Canon PowerShot SD1200 IS Bedienungsanleitung

Canon Kamera PowerShot SD1200 IS

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Canon PowerShot SD1200 IS (136 Seiten) in der Kategorie Kamera. Dieser Bedienungsanleitung war für 30 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/136
Camera User Guide
Make sure you read this guide before using the camera.
Store this guide safely so that you can use it in the future.
ENGLISH
COPY
2
Check if the following items are included in your camera package. If anything
is missing, contact the retailer from which you purchased the camera.
A memory card is not included.
Adobe Reader is required to view the PDF manuals.
Checking the Package Contents
Camera Battery Pack NB-6L
(with Terminal Cover)
Interface Cable
IFC-400PCU
AV Cable
AVC-DC400
Wrist Strap
WS-DC7
Warranty
Card
Getting Started DIGITAL CAMERA
Solution Disk
“Canon Customer
Support” Leaflet
Battery Charger
CB-2LY/CB-2LYE
Also refer to the PDF manuals on the CD-ROM.
After installation, shortcut icons appear on the desktop. If the software
installation fails, you can find the manuals in the Readme folder on the
CD-ROM.
Camera User Guide (This Guide)
Once you have mastered the basics, use the camera’s many features
to shoot more challenging photos.
Personal Printing Guide
Read when you want to connect the camera to a printer and print.
Software Starter Guide
Read when you want to connect the camera to a computer.
Explains how to install and use the software on the DIGITAL CAMERA
Solution Disk.
Download ZoomBrowser EX/ImageBrowser Software Guide (PDF)
from:
http://web.canon.jp/imaging/information-e.html
COPY
3
Test Shots
Take some initial test shots and play them back to make sure the images
were recorded correctly. Please note that Canon Inc., its subsidiaries and
affiliates, and its distributors are not liable for any consequential damages
arising from any malfunction of a camera or accessory, including memory
cards, that results in the failure of an image to be recorded or to be recorded
in a way that is machine readable.
Warning Against Copyright Infringement
The images recorded with this camera are intended for personal use. Do not
record images that infringe upon copyright laws without the prior permission
of the copyright holder. Please be advised that in certain cases the copying
of images from performances, exhibitions, or commercial properties by
means of a camera or other device may contravene copyright or other legal
rights even if the image was shot for personal use.
Warranty Limitations
This camera’s warranty is only effective in the country of sale. If there is a
problem with the camera while abroad, please return it to the country of sale
before proceeding with a warranty claim to a Canon Customer Support Help
Desk. For Canon Customer Support contacts, please see the customer
support list supplied with your camera.
LCD Monitor
The LCD monitor is produced with extremely high-precision manufacturing
techniques. More than 99.99% of the pixels operate to specification, but
occasionally non-performing pixels may appear as bright or dark dots. This
is not a malfunction and has no effect on the recorded image.
Camera Body Temperature
Please take care when operating the camera for an extended period as the
camera body may become warm. This is not a malfunction.
Memory Cards
The various types of memory cards that can be used in this camera are
collectively referred to as memory cards in this guide.
Read This First
COPY
4
What Do You Want to Do?
Shoot
4
Shoot, leaving it to the camera to make settings . . . . . . . . . . . . 22
Shoot to match special conditions. . . . . . . . . . . . . . . . . . . . 52 – 54
Focus on faces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22, 60, 76
Shoot in places where I cannot use the flash (turn off the flash) 55
Shoot pictures with me in them too (self-timer). . . . . . . . . . . 59, 60
Insert the date and time into my shots . . . . . . . . . . . . . . . . . . . . 58
Take close-up pictures of subjects (macro shooting) . . . . . . . . . 63
Take close-up pictures of subjects using the zoom
(digital macro shooting). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Take sepia toned or black and white pictures . . . . . . . . . . . . . . . 70
Change the size of picture I want to take (recording pixels) . . . . 65
Take pictures continuously . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Shoot without the effects of camera shake
(image stabilization) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
y
Aquarium
(p. 54) S
Underwater
(p. 54) Z
Low light
(p. 54)
H t
Indoors
(p. 53)
Fireworks
(p. 53)
I F w P
With nightscapes
(p. 52)
At the beach
(p. 53)
With snowscapes
(p. 54)
V
Kids and pets
(p. 53)
Portraits
(p. 52)
Take good people shots
U
Sunsets
(p. 53)
Take good landscapes
Shoot various other scenes
O
Foliage
(p. 54)
COPY
What Do You Want to Do?
5
Shoot without the effects of camera shake even
in low light conditions (High ISO Auto) . . . . . . . . . . . . . . . . . 54, 68
Make dark subjects appear brighter (i-Contrast). . . . . . . . . . . . . 81
Use the viewfinder to shoot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
View 1
Look at my pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Automatically play back pictures (slideshow) . . . . . . . . . . . . . . . 92
Look at my pictures on a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Quickly search pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90, 91
Erase pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26, 97
Protect pictures from accidental erasure. . . . . . . . . . . . . . . . . . . 96
E
Shoot movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
View movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Shoot/View Movies
2
Easily print pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Print
Save
Save images to a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Other
3
Turn off sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Use the camera abroad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
COPY
6
Chapters 1 – 3 explain the basic operations and frequently used functions of
this camera. Chapters 4 onward explain the advanced functions, letting you
learn more as you read each chapter.
