Certina Urban C031210 DS Stella Bedienungsanleitung

Certina betrachten Urban C031210 DS Stella

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Certina Urban C031210 DS Stella (3 Seiten) in der Kategorie betrachten. Dieser Bedienungsanleitung war fĂĽr 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/3
W W W. CE R TI N A. CO M 356_EN / 09.15
1/3
Analogue Quartz
Watches
User’s Manual
Display and functions
Seconds hand
Minute hand
Hour hand
Date*
Day*
* According to model
Models with a screwed crown:
IA Initial position (screwed down, not pulled out)
IB Winding position (unscrewed, not pulled out)
Analogue Quartz Watches
W W W. CE R TI N A. CO M 356_EN / 09.15
2/3
Congratulations
We congratulate you on choosing a CERTINA® watch. Meticulously
designed, using only high-quality materials and components, your watch
is protected against shocks and impacts, variations in temperature, water
and dust and also benefits from the concept.DS
To ensure the operating precision of your watch for many years to come,
we advise you to pay very careful attention to the advice provided
hereafter.
This user’s manual applies to all CERTINA® quartz, quartz solar
or autoquartz watches. Please refer to the explanations relating
specifically to your watch model.
The DS (Double Security) concept is characterised by:
– its scratch and impact resistance,
– its tough sapphire crystal,
– a gasket inside the crown and a gasket around the winding stem guar-
anteeing the water resistance of the watch even when the crown is
pulled out,
– a reinforced case back.
Recharging the accumulator
Models with screwed crown
To ensure even better water resistance, certain models are fitted with
a screwed crown. Before setting the time, date* or day*, you must first
unscrew the crown into position before you can pull it out to position IB II
or .III
Important: After every operation, the crown must be screwed back in to
maintain the water-resistance of the watch.
Quartz watches
Quartz watches are battery powered, and cannot be recharged.
Autoquartz watches
To wind an Autoquartz watch, turn the crown through a few dozen
(~50) revolutions in position (or IB for models with screwed crown). I
The automatic winding system will then ensure that the watch is fully
wound by means of your wrist movements alone. The watch needs to be
worn for several weeks to reach maximum charge, and thereby achieve
its theoretical power reserve of 100 days.
Quartz solar watches
These watches do not have a winding crown. To recharge the accumulator,
expose the dial of your watch either to the sun or to artificial light.
Settings
NB: Please take account of the information above if your watch is
fitted with a screwed crown.
Setting the time
Pull the crown out to position and turn it in either direction until the III
desired time is displayed.
On certain models with a seconds hand, you can synchronize it with an
official time signal (radio/TV/Internet). When the crown is pulled out to
position III, the seconds hand is stopped. Once the time is synchronised,
push the crown back into position (and screw it back in on models with I
a screwed crown).
Rapid correction of the date* and day*
NB: Do not perform a rapid date correction between 22:00 and
02:00.
Pull the crown out to position and turn it clockwise until the desired date II
is displayed, or counterclockwise to correct the day. During this operation,
your watch will keep operating, so you will not need to adjust the time.
Technical information
CERTINA
®
quartz watches
Boasting the precision of quartz, they generally have a power reserve
of more than 2 years in continuous use, though this varies slightly
depending on the habits of the wearer and the ambient temperature.
Similarly, the ambient temperature may affect the accuracy of quartz
movements, causing variations of around -0.5 to +0.7 seconds per day.
All you have to do is to set the time, and possibly the date if your watch
is equipped with a display of this kind (see the “Settings” section).
EOL Function – (End of Life)
The battery end of life is indicated by the seconds hand making 4-second
jumps. The watch will keep operating for a few more days, but the battery
should be removed and replaced by an approved CERTINA® service centre
as soon as possible.
CERTINA
®
Autoquartz watches
As accurate as a quartz watch yet operating without a battery, these
watches are equipped with an accumulator which automatically recharges
its energy by means your wrist movements. The oscillation movements of
your wrist turn an oscillating weight, each rotation of which activates
a micro-generator which in turn charges an accumulator with electrical
energy.
Power supply
The lithium accumulator has an average service life of more than
10 years. Never replace it with a conventional silver oxide battery, since
this would irrevocably destroy the movement.
EOE Function – (End of Energy)
Your CERTINA® Autoquartz watch is equipped with an EOE (End of Energy)
energy requirement indicator. If you observe the seconds hand jump
every 4 seconds, it means that your watch needs to be wound (see the
“Winding” section).
Water-resistance
CERTINA® watches are designed to withstand a pressure of up to 3
bar (30 m / 100 ft), 5 bar (50 m / 165 ft), 10 bar (100 m / 330 ft), 20 bar
(200 m / 660 ft) or 30 bar (300 m / 1000 ft), depending on the information
shown on the case-back.
A watch cannot be permanently guaranteed absolutely water-resistant.
It may be affected by ageing of the gaskets or by an accidental impact on
the watch. We recommend that you have your watch’s water resistance
checked once a year by an approved CERTINA® service centre.
Care and maintenance
Temperature
Do not expose your watch to sudden temperature changes (exposure to
sunlight followed by immersion in cold water) or extreme temperatures
(over 60°C (140°F) or below 0°C (32°F).
Magnetic fields
Do not expose your watch to intense magnetic fields such as those
generated by loudspeakers, mobile phones, computers, refrigerators or
other electromagnetic appliances.
Shocks and impacts
Avoid thermal shocks or impacts, since they may harm your watch.
In the event of a violent impact please have your watch checked by an
approved CERTINA® service centre.
Analogue Quartz Watches
W W W. CE R TI N A. CO M 35 6_E N / 0 9 . 15
3/3
Harmful products
Prevent your watch from coming into any direct contact with solvents,
detergents, perfumes, cosmetic products etc., since they may damage
the bracelet, the case or the gaskets.
Cleaning
We would advise you to clean your watch regularly (except for
the leather strap) using a soft cloth and lukewarm soapy water.
After immersion in salty water, rinse your watch in fresh water and
leave it to dry completely.
Quartz or Autoquartz watches
If you are considering not wearing your watch for a few weeks or months,
we would advise you to pull the crown out to the last stop before storing it.
This will reduce energy consumption.
Services
Like any precision instrument, a watch must be serviced regularly for
optimum operation. As a general rule, we recommend that you have
your watch checked every 3 to 4 years by your approved CERTINA®
retailer or service centre. However, please note that depending on the
climate and the conditions of use of the watch, a shorter interval may
be required. To enjoy meticulous standards of service and to ensure
your guarantee remains in force, please always contact an approved
CERTINA® retailer or service centre.
Availability of spare parts
From the stoppage date of the watch production, CERTINA® guarantees
the availability of its spare parts for a minimum period of 10 years for
standard watches, and for a period of up to 20 years for gold watches.
If for any reason production of a particular spare part is stopped or
deferred, CERTINA® reserves the right, at its sole discretion, to offer the
customer an alternative solution.
Collection and treatment of end of life quartz watches*
This symbol indicates that this product should not be disposed
of as household waste. It must be returned to an approved
collection point. By following this procedure you will contribute to
safeguarding the environment and human health. Recycling the materials
will help to conserve natural resources.
Battery type: silver oxide and zinc button cell.
Autoquartz: manganese dioxide and lithium button cell.
* Valid in European Community member states and in any countries with
comparable legislation.

