls or angled ceilings!

IMPORTANT ! : The CMA101 mount is designed to be:

• mounted to double 2" x 4" wood stud cross bracing

between two 2" x 4" ceiling joists using 5/16" x 3-1/2"

Grade 2 lag bolts (not included); or

• mounted to a concrete ceiling with a minimum

thickness of 8" and a maximum drywall covering of

5/8" using 5/16" x 3-1/2" Grade 2 lag bolts (not

included) with UX10 OR AF8 anchors (not included); or

•

suspended from four 5/16-18 Grade ASTM A307 or

better threaded rods (not included) which are secured

to Unistrut®

(with a maximum span of 48")

by 5/16"

Grade 2 or better nuts (not included).

Threaded rods

must have 18 threads per square inch.

--SAVE THESE INSTRUCTIONS--

Installation Instructions CMA101

TOOLS REQUIRED FOR INSTALLATION

PARTS

DIMENSIONS

5/32" (security-included)

Hardware required - not included

(dependent on installation method)

1. Install to wood ceiling joists

• 5/16" x 3-1/2" (minimum length) Grade 2 lag bolts (Qty. 4)

2. Install to concrete

• 5/16" x 3-1/2" (minimum length) Grade 2 lag bolts (Qty. 4)

• Fischer UX10 concrete anchors OR Toggler AF8 concrete anchors (Qty. 4)

3. Install to Unistrut

• 5/16-18 threaded rod (Qty. 4)

• 5/16" Grade 2 nuts (Qty. 8)

• 5/16" Grade 2 washers (Qty. 8)

5/32"

7/32" (wood)

5/16" (AF8)

3/8" (UX10)

A (1)

[CMA101]

B (1)

5/16-18 x 3/8"

C (1)

5/16-18 x 5/16"

D (1)

5/32" (security)

(security)

.69

17.463

1 1/2" NPS

2.00

50.800

127

5.00

127

5.00

101.600

4.00

101.600

9.931

.39

2.00

50.800

DIMENSIONS: [MILLIMETERS]

INCHES

Produktspezifikationen

Marke:	Chief
Kategorie:	Beamerzubehör
Modell:	CMA101
Produktfarbe:	Schwarz
Befestigungstyp:	Wand
Höchstgewichtskapazität:	227 kg
Warentarifnummer (HS):	85299097
Gewicht (imperial):	500 Pfund