Checking the Package Contents .......2
Read This First ..................................3
What Do You Want to Do? ................4
Safety Precautions.............................8
Charging the Battery........................12
Inserting the Battery and
Memory Card .............................14
Setting the Date and Time...............17
Setting the Display Language..........19
Formatting Memory Cards ...............20
Pressing the Shutter Button.............21
A Taking Pictures.......................22
1 Viewing Images..........................25
Erasing Images ................................26
Printing Images................................27
E Shooting Movies.........................29
Viewing Movies ................................31
Transferring Images to a Computer.32
Accessories .....................................36
Separately Sold Accessories ...........38
Components Guide..........................40
Information Displayed on
the Screen..................................42
Power Saving Function
(Auto Power Down)....................44
m FUNC. Menu Basic
Operations .................................45
n Menu – Basic Operations ....46
Changing the Sound Settings..........47
Returning the Camera to
Default Settings......................... 48
Low Level Memory Card
Formatting ................................. 49
Changing the Screen Brightness .... 50
4 Shooting in Various Conditions . 52
! Turning the Flash Off.................. 55
Zooming in More Closely on
Subjects (Digital Zoom)............. 56
Inserting the Date and Time............ 58
Ò Using the Self-Timer................... 59
" Using the Face Self-Timer.......... 60
G Shooting in Program AE ............. 62
h Turning the Flash On................... 62
u Shooting Far Away Subjects
(Infinity)...................................... 63
e Shooting Close-ups (Macro)....... 63
R Zooming In on Close Subjects
(Digital Macro) ........................... 64
Changing the Recording Pixels
(Image Size) .............................. 65
Changing the Image Quality
(Compression Ratio) ................. 65
b Adjusting the Brightness
(Exposure Compensation)......... 67
W Continuous Shooting ................. 67
Changing the ISO Speed ................ 68
Table of Contents
1 Getting Started ....................11
2 Learning More......................39
3 Shooting in Special
Conditions and Commonly
Used Functions................... 51
4
Selecting Settings
Yourself
.............................. 61
COPY
Table of Contents
7
Adjusting the White Balance........... 69
Changing the Tone of
an Image (My Colors) ............... 70
Shooting Using a TV Monitor .......... 71
Î Shooting Using the Two Second
Self-Timer ................................. 71
$ Customizing the Self-Timer ........ 72
Changing the Composition with
the Focus Lock.......................... 73
Shooting Using the Viewfinder........ 73
Changing the AF Frame Mode........ 76
% Shooting with the AF Lock ........ 77
Magnifying the Focal Point.............. 78
Changing the Metering Mode.......... 79
& Shooting with the AE Lock ........ 79
( Shooting with the FE Lock ........ 80
Shooting with Slow Synchro ...... 80
@ Making Dark Subjects Appear
Brighter (i-Contrast) .................. 81
Œ Red-Eye Correction ................... 82
Shooting Long Exposures .......... 83
Changing the Image Quality ........... 86
AE Lock/Exposure Shift .................. 87
Other Shooting Functions ............... 87
Playback Functions......................... 88
g Searching Images by
Sets of 9 (Index Display)........... 90
d Searching for Images Using the
Jump Display ............................. 91
. Viewing Slideshows .................... 92
Checking the Focus......................... 93
k Magnifying Images .....................94
+ Changing Image Transitions.......94
Viewing Images on a TV .................95
: Protecting Images.....................96
/ Erasing All Images......................97
\ Rotating Images.......................... 98
= Resizing Images ......................... 99
@ Making Dark Subjects
Appear Brighter (i-Contrast) .... 100
] Correcting the Red-Eye Effect .. 101
Selecting Images for Printing
(DPOF) .................................... 102
Changing Functions ...................... 108
Changing Shooting Functions ....... 111
Changing Playback Functions.......114
Using Household Power................ 116
Troubleshooting............................. 117
List of Messages
that Appear on the Screen....... 120
Functions Available in Each
Shooting Mode ........................122
Menus............................................ 124
Specifications ................................ 128
Handling Precautions .................... 131
Index.............................................. 132
5
Getting More Out of
Your Camera
..................... 75
6 Using Various Functions
for Shooting Movies ........... 85
7 Using Playback and Other
Functions ............................ 89
8 Customizing the Camera .. 107
9 Useful Information ............ 115
COPY
8
Before using the camera, please ensure that you read the safety precautions described
below. Always ensure that the camera is operated correctly.
The safety precautions noted on the following pages are intended to prevent injuries to
yourself and other persons, or damage to the equipment.
Be sure to also check the guides included with any separately sold accessories you use.
Camera
Warning Denotes the possibility of serious injury or death.
Caution Denotes the possibility of injury.
Caution Denotes the possibility of damage to the equipment.
