Chef's Choice SteelPro 470 Bedienungsanleitung
Chef's Choice
Messenslijper
SteelPro 470
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Chef's Choice SteelPro 470 (8 Seiten) in der Kategorie Messenslijper. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/8
SteelPro®
Model 470 Series
SteelPro®
Congratulations!
As an owner of the Chef’sChoice
® SteelPro® Model 470, you will be able to
experience for the first time the pleasure of cutting and slicing with perfectly
steeled edges. The SteelPro® creates a unique cutting edge much superior to
that obtainable with conventional steels. The SteelPro
® edge will consistently
have a good “bite” and will, uniquely, stay very sharp as you continue to use the
SteelPro®. No skill is required and even a first time user will find it easy to use.
The SteelPro® eliminates the uncertainty, inconsistency and intimidation of the
age-old method of unguided manual steeling. With the SteelPro
® you will in just
seconds be able to consistently obtain superior edges with that extra “bite” and
sharpness unmatched by even the most experienced professionals.
You will quickly realize how much less intimidating it is to use the SteelPro
®
compared to conventional uncontrolled manual steeling.
2
Description of SteelPro
®
The SteelPro® is designed to be used either right or left handed (Figure 1 and 2).
The soft-touch handle is shaped and sized for a comfortable hold. The SteelPro
®
can be hung by the metal ring attached to the handle or stored flat in a drawer
or on a shelf.
The SteelPro® contains two unique rods made of a special high carbon steel
hardened to about Rockwell C-65, which is much harder than any commercially
available cutlery. Consequently these special rods will show very little wear from
the repeated contact with the edge of your finest and hardest knives.
Two precision knife guides, with planes set at about 23 degrees to the vertical
center line of the hardened rods, control and precisely align the face of the knife
as the balde is inserted into the slot between the guide and the blade retention
spring. In use, the blade is inserted alternately into the left and then the right
slots and pulled forward so that the knife edge slides along the surface of the
hardened steel rod.
The steel rods are supported by elastomeric materials that allow the rods to
deflect when excessive force is applied to the blade. This feature and the ultra-
precise and consistent angular contact maintained stroke after stroke between
the knife edge and the hardened steel rods are key to optimizing the edge
structure. Viewed under a microscope, the SteelPro
® edge presents a uniform
formation of exceedingly fine and super-sharp micro-serrations. Furthermore,
even after many uses of the SteelPro® on a knife, the original edge geometry is
maintained and the edge does not round-off like it would using a conventional
steel with no angle control.
3
Figure 1. Right-handed use. FIgure 2. Left-handed use.
Produktspezifikationen
| Marke: | Chef's Choice |
| Kategorie: | Messenslijper |
| Modell: | SteelPro 470 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Chef's Choice SteelPro 470 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Messenslijper Chef's Choice
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
Bedienungsanleitung Messenslijper
- Messenslijper SilverCrest
- Messenslijper Beper
- Messenslijper Guzzanti
- Messenslijper Ambiano
- Messenslijper Fagor
- Messenslijper Melissa
- Messenslijper Steba
- Messenslijper Studio
- Messenslijper IKEA
- Messenslijper Graef
- Messenslijper Bartscher
- Messenslijper Orava
- Messenslijper Salter
- Messenslijper Powerplus
- Messenslijper IdeenWelt
- Messenslijper EdgeCraft
- Messenslijper Tower
- Messenslijper Berkel
- Messenslijper GARDE
- Messenslijper Sharpal
Neueste Bedienungsanleitung für -Kategorien-
18 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
5 September 2024
3 September 2024
3 September 2024
3 September 2024
31 August 2024