Canon EF-M 18-150mm f/3.5-6.3 IS STM Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Canon EF-M 18-150mm f/3.5-6.3 IS STM (4 Seiten) in der Kategorie linse. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/4
ENG-1
❸
CT1-8615-000
❶
❷
❸
Wide end
Telephoto end
Zoom ring
ENG EF-M LENS Instructions
EF-M18-150mm f/3.5-6.3 IS STM
①
②
③
④⑤
⑥
⑦ ⑧
Nomenclature
① Focusing ring
② Hood mount
③ Filter mounting thread
④ Lens mount index
⑤ Contacts
⑥ Zoom position index
⑦ Zoom ring
⑧ Focal length indicator
Thank you for purchasing a Canon product.
The Canon EF-M18-150mm f/3.5-6.3 IS STM is a high-
magnification zoom lens for use on Canon EOS M Series
cameras.
• "IS" stands for Image Stabilizer.
• "STM" stands for stepping motor.
Camera Firmware
Please use the latest version of rmware with the camera in
use. For details on whether the rmware is the latest version or
not, and for details on updating the rmware, please check the
Canon website.
Conventions used in this instruction
Warning to prevent lens or camera malfunction or damage.
Supplementary notes on using the lens and taking pictures.
Safety Precautions
Precautions to ensure that the camera is used safely. Read
these precautions thoroughly. Make sure all details are
observed in order to prevent risks and injury to the user and
other people.
Warning Details pertaining to risks that may result in death
or serious injury.
• Do not look at the sun or a bright light source through the
lens. Doing so could result in vision loss or blindness.
• Whether it is attached to the camera or not, do not leave
the lens under the sun without the lens cap attached. This
is to prevent the lens from concentrating the sun’s rays, which
could cause a fire.
Caution Details pertaining to risks that may result in injury.
• Do not leave the camera in locations subject to high or
low temperatures. This may result in the camera becoming
excessively hot or cold, which may cause burns or other
injuries when touched.
Caution Details pertaining to risks that may result in damage to
property.
• Do not leave the lens in excessive heat such as in a car
in direct sunlight. High temperatures can cause the lens to
malfunction.
General Precautions
Handling Precautions
• If the lens is taken from a cold environment into a warm one,
condensation may develop on the lens surface and internal
parts. To prevent condensation in this case, first put the lens
into an airtight plastic bag before taking it from a cold to warm
environment. Then take out the lens after it has warmed
gradually. Do the same when taking the lens from a warm
environment into a cold one.
• Please also read any lens related handling precautions listed
in your camera’s instruction manual.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Do not make any changes or modifications to the equipment unless
otherwise specified in the instructions. If such changes or modifications
should be made, you could be required to stop operation of the
equipment.
This equipment has been tested and found to comply with the limits for
a class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
CAN ICES-3 (B) / NMB-3 (B)
1. Mounting and Detaching the Lens
See your camera’s instructions for details on mounting and
detaching the lens.
• After detaching the lens, place the lens with the rear end
up to prevent the lens surface and contacts from getting
scratched. (fig. )❶
• Contacts that are scratched, soiled, or have fingerprints on
them may result in faulty connections or corrosion, which
may lead to malfunctions. If the contacts get soiled, clean
them with a soft cloth.
• Attach the lens cap and dust cap when disconnecting the
lens. When attaching the dust cap, align the lens mount
index with the index of the dust cap and rotate in a k
clockwise direction as shown in the illustration. (fig. ) ❷
Follow the reverse procedure to detach it.
2. Zooming
Turn the lens’ zoom ring to adjust the size of the photo field or
subject. (fig.❸)
• For wide shots, turn the zoom ring toward the wide end.
• For close-ups, turn the zoom ring toward the telephoto end.
• Be sure to finish zooming before focusing. Zooming after
focusing can affect the focus.
• Blurring may temporarily occur if the zoom ring is quickly
rotated.
• Zooming during still image exposure will result in delayed
focus. This causes any streaks of light that are captured
during exposure to be blurred.
ENG-20816Ni © CANON INC. 2016
❹
❺
3. Manual Focus
When the camera’s focus mode is set to [MF], focus manually by
turning the focusing ring. (fig. )❹
Quickly rotating the focusing ring may result in delayed focus.
• Focus mode is set using the camera. Please refer to the
camera’s instructions.
• After autofocusing in [AF+MF] mode, focus manually by
pressing the shutter button halfway and turning the focusing
ring (full-time manual focusing).
4. Image Stabilizer
This lens is equipped with an Image Stabilizer. This function
corrects camera shake, allowing users to capture sharp images.
Also, the Image Stabilizer automatically provides optimal image
stabilization depending on shooting conditions (such as shooting
still subjects and following shots). Please set the Image Stabilizer
ON or OFF using the camera settings. See your camera’s
instructions for details.
• The Image Stabilizer cannot compensate for a blurred shot
caused by a subject that moved.