Warning
Do not look through the camera viewfinder at bright light sources (the sun,
etc.).
This could damage eyesight.
Do not trigger the flash in close proximity to human eyes.
Exposure to the intense light produced by the flash may damage eyesight. In
particular, remain at least one meter (39 inches) away from infants when using the
flash.
Store this equipment out of the reach of children and infants.
Strap: Putting the strap around a child’s neck could result in asphyxiation.
Memory card, day/date battery: Dangerous if accidentally swallowed. If this occurs,
contact a doctor immediately.
Do not attempt to disassemble or alter any part of the equipment that is not
expressly described in this guide.
To avoid the risk of injury, do not touch the interior of the camera if it has been
dropped or otherwise damaged.
Stop operating the camera immediately if it emits smoke, a strange smell, or
otherwise behaves abnormally.
Do not use organic solvents such as alcohol, benzine, or thinner to clean the
equipment.
Do not allow liquids or foreign objects to enter the camera.
This could result in electrical shock or fire.
If liquid or foreign objects come into contact with the camera interior, immediately turn
the camera power off and remove the battery.
Use only recommended power sources.
Using other power sources could result in electrical shock or fire.
Safety Precautions
COPY
Safety Precautions
9
Battery, Battery Charger
Other Warnings
Use only recommended batteries.
Do not place the battery near or in direct flame.
Do not let the battery come into contact with water (e.g. sea water) or other liquids.
Do not attempt to disassemble, alter or apply heat to the battery.
Avoid dropping or subjecting the battery to severe impacts.
This may cause explosions or leaks, resulting in fire, injury and damage to the
surroundings. In the event that a battery leaks and the eyes, mouth, skin or clothing
contacts these substances, immediately flush with water and seek medical assistance.
If the battery charger becomes wet, unplug it from the outlet and consult your camera
distributor or the closest Canon Customer Support Help Desk.
Use only the specified battery charger to charge the battery.
Do not cut, damage, alter or place heavy items on the power cord.
Unplug the power cord periodically and wipe away any dust and dirt that has
collected on the plug, the exterior of the power outlet, and the surrounding area.
Do not handle the power cord with wet hands.
This could result in electrical shock or fire.
Do not play the supplied CD-ROM(s) in any CD player that does not support
data CD-ROMs.
Playing the CD-ROM(s) in an audio CD player (music player) could damage the
speakers. It is also possible to suffer hearing loss from listening with headphones to
the loud sounds of a CD-ROM played on a music CD player.
Caution
Be careful not to bang the camera or subject it to strong impacts or shocks
when hanging it by the strap.
Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
Do not use the equipment in a manner that exceeds the rated capacity of the
electrical outlet or wiring accessories. Do not use if the power cord or plug are
damaged, or not fully plugged into the outlet.
This could result in electrical shock or fire.
Avoid using, placing or storing the camera in the following places.
-
-
-
-- Places subject to strong sunlight.
-
-
-
-- Places subject to temperatures above 40 °C (104 °F).
-
-
-
-- Humid or dusty areas.
These could cause leakage, overheating or an explosion, resulting in fire, burns or
other injuries. High temperatures may also cause deformation of the casing.
COPY
Safety Precautions
10
Do not allow dirt or metal objects (such as pins or keys) to contact the charger
terminals or plug.
This could result in electrical shock, fire or other damage.
Caution
Do not aim the camera at bright light sources (the sun, etc.).
Doing so may cause malfunctions or damage the image sensor (CCD).
When using the camera on a beach or at a windy location, be careful not to
allow dust or sand to enter the camera.
Do not use the flash with dirt, dust or other items stuck to the surface, or if it is
covered by your fingers or clothing.
This may cause the camera to malfunction.
Unplug the battery charger from the power outlet after recharging is complete,
or when you are not using it.
Do not place anything, such as cloth, on top of the battery charger while it is
charging.
Leaving the unit plugged in for a long period of time may cause it to overheat and
distort, resulting in fire.
Remove and store the battery when you are not using the camera.
If the battery is left inside the camera, damage caused by leakage may occur.
Before you discard batteries, cover the terminals with tape or other insulators.
Contacting other metal materials in waste containers may lead to fire or explosions.
Keep the battery out of the reach of pets.
If the battery is bitten, this could cause leakage, overheating or an explosion, resulting
in fire, burns or other injuries.
Do not sit in a chair with the camera in your pocket.
Doing so may cause malfunctions or damage the LCD monitor.
When putting the camera in your bag, ensure that hard objects do not come into
contact with the LCD monitor.
Do not attach accessories to the strap.
If this occurs, it may cause malfunctions or damage the LCD monitor.
COPY
11
Getting Started
This chapter explains preparations before shooting, how to shoot in
A mode, and then how to view, erase and print the images you
take. The latter part of this chapter explains how to shoot and view
movies and transfer images to a computer.
Attaching the Strap/Holding the Camera
Attach the included strap and place it around your wrist to avoid dropping
the camera during use.
Keep your arms tight against your body while holding the camera firmly by
the sides. Be sure that your fingers do not block the flash.