Produktspezifikationen

Marke: Certina
Kategorie: betrachten
Modell: Urban C031210 DS Stella

Brauchst du Hilfe?

Wenn Sie Hilfe mit Certina Urban C031210 DS Stella benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung betrachten Certina

Certina

Certina Urban C035.410.22.037.01 DS Caimano Bedienungsanleitung

21 August 2024
Certina

Certina Urban C031210 DS Stella Bedienungsanleitung

21 August 2024
Certina

Certina DS Caimano Bedienungsanleitung

19 August 2024
Certina

Certina DS-1 Bedienungsanleitung

17 August 2024

Bedienungsanleitung betrachten

Neueste Bedienungsanleitung fĂĽr -Kategorien-

Casio

Casio GW-3000BD-1AER Bedienungsanleitung

9 Oktober 2024
Citizen

Citizen Cal 411X Bedienungsanleitung

7 Oktober 2024
Casio

Casio Edifice EFA-112D-1AVEF Bedienungsanleitung

7 Oktober 2024
Casio

Casio Baby-G BGA-200-1E2ER Bedienungsanleitung

6 Oktober 2024
Jaguar

Jaguar J627 Bedienungsanleitung

6 Oktober 2024
Citizen

Citizen CAL 4633 Bedienungsanleitung

5 Oktober 2024
Auriol

Auriol IAN 277495 Bedienungsanleitung

4 Oktober 2024
La Crosse Technology

La Crosse Technology WT-941 Bedienungsanleitung

4 Oktober 2024
Spin Master

Spin Master Dumas SP-5081-11 Bedienungsanleitung

4 Oktober 2024
Michael Kors

Michael Kors Kors Access Scout Hutton MKT4024 Bedienungsanleitung

3 Oktober 2024