Chauvet STRIKE Array Flush Bracket Bedienungsanleitung

Chauvet Nicht kategorisiert STRIKE Array Flush Bracket

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Chauvet STRIKE Array Flush Bracket (12 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
English EN
Español ES
Français FR
Deutsch DE
Nederlands NL
Quick Reference Guide
Model ID: STRIKEARRAYFLUSHBRACKET
Scan the QR code to
access the product page,
warranty terms, and the
complete User Manual
1
EN
QUICK REFERENCE GUIDE
Strike Array Flush Bracket QRG Rev. 2
Safety Notes
These Safety Notes include important information about installation, use, and maintenance of the Strike Array Flush Bracket.
What is Included
Mounting
Before mounting this product, read the Safety Notes. Make sure the mounting clamps are capable of supporting the
weight of the product. For the Chauvet line of mounting clamps, go to http://trusst.com/productcategory/truss-clamps.
Mounting Diagram
• ALWAYS:
• Use a safety cable when mounting this product overhead.
• DO NOT:
• Leave any flammable material within 50 cm of this product while operating.
• Submerge this product (adhere to standards for the published IP rating). Regular outdoor operation is fine.
• Permanently install outdoors in locations with extreme environmental conditions. This includes, but is not
limited to:
• Exposure to a marine/saline environment (within 3 miles of a saltwater body of water).
• Locations where normal temperatures exceed the temperature ranges in this manual.
• Locations that are prone to flooding or being buried in snow.
• Other areas where the product will be subject to extreme radiation or caustic substances.
• In the event of a serious operating problem, stop using immediately.
• Strike Array Flush Bracket
• Quick Reference Guide
Safety cable
Mounting clamp
Strike Array
Flush Bracket
EN
2
Strike Array Flush Bracket QRG Rev. 2
QUICK REFERENCE GUIDE
Mounting Strike Array Products Attached in Series
The Strike Array Flush Bracket can support up to 16 cells or 4 Strike Array products. Do not exceed!
Attach the
safety cable
of the first
product to
the
mounting
point
Attach the
safety cables
of the
following
products to
the
preceding
product
Up to
16 cells
Strike Array
Flush Bracket


Produktspezifikationen

Marke: Chauvet
Kategorie: Nicht kategorisiert
Modell: STRIKE Array Flush Bracket

Brauchst du Hilfe?

Wenn Sie Hilfe mit Chauvet STRIKE Array Flush Bracket benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Chauvet

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-