1
Strap
COPY
12
Use the included charger to charge the battery.
Remove the cover.
Insert the battery.
Align the marks on the battery and
charger, then insert the battery by sliding it
in and down .
Charge the battery.
For CB-2LY: Flip out the plug and plug
the charger into a power outlet .
For CB-2LYE: Plug the power cord into
the charger, then plug the other end into a
power outlet.
The charge lamp lights red and charging
starts.
The charge lamp will light green when
charging has finished. Charging takes
approx. 1 hour and 55 minutes.
Remove the battery.
Unplug the battery charger from the power
outlet, then remove the battery by sliding it
in and up .
Charging the Battery
To protect the battery and prolong its life, do not charge it for longer than
24 hours continuously.
COPY
Charging the Battery
13
Approximate Number of Shots That Can Be Taken
* The number of shots that can be taken is based on the Camera & Imaging Products
Association (CIPA) measurement standard.
Under some shooting conditions, fewer shots can be taken.
Battery Charge Indicator
An icon or message will appear on the screen indicating the battery’s charge state.
Charge the battery on the day, or the day before, it will be used.
Charged batteries continue to discharge naturally even if they are not used.
How to store the battery for long periods.
Deplete and remove the battery from the camera. Attach the terminal cover and
store the battery. Storing a battery for long periods of time (about a year) without
depleting it may shorten its life span or affect its performance.
The battery charger can also be used when abroad.
The charger can be used in regions that have 100 – 240 V (50/60 Hz) AC power.
If the plug does not fit the outlet, use a commercially available plug adapter. Do
not use devices, such as electrical transformers for foreign travel, because they
will cause malfunctions.
The battery may develop a bulge.
This is a normal characteristic of the battery and does not indicate a problem.
However, if the battery bulges to the point where it will no longer fit into the
camera, please contact a Canon Customer Support Help Desk.
If the battery is quickly depleted even after charging, it has reached the end of its
life span.
Purchase a new battery.
Number of shots LCD monitor on.* 260 shots
LCD monitor off. 700 shots
Playback Time (Hours) 6 hours
Display Summary
Good.
Slightly depleted, but sufficient.
(Blinking red) Nearly depleted.
“Change the battery pack. Depleted. Recharge the battery.
Using the battery and charger effectively
Attach the cover to a charged battery so that
the mark is visible.
COPY
14
Insert the included battery and a memory card into the camera.
Check the card’s write-protect tab.
If the memory card has a write-protect tab,
you will not be able to record images if the
tab is in the locked position. Slide the tab
up until you hear a click.
Open the cover.
Slide the cover , and open it .
Insert the battery.
Insert the battery as shown until it locks
into place with a click.
Be sure to insert the battery in the correct
direction or it will not properly lock into
place.
Insert the memory card.
Insert the memory card as shown until it
locks into place with a click.
Be sure the memory card is oriented
correctly. Inserting the memory card in the
wrong direction could damage the
camera.
Inserting the Battery and Memory Card
Terminals
Terminals
COPY
Inserting the Battery and Memory Card
15
Close the cover.
Close the cover , and slide it until it
locks into place with a click.
Removing the Battery and Memory Card
Remove the battery.
Open the cover and press the battery lock
in the direction of the arrow.
The battery will pop up.
Remove the memory card.
Push the memory card in until you hear a
click, then slowly release it.
The memory card will pop up.
COPY
Inserting the Battery and Memory Card
16
Approximate Number of Shots per Memory Card
Values are based on the default settings.
The number of shots that can be taken will vary depending on camera settings, the
subject and the memory card used.
You can check the number of shots that can be taken when the camera is in a
Shooting Mode (p. 22).
Compatible Memory Cards
SD memory cards
SDHC memory cards
MultiMediaCards
MMCplus memory cards
HC MMCplus memory cards
SD and SDHC memory cards have a write-protect tab. If this tab is in the locked
position, [Card Locked!] will appear on the screen and you will not be able to take
or erase images.
Memory Card 2 GB 8 GB
Number of shots 749 2994
Can you check the number of shots that can be taken?
What is the write-protect tab?
Number of shots that can be taken
COPY
17
The Date/Time settings screen will appear the first time the camera is turned
on. Since the dates and times recorded into your images are based on these
settings, be sure to set them.
Turn on the camera.
Press the power button.
The Date/Time screen will appear.
Set the date and time.
Press the qr buttons to select an option.
Press the op buttons to set a value.
Make the setting.
Press the m button.
Once the date and time have been set,
the Date/Time screen will close.
Pressing the power button will turn off the
camera.
Set the correct date and time. If you have not set the date and time, the Date/
Time screen will appear each time you turn on the camera.
Setting the Date and Time
Reappearing Date/Time screen
COPY
Setting the Date and Time
18
Changing the Date and Time
You can change the current date and time settings.
Display the menus.
Press the n button.
Select [Date/Time] in the 3 tab.
Press the qr buttons to select the 3 tab.
Press the op buttons to select [Date/
Time], then press the m button.
