Canon EF-M 15-45mm f/3.5-6.3 IS STM Bedienungsanleitung

Canon Objektiv EF-M 15-45mm f/3.5-6.3 IS STM

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Canon EF-M 15-45mm f/3.5-6.3 IS STM (4 Seiten) in der Kategorie Objektiv. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

ENG-1

❸

CT1-8606-002

❶

❷

❸

❹

Wide end

Telephoto end

Zoom ring

ENG EF-M LENS Instructions

EF-M15-45mm f/3.5-6.3 IS STM

①

②

③

④⑤

⑥

⑦

⑩

⑨

⑧

Nomenclature

① Focusing ring

② Hood mount

③ Filter mounting thread

④ Lens mount index

⑤ Contacts

⑥ Zoom position index

⑦ Lens retracted position index

⑧ Zoom ring

⑨

Focal length indicator

⑩

Lens-retraction switch

Thank you for purchasing a Canon product.

The Canon EF-M15-45mm f/3.5-6.3 IS STM is a standard

zoom lens developed for interchangeable-lens digital cameras

compatible with EF-M lenses*.

* The only digital interchangeable-lens cameras compatible

with EF-M lenses are EOS M series cameras. No other EOS

camera takes an EF-M lens.

• "IS" stands for Image Stabilizer.

• "STM" stands for stepping motor.

Safety Precautions

• Do not look at the sun or a bright light source through the

lens. Doing so could result in vision loss or blindness.

• Whether it is attached to the camera or not, do not leave

the lens under the sun without the lens cap attached. This

is to prevent the lens from concentrating the sun’s rays, which

could cause a fire.

Handling Cautions

• If the lens is taken from a cold environment into a warm

one, condensation may develop on the lens surface and

internal parts. To prevent condensation in this case, first

put the lens into an airtight plastic bag before taking it from a

cold to warm environment. Then take out the lens after it has

warmed gradually. Do the same when taking the lens from a

warm environment into a cold one.

• Do not leave the lens in excessive heat such as in a car in

direct sunlight. High temperatures can cause the lens to

malfunction.

• Please also refer to the handling cautions found in your

camera’s instructions.

Usage Precautions

• When using this lens, please check the Canon website for the

latest camera firmware. If the camera’s firmware is not the

latest version, be sure to update to the latest firmware.

• For details on updating firmware, please check the Canon

website.

• If you want to correct RAW images taken with this lens

mounted to an EOS M, EOS M2, or EOS M3 camera,

download the latest version of DPP (Digital Photo Professional)

from the Canon website and use the DPP software.

Conventions used in this instruction

Warning to prevent lens or camera malfunction or

damage.

Supplementary notes on using the lens and taking

pictures.

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) This device may

not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause

undesired operation.

Do not make any changes or modifications to the equipment

unless otherwise specified in the instructions. If such changes

or modifications should be made, you could be required to stop

operation of the equipment.

This equipment has been tested and found to comply with the

limits for a class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

CAN ICES-3 (B) / NMB-3 (B)

1. Mounting and Detaching the Lens

See your camera’s instructions for details on mounting and

detaching the lens.

• After detaching the lens, place the lens with the rear end

up to prevent the lens surface and contacts from getting

scratched. (fig. )❶

• If the contacts get soiled, scratched, or have fingerprints on

them, corrosion or faulty connections can result. The camera

and lens may not operate properly.

• If the contacts get soiled or have fingerprints on them, clean

them with a soft cloth.

• If you remove the lens, cover it with the dust cap. To attach

it properly, align the lens mount index and the index of the 

dust cap as shown in the diagram, and turn clockwise. (fig. ) ❷

To remove it, reverse the order.

2. Shooting Preparations and Retracting Lens

Shooting Preparations:

With the lens retract position index and zoom position index

aligned, attach the lens to the camera. Turn the camera on.

A message prompting you to operate the lens appears on the

camera’s liquid crystal monitor. Maintain pressure on the lens-

retraction switch in the [ ] direction, and slightly rotate the ▲

zoom ring in the direction of the white arrow to release the lens-

retraction switch. Further rotate the zoom ring until it clicks. The

message on the camera’s liquid crystal monitor disappears. The

lens is now ready for shooting. (The center of the no. 15 pointing

line in the focal length indicator will show above or to the left of

the zoom position index extension line.) (fig.

❸)

Retracting Lens:

Maintain pressure on the lens-retraction switch in the [ ] direction. ▲

Rotate the zoom ring in the opposite direction to the white arrow.

Align the lens retract position index and the zoom position index.

Release the lens-retraction switch to retract the lens.

Do not forcibly rotate the zoom ring if its movement becomes

constricted in the lens retract position or wide end (15 mm)

position. Doing so results in the risk of damaging the lens

retraction switch mechanism.

3. Zooming

Turn the lens’ zoom ring to adjust the size of the photo field or

subject. (fig.❹)

• For wide shots, turn the zoom ring toward the wide end.

• For close-ups, turn the zoom ring toward the telephoto end.

• Be sure to finish zooming before focusing. Zooming after

focusing can affect the focus.

• Blurring may temporarily occur if the zoom ring is quickly

rotated.

• Zooming during still image exposure will result in delayed

focus. This causes any streaks of light that are captured

during exposure to be blurred.

