Canon TS-E 135MM F2.8L Macro Bedienungsanleitung
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂŒr Canon TS-E 135MM F2.8L Macro (38 Seiten) in der Kategorie Objektiv. Dieser Bedienungsanleitung war fĂŒr 32 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/38
TS-E50mm f/2.8L MACRO
TS-E90mm f/2.8L MACRO
TS-E135mm f/4L MACRO
Instructions
ENG
ENG-1
Thank you for purchasing a Canon product.
The Canon TS-E50mm f/2.8L MACRO, Canon TS-E90mm f/2.8L MACRO, and Canon TS-E135mm
f/4L MACRO are tilt-shift lenses* designed for EOS cameras that allow macro shooting up to 0.5
times magniïŹcation.
Camera Firmware
Please use the latest version of ïŹrmware with the camera in use. For details on whether the
ïŹrmware is the latest version or not, and for details on updating the ïŹrmware, please check the
Canon website.
Conventions used in this instruction
Warning to prevent lens or camera malfunction or damage.
Supplementary notes on using the lens and taking pictures.
* Depending on the camera model, the orientation or movement required for operation differs somewhat.
For nomenclature and tilt operation, see the corresponding page for each model.
TS-E50mm f/2.8L MACRO
Nomenclature: p.5, p.6
Using tilt: p.15, p.16
TS-E90mm f/2.8L MACRO, TS-E135mm f/4L MACRO
Nomenclature: p.7, p.8
Using tilt: p.17, p.18
ENG-2
Safety Precautions
Precautions to ensure that the camera is used safely. Read these precautions thoroughly. Make sure all details are
observed in order to prevent risks and injury to the user and other people.
Caution Details pertaining to risks that may result in injury.
Do not leave the camera in locations subject to high or low temperatures. This may result in the camera becoming
excessively hot or cold, which may cause burns or other injuries when touched.
Do not insert your fingers inside the camera. Failure to observe this may result in injury.
Before mounting or detaching the lens, or turning the lens for rotation or TS rotation, always lock the lens in a
non-tilted and non-shifted position. Not doing so may cause injury.
When tilting or shifting the lens, avoid touching protrusions on the tilt mechanism and shift mechanism. Not
doing so may cause injury.
Caution Details pertaining to risks that may result in damage to property.
Do not leave the lens in excessive heat such as in a car in direct sunlight. High temperatures can cause the lens to
malfunction.
Do not turn knobs forcefully. This may cause malfunction.
When mounting or detaching the lens or turning the lens for rotation, always lock the lens in a non-tilted and non-shifted
position. Not doing so may cause malfunction.
Warning Details pertaining to risks that may result in death or serious injury.
Do not look at the sun or a bright light source through the lens or single-lens reflex camera. Doing so could result
in loss of vision. Looking at the sun directly through the lens is especially hazardous.
Whether it is attached to the camera or not, do not leave the lens under the sun without the lens cap attached.
This is to prevent the lens from concentrating the sunâs rays, which could cause a fire.
Produktspezifikationen
| Marke: | Canon |
| Kategorie: | Objektiv |
| Modell: | TS-E 135MM F2.8L Macro |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Canon TS-E 135MM F2.8L Macro benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Objektiv Canon
13 April 2024
8 April 2024
31 MĂ€rz 2024
23 MĂ€rz 2024
13 MĂ€rz 2024
3 Februar 2024
11 Januar 2024
30 Dezember 2023
19 Dezember 2023
13 Dezember 2023
Bedienungsanleitung Objektiv
- Objektiv Sony
- Objektiv Panasonic
- Objektiv Olympus
- Objektiv Fujifilm
- Objektiv Nikon
- Objektiv Sigma
- Objektiv Hasselblad
- Objektiv Leica
- Objektiv Pentax
- Objektiv Lensbaby
- Objektiv Tamron
- Objektiv InLine
- Objektiv Godox
- Objektiv Rokinon
- Objektiv NiSi
- Objektiv Pelco
- Objektiv Brinno
- Objektiv Sensei
- Objektiv Tokina
- Objektiv Laowa
Neueste Bedienungsanleitung fĂŒr -Kategorien-
17 April 2024
12 April 2024
9 April 2024
7 April 2024
5 April 2024
2 April 2024