Change the date and time.
Follow Steps 2 and 3 on p. 17 to adjust
the setting.
To close the menus, press the n
button.
The camera has a built-in date/time battery (backup battery) that allows the
date/time settings to be retained about three weeks after the battery pack has
been removed.
By inserting a charged battery or connecting an AC adapter kit (sold separately,
p. 38) the date/time battery can be charged in about 4 hours even if the camera
is not turned on.
If the date/time battery is depleted, the Date/Time menu will appear when you turn
the camera on. Follow the steps on p. 17 to set the date and time.
Date/Time battery
COPY
19
You can change the language displayed in the LCD monitor menus and
messages.
Set the playback mode.
Press the 1 button.
Display the settings screen.
Press and hold the m button , then
press the n button .
Set the display language.
Press the opqr buttons to select a
language, then press the m button.
Once the display language has been set,
the language menu will close.
Setting the Display Language
You can also change the display language by pressing the n button,
selecting the 3 tab, and selecting the [Language] menu item.
COPY
20
Before you use a new memory card or one that has been used in other
devices, you should format the card with this camera. Formatting (initializing)
a memory card erases all data on the memory card. As you cannot retrieve
the erased data, exercise adequate caution before formatting the memory
card.
Display the menu.
Press the n button.
Select [Format].
Press the qr buttons to select the 3 tab.
Press the op buttons to select [Format],
then press the m button.
Format the memory card.
Press the qr buttons to select [OK], then
press the m button.
The memory card will be formatted.
When formatting has finished, the menu
screen will reappear.
Formatting Memory Cards
Formatting or erasing data on a memory card merely changes the file
management information on the card and does not ensure its contents
are completely erased. Be careful when transferring or disposing of a
memory card. When disposing of a memory card, take precautions such
as physically destroying the card to prevent personal information leaks.
The total capacity of the memory card displayed in the formatting screen
may be less than indicated on the memory card.
COPY
21
The shutter button has two stops. To take images that are in focus, be sure
to first press the shutter button lightly (halfway) to focus, then take the shot.
Press halfway (lightly to the first
stop).
The camera focuses and automatically
selects the necessary settings for
shooting, such as the brightness.
When the camera focuses, it will beep
twice and the indicator will light green.
Press fully (to the second stop).
The camera plays the shutter sound and
takes the shot.
Pressing the Shutter Button
If you just press the shutter button fully without pausing halfway, the
image may not be in focus.
COPY
22
Since the camera can determine the subject and shooting conditions, you
can let it automatically select the best settings for the scene and just shoot.
The camera can also detect and focus on faces, setting the color and
brightness to optimal levels.
Turn on the camera.
Press the power button.
The start-up sound will play, and the
startup screen will appear.
Pressing the power button again will turn
the camera off.
Select the A mode.
Set the mode switch to A.
When you point the camera toward the
subject, the camera will make a slight
noise as it determines the scene.
The camera focuses on the subject it
judges to be the main subject, and
displays the icon for the determined scene
in the upper left of the screen.
When faces are detected, a white frame
appears on the face of the main subject,
while gray frames appear on other
detected faces.
Even if the detected faces move, the
camera will follow the faces within a
certain range.
Compose the shot.
Moving the zoom lever toward i will
zoom in on your subject, making it appear
larger. Moving the lever toward j will
zoom out from your subject, making it
appear smaller.
A Taking Pictures
COPY
A
A
A
AA Taking Pictures
23
Focus.
Press the shutter button halfway to focus.
When the camera focuses, it will beep
twice and the indicator will light green
(orange when the flash will fire).
Green AF frames appear where the
subject is in focus.
Several AF frames will appear when the
camera focuses on more than one point.
Shoot.
Press the shutter button fully.
The camera will play the shutter sound
and shoot. The flash will automatically fire
in low light conditions.
The indicator will blink green while the
image is recorded to the memory card.
The image will appear on the screen for
about two seconds.
You can take a second picture even while
an image is displayed by pressing the
shutter button.
The screen does not turn on when you turn on the camera?
Press the l button to turn on the screen.
The camera does not play any sounds?
Pressing the l button while turning on the
camera power will turn off all
sounds except for warning sounds. To turn the sounds on, press the n
button, select the 3 tab, and then select [Mute]. Use the qr buttons to select
[Off].
AF Frames
What if...
COPY
A
A
A
AA Taking Pictures
24
The image comes out dark even if the flash fired when shooting?
The subject is too far away for the flash to reach. Shoot within the effective flash
range of approximately 30 cm – 4.2 m (12 in. – 14 ft.) at maximum wide angle,
and approximately 30 cm – 2.4 m (12 in. – 7.9 ft.) at maximum telephoto.
The indicator blinks orange and the camera beeps once when the shutter
button is pressed halfway?
Your subject is too close. When the camera is at maximum wide angle, move
about 3 cm (1.2 in.) or more away from your subject and shoot. Move about
30 cm (12 in.) or more away when the camera is at maximum telephoto.
The lamp lights when the shutter button is pressed halfway.