ENG-20615Ni © CANON INC. 2015

❺

❻

4. Manual Focus

When the camera’s focus mode is set to [MF], focus manually by

turning the focusing ring. (fig. )❺

Quickly rotating the focusing ring may result in delayed focus.

• Focus mode is set using the camera. Please refer to the

camera’s instructions.

• After autofocusing in [AF+MF] mode, focus manually by

pressing the shutter button halfway and turning the focusing

ring (full-time manual focusing).

5. Image Stabilizer

This lens is equipped with an Image Stabilizer. This function

corrects camera shake, allowing users to capture sharp images.

Also, the Image Stabilizer automatically provides optimal image

stabilization depending on shooting conditions (such as shooting

still subjects and following shots). Please set the Image Stabilizer

ON or OFF using the camera settings. See your camera’s

instructions for details.

• The Image Stabilizer cannot compensate for a blurred shot

caused by a subject that moved.

• The Image Stabilizer may not be fully effective if you shoot

from a violently shaking vehicle or other transportation.

• The Image Stabilizer consumes more power than normal

shooting, resulting in fewer shots and a shorter movie

shooting time.

• When shooting a still subject, it compensates for camera

shake in all directions.

• It compensates for vertical camera shake during following

shots in a horizontal direction, and compensates for

horizontal camera shake during following shots in a vertical

direction.

• When you use a tripod, the Image Stabilizer should be

turned off to save battery power.

• Even with a monopod, the Image Stabilizer will be as

effective as during hand-held shooting.

However, depending on the shooting environment, the

Image Stabilizer effect may be less effective.

6. Hood (sold separately)

The EW-53 hood cuts out unwanted light and protects the front of

the lens from rain, snow, and dust.

To attach the hood, align the hood’s attachment position mark with

the red dot on the front of the lens, then turn the hood as shown

by the arrow until the lens’ red dot is aligned with the hood’s stop

position mark. (fig. )❻

The hood can be reverse-mounted on the lens for storage.

• If the hood is not attached properly, vignetting (darkening of

the perimeter of the picture) may occur.

• When attaching or detaching the hood, grasp the base of

the hood to turn it. To prevent deformation, do not grasp the

rim of the hood to turn it.

7. Filters (sold separately)

You can attach filters (which are 49 mm in diameter) to the filter

mounting thread on the front of the lens.

Only one filter may be attached.

Specifications

Focal Length/Aperture 15-45mm f/3.5-6.3

Lens Construction 9 groups, 10 elements

Minimum Aperture f/22-40*

Angle of View

Diagonal: 84°30'-33°40'

Vertical: 53°30'-19°05'

Horizontal: 74°10'-28°20'

Min. Focusing Distance 0.25 m/0.82 ft.

Max. Magnification 0.25x (at 45 mm)

Field of View

Approx. 185x283-61x92 mm/

7.28x11.14-2.40x3.62 inch

(at 0.25 m/0.82 ft.)

Filter Diameter 49 mm

Max. Diameter and Length 60.9x44.5 mm/2.40x1.76 inch

(When the lens is retracted)

Weight Approx. 130 g/4.6 oz

Hood EW-53 (Sold Separately)

Lens Cap E-49

Dust Cap Lens Dust Cap EB

Case LP811 (Sold Separately)

* Applies to 1/3-stop increments. With 1/2-stop increments, it will

be f/22-38.

• Equivalent to 24-72 mm in the 35mm film format.

• The lens length is measured from the mount surface to the front

end of the lens. Add approx. 20 mm when including the lens cap

and dust cap.

• The size and weight listed are for the lens only, except as

indicated.

• Neither extenders nor close-up lenses can be used with the

lens.

• Aperture settings are specified on the camera. The camera

automatically compensates for variations in the aperture setting

when the camera is zoomed in or out.

• All data listed is measured according to Canon standards.

• Product specifications and appearance are subject to change

without notice.

Produktspezifikationen

Marke:	Canon
Kategorie:	Objektiv
Modell:	EF-M 15-45mm f/3.5-6.3 IS STM
Gewicht:	130 g
Naheinstellgrenze:	0.25 m
Autofokus:	Ja
Fokuseinstellung:	Auto/Manuell
Länge (mm):	44.5 mm
Durchmesser:	60.9 mm
Komponente für:	MILC
Kompatibilität:	EOS M
Brennweitenbereich:	15 - 45 mm
Blendenbereich (F-F):	3.5 - 6.3
Bildstabilisator:	Ja
Objektivanschluss:	Canon EF-M
Maximale Blendenzahl:	40
Betrachtungswinkel (horizontal):	74 °
Betrachtungswinkel (vertikal):	53 °
Minimum Brennweite (äquivalent 35 mm Kleinbild):	24 mm
Maximum Brennweite (äquivalent 35 mm Kleinbild):	72 mm
Minimale Blendenzahl:	3.5
Kameramarkenkompatibilität:	Canon
Betrachtungswinkel des Objektivs, diagonal:	84 - 33 °
Objektivaufbau (Elemente/Gruppen):	10/9
Objektivtyp:	Weitwinkel-Zoomobjektiv
Anzahl Blendenlamellen:	7
Filtergröße:	49 mm
Manueller Fokus:	Ja
Maximaler Zoomfaktor:	0.25 x
Bildsensor Format:	APS-C
Streulichtblende:	Ja
AF-Antrieb:	STM