Canon Extender RF 2x Bedienungsanleitung
Canon
Objektivadapter
Extender RF 2x
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Canon Extender RF 2x (2 Seiten) in der Kategorie Objektivadapter. Dieser Bedienungsanleitung war für 23 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
Nomenclature
① Mount index (lens side)
② Mount index (camera side)
③ Lens release lever
④ Rubber ring
Thank you for purchasing a Canon product.
The Canon Extender RF1.4x and Extender RF2x increase the focal
length of the attached RF lens by 1.4x and 2x respectively.
When Extender RF1.4x is attached, the lens maximum aperture will be
smaller (darker) by 1 stop. With Extender RF2x, the maximum aperture
will be smaller by 2 stops. In any case, the camera will compensate the
exposure automatically.
Caution Details pertaining to risks that may result in injury or
damage to other objects.
● Do not leave the product in places exposed to extremely high
or low temperatures. The product may cause burns or injury when
touched.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Do not make any changes or modifications to the equipment unless otherwise
specified in the instructions. If such changes or modifications should be made, you
could be required to stop operation of the equipment.
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B) / NMB-3 (B)
■ Attaching and Detaching the Extender
First attach the Extender to the lens, then attach it to the camera.
To detach it, follow the same procedure in reverse.
To detach the Extender from the lens, slide the lens release lever and
then turn the Extender counterclockwise.
■ Safety Precaution
z Do not leave the product in excessive heat such as in a car in direct
sunlight. High temperatures can cause the product to malfunction.
z You cannot attach two or more Extenders on the same camera.
z The rear mount on the Extender has been fitted with a rubber ring
to improve dust-resistance and water-resistance performance. This
rubber ring may cause friction marks to appear around the camera’s
lens mount, although this will have no effect on usage. Rubber rings
can be replaced at Canon Service Center (chargeable).
z Using the Extender may limit the minimum shooting length possible
according to the product’s specifications.
z Autofocusing slows down when the lens is used with the Extender, in
order to maintain the precision of autofocus control.
■ Usable RF Lenses
RF600mm F11 IS STM
RF800mm F11 IS STM
RF100-500mm F4.5-7.1 L IS USM
■ Specifications
Mount: Canon RF mount
Lens construction: RF1.4x: 7 elements in 4 groups
RF2x: 9 elements in 5 groups
Dimensions (Max. dia. x length):
RF1.4x: Approx. 71.2 dia. x 20.3 mm / 2.8 x 0.8 in.,
RF2x: Approx. 71.2 dia. x 39.3 mm / 2.8 x 1.5 in.
Weight: RF1.4x: Approx. 225 g / 7.9 oz.,
RF2x: Approx. 340 g / 12.0 oz.
Case: LP811
Front Cap: Extender Cap RF
Rear Cap: Lens Dust Cap RF
• The maximum diameter, length and weight listed are for the Extender itself
only.
• All data listed is measured according to Canon standards.
• Product specifications and appearance are subject to change without
notice.
CT1-B085-A
1119Ni © CANON INC. 2019
Extender
RF1.4x / RF2x
Instructions
ENG
③
③
①
①
②
②
④
④
Produktspezifikationen
| Marke: | Canon |
| Kategorie: | Objektivadapter |
| Modell: | Extender RF 2x |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Canon Extender RF 2x benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Objektivadapter Canon
22 Juli 2024
Bedienungsanleitung Objektivadapter
- Objektivadapter Panasonic
- Objektivadapter Olympus
- Objektivadapter Fujifilm
- Objektivadapter Sigma
- Objektivadapter Hasselblad
- Objektivadapter Praktica
- Objektivadapter Kenko
- Objektivadapter Vello
- Objektivadapter Fotodiox
- Objektivadapter Viltrox
Neueste Bedienungsanleitung für -Kategorien-
11 Oktober 2024
15 September 2024
6 September 2024
30 August 2024
30 August 2024
30 August 2024
27 August 2024
21 August 2024
21 August 2024
20 August 2024