To reduce red-eye and to assist in focusing, the lamp may light when shooting in
dark areas.
The h icon blinks when you try to take an image?
When flash recharging begins, the flash icon will blink. You will be able to shoot
once charging is complete.
Scene Icons
The camera displays an icon for the scene it has determined and then
automatically focuses and selects the optimum settings for subject
brightness and color.
* Displays when the camera is attached to a tripod.
Background
Subject
Bright
Including Blue Skies
Sunsets
Dark
Backlit Backlit
When Using
Tripod
People *
Subjects Other
Than People
Landscapes
*
Close Subjects – –
Icon Background
Color
Gray Light Blue Orange Dark Blue
Under certain conditions, the icon that displays may not match the actual
scene. Especially when there is an orange or blue colored background (a
wall for example), or the “Blue Skies” icons may appear and it may
not be possible to shoot with the appropriate color. If this happens, try
shooting in the G mode (p. 62).
COPY
25
You can view your images on the screen.
Select the playback mode.
Press the 1 button.
The last image you took will appear.
Select an image.
Pressing the q button will cycle through
the images in reverse order.
Pressing the r button will cycle through
the images in the order they were taken.
The images change more quickly if you
keep the qr buttons pressed, but they
will appear coarse.
Pressing the 1 button while the lens is
extended will cause the shooting screen
to reappear.
The lens will retract after approximately 1
minute elapses. If you press the 1 button
with the lens retracted, the power will turn
off.
Pressing the 1 button while the camera is off turns the camera on in playback
mode. Pressing it again turns the camera off. Pressing the shutter button halfway
while in playback mode causes the shooting screen to reappear.
1 Viewing Images
Switching to and from playback mode
COPY
26
You can select and erase images one at a time. Please note that erased
images cannot be recovered. Exercise adequate caution before erasing an
image.
Select the playback mode.
Press the 1 button.
The last image you took will appear.
Select an image to erase.
Press the qr
buttons to display an image
to erase.
Erase the image.
Press the p button.
[Erase?] appears.
Press the qr buttons to select [Erase],
then press the m button.
The displayed image will be erased.
To exit instead of erasing, press the
qr
buttons to select [Cancel], then press the
m button.
Erasing Images
COPY
27
You can easily print the images you have taken if you connect the camera to
a PictBridge compliant printer (sold separately).
Items to Prepare
Camera and PictBridge compliant printer (sold separately)
Interface cable supplied with the camera (p. 2)
Turn off the camera and printer.
Connect the camera to the printer.
Open the cover, and insert the small end
of the plug firmly into the camera terminal
in the direction shown.
Insert the cable’s larger plug into the
printer. For connection details, refer to the
user guide provided with the printer.
Turn on the printer.
Turn on the camera.
Press the 1 button to turn on the camera.
will appear.
Select an image to print.
Press the qr buttons to select an image.
Printing Images
COPY
Printing Images
28
Print images.
Press the m button.
Use the buttons to select [Print], and op
press the m button.
Printing will start.
If you want to print additional images,
repeat Steps 5 and 6 after printing has
completed.
After printing has completed, turn off the
camera and printer, and unplug the
interface cable.
Canon-Brand PictBridge Compliant Printers (Sold Separately)
By connecting your camera to one of the Canon-brand PictBridge compliant
printers below, you can print your images without having to use a computer.
For more information, visit your nearest Canon retailer.
Refer to the Personal Printing Guide on the best ways to print.
Compact Photo Printers
(SELPHY Series)
Inkjet Printers
(PIXMA series)
COPY
29
The camera can automatically select all settings so that you can shoot
movies just by pressing the shutter button.
Select the E
E
E
EE mode.
Set the mode switch to E.
Compose the shot.
Moving the zoom lever toward i will
zoom in on your subject, making it appear
larger. Moving the lever toward j will
zoom out from your subject, making it
appear smaller.
Focus.
Press the shutter button halfway to focus.
When the camera focuses, it will beep
twice and the indicator will light green.
E Shooting Movies
Shooting Time
COPY
E
E
E
EE Shooting Movies
30
Shoot.
Press the shutter button fully.
The camera will start shooting the movie,
and [ Rec.] and the elapsed time will
appear on the screen.
Once shooting begins, take your finger off
the shutter button.
If you change the composition of your shot
during shooting, the focus will stay the
same, but the brightness and tone will
automatically adjust.
Do not touch the microphone while
shooting.
Do not press any buttons other than the
shutter button. Otherwise, the sound the
buttons make will be recorded in the
movie.
Stop shooting.
Press the shutter button fully again.
The camera will beep once and stop
shooting the movie.
The indicator will blink green, and the
movie will record to the memory card.
Shooting will automatically stop when the
memory card fills.
Estimated Shooting Times
Shooting times are based on default settings. Shooting time can be checked on the
screen in Step 1.
Recording will automatically stop when either the clip file size reaches 4 GB or the
recording time reaches approximately 1 hour.
Elapsed Time
Microphone
Memory Card 2 GB 8 GB
Shooting Time 16 min. 0 sec. 1 hr. 3 min. 57 sec.