• The Image Stabilizer may not be fully effective if you shoot
from a violently shaking vehicle or other transportation.
• The Image Stabilizer consumes more power than normal
shooting, resulting in fewer shots and a shorter movie shooting
time.
• When shooting a still subject, it compensates for camera
shake in all directions.
• It compensates for vertical camera shake during following
shots in a horizontal direction, and compensates for
horizontal camera shake during following shots in a vertical
direction.
• When you use a tripod, the Image Stabilizer should be
turned off to save battery power.
• Even with a monopod, the Image Stabilizer will be as
effective as during hand-held shooting. However, depending
on the shooting conditions, there are cases in which the
Image Stabilizer effect may be less effective.
■ Dynamic IS Function (Movie shooting only)
The EF-M18-150mm f/3.5-6.3 IS STM is equipped with dynamic
IS, effective when shooting while walking since it expands the IS
range.
• Achieves effective IS at the wide end.
• Automatically activates when the camera is set to Movie
Shooting.
5. Hood (sold separately)
The EW-60F hood cuts out unwanted light and protects the front
of the lens from rain, snow, and dust.
To attach the hood, align the hood’s attachment position mark with
the red dot on the front of the lens, then turn the hood as shown
by the arrow until the lens’ red dot is aligned with the hood’s stop
position mark. (fig. )❺
The hood can be reverse-mounted on the lens for storage.
• If the hood is not attached properly, vignetting (darkening of
the perimeter of the picture) may occur.
• Grasp and rotate the base of the hood when attaching
and detaching it. There are cases in which it may become
deformed if the hood is rotated with it grasped near to the
rim.
6. Filters (sold separately)
You can attach filters to the filter mounting thread on the front of
the lens.
Only one filter may be attached.
Specifications
Focal Length/Aperture 18-150mm f/3.5-6.3
Lens Construction 13 groups, 17 elements
Minimum Aperture f/22-40*
Angle of View
Diagonal: 74°20′-10°25′
Vertical: 45°30′-5°45′
Horizontal: 64°30′-8°40′
Min. Focusing Distance
at 18 mm: 0.25 m / 0.82 ft.
at 50 mm: 0.25 m / 0.82 ft.
at 150 mm: 0.45 m / 1.48 ft.
Max. Magnification
at 18 mm: 0.10x
at 50 mm: 0.27x
at 150 mm: 0.31x
Field of View
at 0.25 m / 0.82 ft.:
Approx. 148 x 223 mm / 5.83 x 8.78 in.
at 0.45 m / 1.48 ft.:
Approx. 48 x 72 mm / 1.89 x 2.83 in.
Filter Diameter 55 mm
Max. Diameter and Length 60.9 x 86.5 mm / 2.40 x 3.41 in.
Weight Approx. 300 g / 10.6 oz.
Hood EW-60F (sold separately)
Lens Cap E-55
Dust Cap Lens Dust Cap EB
Case LP816 (sold separately)
*
Applies to 1/3-stop increments. With 1/2-stop increments, it will be f/22-
38.
• Equivalent to 29-240 mm in the 35mm film format.
• The lens length is measured from the mount surface to the front
end of the lens. Add 20 mm when including the lens cap and
dust cap.
• The size and weight listed are for the lens only, except as
indicated.
• Extenders and extension tubes cannot be used with this lens.
• Aperture settings are specified on the camera. The camera
automatically compensates for variations in the aperture setting
when the camera is zoomed in or out.
• All data listed is measured according to Canon standards.
• Product specifications and appearance are subject to change
without notice.
Produktspezifikationen
| Marke: | Canon |
| Kategorie: | linse |
| Modell: | EF-M 18-150mm f/3.5-6.3 IS STM |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Canon EF-M 18-150mm f/3.5-6.3 IS STM benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung linse Canon
9 Oktober 2024
8 Oktober 2024
7 Oktober 2024
2 Oktober 2024
22 September 2024
19 September 2024
14 September 2024
5 September 2024
5 September 2024
5 September 2024
Bedienungsanleitung linse
- linse Samsung
- linse Gigabyte
- linse Sony
- linse Panasonic
- linse Gaggenau
- linse Optoma
- linse Olympus
- linse MSI
- linse Fujifilm
- linse Nikon
- linse Sigma
- linse Kodak
- linse Leica
- linse Pentax
- linse Zeiss
- linse Lensbaby
- linse Tamron
- linse Godox
- linse FLIR
- linse Vivitar
- linse Vello
- linse Cambo
- linse Hanwha
- linse Axis
- linse Aputure
- linse Tokina
- linse Laowa
- linse COLBOR
- linse Accsoon
- linse Carl Zeiss
- linse Computar
- linse Irix
- linse DZOFilm
Neueste Bedienungsanleitung für -Kategorien-
15 Oktober 2024
8 Oktober 2024
8 Oktober 2024
6 Oktober 2024
6 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024