Chauvet EZ Gobo Bedienungsanleitung
Chauvet
Effektmaschine
EZ Gobo
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Chauvet EZ Gobo (44 Seiten) in der Kategorie Effektmaschine. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/44
Quick Reference Guide
EZgoboâ„¢ QRG EN
2
About This Guide
The EZgoboâ„¢ Quick Reference Guide (QRG) has basic product information.
Disclaimer
The information and specifications in this QRG are subject to change without
notice.
Safety Notes
The following Safety Notes include important information about installation, use,
and maintenance.
• Always connect the product to a grounded circuit.
• Make sure the power cord is not crimped or damaged.
• Always disconnect the product from the power source before cleaning it.
• Never disconnect the product from the power source by pulling or tugging on
the cord.
•
If mounting the product overhead, make sure there is adequate support for the
product’s weight and always secure the product using a safety cable.
• Make sure there are no flammable materials close to the product when it is
operating.
• Avoid direct eye exposure to the light source while the product is on.
•
Do not touch the product’s housing when the product is operating because the
housing can be very hot.
• The product is not intended for permanent installation.
• The product is for indoor use only. It is rated at IP20.
• Do not expose the product to rain or moisture.
• Always connect the product to a power source that is within the voltage range
stated on the label or rear panel of the product.
• Never connect the product to a dimmer or rheostat.
• Always install the product in a location with adequate ventilation.
• Always leave at least 20 in (50 cm) between the product and adjacent
surfaces.
• Be sure that no ventilation slots on the product’s housing are blocked.
• Do not operate the product at an ambient temperature higher than
104 ° ° . F (40 C)
• Never carry the product by the power cord or any moving part.
• Always use the mounting clamp or carry handle to lift the product.
• If there is a serious operating problem, stop using the product immediately.
• Never try to repair the product. Repairs carried out by untrained people can
lead to damage or malfunction.
• To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
Contact
• From outside the U.S., UK, Ireland, Mexico, or Benelux, contact the
distributor of record to request support or return a product.
• From inside the U.S., UK, Ireland, Mexico, or Benelux, use the information
in Contact Us at the end of this QRG.
EZgoboâ„¢ QRG EN
3
What Is Included
• EZgobo™
• External Power Supply
• 10 pack of wedding- ready gobos
• IRC-6
• Warranty c ard
• Quick Reference Guide
To Begin
Carefully unpack the EZgoboâ„¢ and check that all the parts are in the package,
and are in good condition.
If the box, or any of the contents, appear damaged from shipping, or show signs
of mishandling, save all the
packaging and file a claim with the carrier
immediately, do not notify Chauvet
. Failure to report damage to the carrier
immediately, or failure to have all the packaging available for inspection, could
invalidate the claim.
For other issues, such as missing components or parts, damage not related to
shipping, or concealed damage, file a claim with C hauvet
within 7 days of
delivery. For information on contacting C hauvet ee , s Contact Us at the end of this
QRG.
Description
The EZgoboâ„¢ , is a lightweight battery-powered gobo projector that comes
attached to a magnetic bracket with a scissor clip
for a variety of mounting
options. It comes with 10 wedding- -ready gobos for a variety of wedding themed
looks. The EZgobo 10â„¢ has a
watt LED that can safely project through a colored,
transparency gobo for long periods of time. This product
has zoom and focus
knobs to adjust the size of the gobo projection. It is compatible with the included
IRC- 6.
Overview
Gobo Holder
And
Mounting
Zoom Knob
Tilt
Adjustment
Knob
IR Sensor
Focus Knob
Rear View
Scissor Clip
(detachable)
DC Power
On/Off
Switch
Magnetic
Base
Safety
Loop
Front
Produktspezifikationen
| Marke: | Chauvet |
| Kategorie: | Effektmaschine |
| Modell: | EZ Gobo |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Chauvet EZ Gobo benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Effektmaschine Chauvet
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
Bedienungsanleitung Effektmaschine
- Effektmaschine NGS
- Effektmaschine Velleman
- Effektmaschine König
- Effektmaschine Pyle
- Effektmaschine Antari
- Effektmaschine BeamZ
- Effektmaschine Stairville
- Effektmaschine American DJ
- Effektmaschine Karma
- Effektmaschine Adj
- Effektmaschine Behringer
- Effektmaschine Eurolite
- Effektmaschine Showtec
- Effektmaschine Monoprice
- Effektmaschine Lexicon
- Effektmaschine Monacor
- Effektmaschine HQ
- Effektmaschine Viking
- Effektmaschine Elation
- Effektmaschine Cameo
- Effektmaschine HQ Power
- Effektmaschine Qtx
- Effektmaschine Midas
- Effektmaschine Black Lion Audio
- Effektmaschine Martin
- Effektmaschine Steren
- Effektmaschine TCM FX
- Effektmaschine Fun Generation
- Effektmaschine Futurelight
- Effektmaschine IMG Stage Line
- Effektmaschine TC Electronic
- Effektmaschine Lab Gruppen
- Effektmaschine Hazebase
- Effektmaschine Doepfer
- Effektmaschine Valueline
- Effektmaschine Laserworld
- Effektmaschine Klark Teknik
- Effektmaschine Eliminator Lighting
- Effektmaschine BoomTone DJ
- Effektmaschine Sagitter
- Effektmaschine Drawmer
- Effektmaschine DJPower
- Effektmaschine The Confetti Maker
- Effektmaschine Blizzard
- Effektmaschine ColorKey
- Effektmaschine Lotronic
- Effektmaschine Valcom
- Effektmaschine Evo-Lite
- Effektmaschine IGS Audio
- Effektmaschine Magmatic
- Effektmaschine Technical Pro
- Effektmaschine Rosco
- Effektmaschine Showven
Neueste Bedienungsanleitung für -Kategorien-
10 Oktober 2024
8 Oktober 2024
6 Oktober 2024
2 Oktober 2024
2 Oktober 2024
2 Oktober 2024
30 September 2024
30 September 2024
28 September 2024
25 September 2024