COPY
31
You can view your movies on the screen.
Select the playback mode.
Press the 1 button.
The last image you shot will appear.
appears on movies.
Select a movie.
Press the qr buttons to select a movie,
then press the m button.
The movie control panel will appear on the
screen.
Play the movie.
Press the qr buttons to select , then
press the m button.
The movie will play.
You can pause/resume the movie by
pressing the m button again.
Press the op buttons to adjust the
volume.
After the movie finishes,
appears.
Viewing Movies
COPY
32
You can use the included software to transfer your camera images to a
computer.
System Requirements
Even though these are recommended system requirements, not all
computer functions can be guaranteed.
Windows
Macintosh
OS Windows Vista (including Service Pack 1)
Windows XP Service Pack 2, Service Pack 3
Computer model The above OS should be pre-installed on computers with built-in
USB ports.
CPU Pentium 1.3 GHz or higher
RAM Windows Vista: 1 GB or more
Windows XP: 512 MB or more
Interface USB
Free Hard Disk
Space
Canon Utilities
ZoomBrowser EX: 200 MB or more
PhotoStitch: 40 MB or more
Display 1,024 × 768 pixels or higher
OS Mac OS X (v10.4 – v10.5)
Computer model The above OS should be pre-installed on computers with built-in
USB ports.
CPU PowerPC G4/G5 or Intel Processor
RAM 512 MB or more
Interface USB
Free Hard Disk
Space
Canon Utilities
ImageBrowser: 300 MB or more
PhotoStitch: 50 MB or more
Display 1,024 × 768 pixels or higher
Transferring Images to a Computer
COPY
Transferring Images to a Computer
33
Items to Prepare
Camera and computer
DIGITAL CAMERA Solution Disk supplied with the camera (p. 2)
Interface cable supplied with the camera (p. 2)
Preparations
Windows XP and Mac OS X (v10.4) are used for these explanations.
Install the software.
Windows
Place the DIGITAL CAMERA Solution
Disk in the computer’s CD-ROM drive.
Begin installation.
Click [Easy Installation] and follow the
onscreen instructions to proceed with the
installation.
When the install finishes, click
[Restart] or [Finish].
Remove the CD-ROM.
Remove the CD-ROM when your desktop
screen appears.
Macintosh
Place the CD-ROM in the computer’s
CD-ROM drive and double-click the
icon.
The screen on the left displays.
Click [Install], and follow the onscreen
instructions to proceed with the
installation.
COPY
Transferring Images to a Computer
34
Connect the camera to the
computer.
Turn off the camera.
Open the cover, and insert the cable’s
small plug into the camera terminal in the
direction as shown.
Insert the cable’s larger plug into the
computer’s USB port. For connection
details, refer to the user guide provided
with the computer.
Turn on the camera.
Press the 1 button to turn on the camera.
Open CameraWindow.
Windows
Select [Canon CameraWindow] and click
[OK].
CameraWindow will appear.
If CameraWindow does not appear, click
the [Start] menu and select [All Programs]
or [Programs], followed by
[Canon Utilities] [CameraWindow]
[CameraWindow] [CameraWindow].
COPY
Transferring Images to a Computer
35
Macintosh
CameraWindow will appear when you
establish a connection between the
camera and computer.
If CameraWindow does not appear, click
the [CameraWindow] icon on the Dock
(the bar which appears at the bottom of
the desktop).
Transferring Images with a Computer
Click [Transfer Untransferred Images].
All images not previously transferred will
transfer to the computer.
After the transfer finishes, turn off the
camera and unplug the cable.
For further operations, refer to the
Software Starter Guide.
Images transferred to the computer will be sorted by date and saved in
separate folders in the “My Pictures” folder for Windows or the “Picture
folder for Macintosh.
COPY
36
Accessories
Wrist Strap
WS-DC7
Interface Cable IFC-400PCU*
1
DIGITAL CAMERA
Solution Disk
AV Cable AVC-DC400*
1
AC Adapter Kit ACK-DC40
Compact Power Adapter
CA-DC10
Supplied with
Camera
*1 Also available for purchase separately.
*2 See the user guide supplied with the printer for more information on the printer and
interface cables.
Battery Pack NB-6L
(with Terminal Cover)*1
Battery Charger
CB-2LY/CB-2LYE*1
Power Cord
DC Coupler
DR-40
COPY
Accessories
37
High-Power
HF-DC1
Inkjet Printers
(PIXMA series)*
2
Compact Photo
Printers*2
(SELPHY series)
Card Reader
Windows/
Macintosh
Video IN Terminal
Audio IN Terminal TV/Video
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with genuine
Canon accessories. Canon shall not be liable for any damage to this product and/or
accidents such as fire, etc., caused by the malfunction of non-genuine Canon
accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this
warranty does not apply to repairs arising out of the malfunction of non-genuine Canon
accessories, although you may request such repairs on a chargeable basis.
Waterproof Case
WP-DC29
Memory Card
COPY
38
The following camera accessories are sold separately.
