Challenge T-43ELC Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Challenge T-43ELC (7 Seiten) in der Kategorie Gewölbe. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/7
Digital Home Safe
Always Read the Instruction Manual
NEVER LOCK YOUR SPARE OVERRIDE KEYS OR THE INSTRUCTION MANUAL IN THE SAFE.
ONCE THE BATTERIES DEPLETE, YOU WILL NEED TO USE THE KEYS TO OPEN THE SAFE.
SPARE KEYS ARE UNAVAILABLE!
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING THE
OPERATION AND MAINTENANCE OF THE SAFE
COMPLETELY READ AND UNDERSTAND THE MANUAL BEFORE SECURING ITEMS IN THE SAFE
SAVE THIS MANUAL FOR FUTURE REFERENCE
MODELS: T-43ELC
SAFE DIAGRAM
-1-
Locking knob LCD (display)
Key pad
Instructions
4 x ‘AA’
batteries
Override keys 4 x rawlbolts
Concealed hinges
Key lock cover
Dia.1
NOTE: This safe is NOT re proof.
NOTE: This safe has no cash rating.
CONTENTS
1 X Instruction book
2 X Manual override keys
1 X Internal mat
4 X ‘AA’ Batteries
4 X Rawlbolts
IMPORTANT INFORMATION
This safe can be programmed with two sets of codes, User and Master. After opening the safe and
installing the batteries you should change the USER and MASTER PINS, from the factories pre-set
codes, for security reasons. You could give the user code to a guest while maintaining the master code.
OPERATING THE SAFE FOR THE FIRST TIME
Use the Manual override key to open the safe.
Remove the plastic key lock cover (dia 1)•
Insert the override key; turn it anti-clockwise, at the same time turn the locking knob clockwise and pull •
open the safe.
See • BATTERY REPLACEMENT
Keep the safe door open until you have set the PIN code.•
LCD DISPLAY
To hide the numbers from being displayed when entered, Press “START” twice before entering you’re •
PIN. “-” will be displayed instead of the number.
SPECIFICATION
T-43ELC
SIZE : 43 (w) x 35 (h) x 20 (d) Cm
NET WEIGHT: 11.25Kgs
POWER SUPPLY: 4x ‘AA’ 1.5V Batteries
INTERNAL VOLUME: 30.19 Litre
-2-
PROGRAMMING YOUR USER PIN NUMBER ( )personal identication number
DEFAULT FACTORY USER PIN: 0000
Each time a button is pressed, a beep will be heard. This is a safety feature so that you will know when
the safe is being accessed and cannot be switched off.
Keep PIN Codes in a safe place.
Do not use personal information like birthdays, telephone numbers etc.
Write down your PIN number so you do not forget it. (any •
combination of numbers from 3 to 8 digits)
With the door open, remove the security cap by unscrewing it, •
(dia.2).
Depress the red reset button located at the back of the door.•
The LCD screen displays “SEt-CodE”•
You now have 20 seconds to enter your PIN.•
Enter your PIN code. You can enter 3-8 numbers. •
Press “START” button•
“In” will be displayed on the LCD screen and two beeps will be •
heard
You PIN has now been set.•
Screw the security cap back onto the red reset button. Ensure you do this for security reasons.
While the door is open familiarise yourself with the door opening procedure, and leave the door open
untilyouaresatisedthatyoufullyunderstandtheopeningandclosingmethod.Youcanre-setthePIN
at any time by following the above procedure.
PROGRAMMING YOUR MASTER PIN NUMBER ( )personal identication number
DEFAULT FACTORY MASTER PIN: 8888
Each time a button is pressed, a beep will be heard. This is a safety feature so that you will know when
the safe is being accessed and cannot be switched off.
Keep PIN Codes in a safe place.
Do not use personal information like birthdays, telephone numbers etc.
Write down your PIN number so you do not forget it. (any •
combination of numbers from 3 to 8 digits)
With the door open, remove the security cap by unscrewing it, •
(dia.3).
Depress the red reset button located at the back of the door.•
The LCD screen displays “SEt-CodE”•
Press “START” button•
The LCD screen displays “oLd-CodE”•
EntertheexistingPIN(atrstthiswillbethefactoryPIN)•
Press “START” button•
The LCD screen displays “SET”•
You now have 20 seconds to enter your PIN.•
Enter your new PIN code. You can enter 3-8 numbers. •
Press “START” button•
The LCD screen displays “rE-inPut”•
Re-Enter your new PIN code.•
Press “START” button•
Dia.2
Security cap
covering reset
button
Dia.3
Security cap
covering reset
button
Produktspezifikationen
| Marke: | Challenge |
| Kategorie: | Gewölbe |
| Modell: | T-43ELC |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Challenge T-43ELC benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Gewölbe Challenge
22 August 2024
22 August 2024
22 August 2024
Bedienungsanleitung Gewölbe
- Gewölbe Hama
- Gewölbe Philips
- Gewölbe Guzzanti
- Gewölbe Thule
- Gewölbe Conrad
- Gewölbe FERM
- Gewölbe Topcraft
- Gewölbe Dometic
- Gewölbe Abus
- Gewölbe Olympia
- Gewölbe Yale
- Gewölbe Perel
- Gewölbe Workzone
- Gewölbe Westfalia
- Gewölbe Burg Wächter
- Gewölbe Honeywell
- Gewölbe Filex
- Gewölbe First Alert
- Gewölbe Master Lock
- Gewölbe Phoenix
- Gewölbe Rottner
- Gewölbe Salvus
- Gewölbe SentrySafe
- Gewölbe Juwel
- Gewölbe Toolland
- Gewölbe Kidde
- Gewölbe Royal Sovereign
- Gewölbe SereneLife
- Gewölbe Sygonix
- Gewölbe Fluke
- Gewölbe VARO
- Gewölbe Duralock
- Gewölbe EasySafe
- Gewölbe Fichero
- Gewölbe FireKing
- Gewölbe Jewel
- Gewölbe Kreator-Varo
- Gewölbe M-Locks
- Gewölbe Nauta
- Gewölbe Oxloc
- Gewölbe Protector
- Gewölbe ROMA
- Gewölbe Sentry
- Gewölbe Sistec
- Gewölbe SMC
- Gewölbe Steren
- Gewölbe Technomax
- Gewölbe Avanti
- Gewölbe Olymp
- Gewölbe Suncast
- Gewölbe Kreator
- Gewölbe Barska
- Gewölbe NOFIRE
- Gewölbe Homak Security
- Gewölbe CAWI
- Gewölbe Rottner Tresor
- Gewölbe Winholt
- Gewölbe Stamony
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
5 Oktober 2024
5 Oktober 2024
2 Oktober 2024
2 Oktober 2024
2 Oktober 2024
2 Oktober 2024