Some accessories are not sold in some regions, or may no longer be
available.
Power Supplies
AC Adapter Kit ACK-DC40
This kit lets you power the camera using household power. Recommended for
powering the camera for an extended period of time or when connecting to a
computer. Cannot be used to charge the battery inside the camera.
Battery Charger CB-2LY/CB-2LYE
An adapter for charging Battery Pack NB-6L.
Battery Pack NB-6L
Rechargeable lithium-ion battery.
The charger can be used in regions that have 100 – 240 V (50/60 Hz) AC power.
If the plug does not fit the outlet, use a commercially available plug adapter. Do
not use devices such as electrical transformers for foreign travel because they will
cause malfunctions.
Other Accessories
Waterproof Case WP-DC29
Installing the camera into this waterproof case lets you take underwater shots at
depths down to 40 meters (130 feet), or take worry-free pictures in the rain, at
the beach, or on the ski slopes.
High-Power Flash HF-DC1
This attachable supplementary flash can illuminate subjects that are too distant
for the light from the built-in flash to reach.
The battery charger can also be used when abroad.
Separately Sold Accessories
COPY
39
Learning More
This chapter explains the parts of the camera and what displays on
the screen, as well as, the basic operating instructions.
Conventions Used in this Guide
Icons are used in the text to represent the camera buttons and switches.
Language that displays on the screen appears inside [ ] (square
brackets).
The directional buttons and FUNC./SET button are represented by the
following icons.
: Troubleshooting tips.
: Hints for getting more out of your camera.
: Things you should be careful about.
: Supplemental information.
(p. xx): Reference pages. “xx” stands for page number.
This chapter assumes all functions are at their default settings.
2
(Right button)
(FUNC./SET button)
(Up button)
(Left button)
(Down button)
COPY


Produktspezifikationen

Marke: Canon
Kategorie: Kamera
Modell: PowerShot SD1200 IS
Bildschirmdiagonale: 2.5 Zoll
Breite: 88.5 mm
Tiefe: 21.8 mm
Gewicht: 120 g
Mitgelieferte Kabel: AV,USB
Produktfarbe: Orange
Akku-/Batterietyp: NB-6L
Akku-/Batterietechnologie: Lithium-Ion (Li-Ion)
Höhe: 54.8 mm
Betriebstemperatur: 0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb: 10 - 90 %
Display: LCD
Unterstützte Videoformate: AVI
USB-Version: 2.0
Megapixel (ca.): 10 MP
Digitaler Zoom: 4 x
Maximale Video-Auflösung: 640 x 480 Pixel
Eingebauter Blitz: Ja
Fokuseinstellung: Auto
Größe des Bildsensors: 1/2.3 Zoll
Kompatible Speicherkarten: mmc,sd,sdhc
Abmessungen (BxTxH): 88.5 x 21.8 x 54.8 mm
Fokus: TTL
Brennweitenbereich: 6.2 - 18.6 mm
Videoaufnahme: Ja
Blendenbereich (F-F): 2.8 - 4.9
Sensor-Typ: CCD
Kamera-Typ: Kompaktkamera
Maximale Bildauflösung: 3648 x 2736 Pixel
Bildstabilisator: Ja
Optischer Zoom: 3 x
Normaler Fokusbereich (Weitwinkel): 0.3 - ∞ m
Belichtungstyp: Auto
Belichtungsmessung: Centre-weighted,Spot
Blitz-Modi: auto,Flash off,Red-eye reduction,Slow synchronization
Blitzlicht-Messwertspeicherung: Ja
Blitzreichweite (Weitwinkel): 0.3 - 4.2 m
Blitzreichweite (Tele): 0.3 - 2.4 m
Blitzladezeit: 10 s
Bildschirmauflösung (numerisch): 230000 Pixel
PictBridge: Ja
Weißabgleich: auto,Cloudy,custom modes,daylight,Fluorescent,Tungsten
Bildstile: beach,Children,Fireworks,Night,party (indoor),Portrait,Sunset,Underwater
Fotoeffekte: black&white,Neutral,Sepia,Vivid
Kamera Wiedergabe: movie,single image,slide show
Histogramm: Ja
Bildbearbeitung: resizing,rotating
Kamera Verschlusszeit: 15 - 1/1500 s
Normaler Fokusbereich: 0.3 - ∞ m
Motion-JPEG Framerate: 30 fps
Makro-Fokusbereich (Tele): 0.3 - 0.5 m
Makro-Fokusbereich (Weitwinkel): 0.03 - 0.5 m
Digitale-SLR: Nein
Brennweite (äquivalent 35 mm Kleinbild): 35 - 105 mm
Videofunktionalität: Ja
Kombinierter Zoom: 12 x
Effektive Sensor-Auflösung: 10000000 Pixel
Individuelle Farbeinstellung: Ja

Brauchst du Hilfe?

Wenn Sie Hilfe mit Canon PowerShot SD1200 IS benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Kamera Canon

Bedienungsanleitung Kamera

Neueste Bedienungsanleitung für -Kategorien-