Camille Bauer SIRAX BT5400 Bedienungsanleitung

Camille Bauer niet gecategoriseerd SIRAX BT5400

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Camille Bauer SIRAX BT5400 (36 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/36

Camille Bauer Metrawatt AG

Aargauerstrasse 7

CH-5610 Wohlen/Switzerland

Tel: +41 56 618 21 11

Fax: +41 56 618 21 21

info@cbmag.com

www.camillebauer.com

Operating Instructions

SIRAX BT5400

Transducer for Active, Apparent, Reactive Power,

Phase Angle and Power Factor

PM 1000291 000 00 Device handbook SIRAX BT5400 2/36

Legal information

Warning notices

In this document warning notices are used, which you have to observe to ensure personal safety and to prevent damage to property. Depending

on the degree of danger the following symbols are used:

Qualiﬁ ed personnel

The product described in this document may be handled by personnel only, which is qualiﬁ ed for the respective task. Qualiﬁ ed personnel have

the training and experience to identify risks and potential hazards when working with the product. Qualiﬁ ed personnel are also able to understand

and follow the given safety and warning notices.

Intended use

The product described in this document may be used only for the application speciﬁ ed. The maximum electrical supply data and ambient con-

ditions speciﬁ ed in the technical data section must be adhered. For the perfect and safe operation of the device proper transport and storage as

well as professional assembly, installation, handling and maintenance are required.

Disclaimer of liability

The content of this document has been reviewed to ensure correctness. Nevertheless it may contain errors or inconsistencies and we cannot

guarantee completeness and correctness. This is especially true for di erent language versions of this document. This document is regularly

reviewed and updated. Necessary corrections will be included in subsequent version and are available via our webpage http://www.camillebauer.

com.

Feedback

If you detect errors in this document or if there is necessary information missing, please inform us via e-mail to:

customer-support@camillebauer.com

If the warning notice is not followed death or severe personal injury result.will

If the warning notice is not followed damage to property or severe personal injury may result.

If the warning notice is not followed the device be damaged or not fulﬁ ll the expected may may

functionality.

PM 1000291 000 00 Device handbook SIRAX BT5400 3/36

Table of content

1. Introduction ……………………………………………………………………………………………………………4

1.1 Purpose of this document ………………………………………………………………………………………………4

1.2 Scope of supply …………………………………………………………………………………………………………4

1.3 Further documents ………………………………………………………………………………………………………4

2. Safety notes ……………………………………………………………………………………………………………4

3. Device overview ……………………………………………………………………………………………………………5

4. Mechanical mounting ………………………………………………………………………………………………………5

4.1 Mounting ……………………………………………………………………………………………………………5

4.2 Demounting of the device ………………………………………………………………………………………………5

5. Electrical connections ……………………………………………………………………………………………………6

5.1 General safety notes ……………………………………………………………………………………………………6

5.2 Cross sections and tightening torques ……………………………………………………………………………………6

5.3 Inputs ……………………………………………………………………………………………………………6

5.4 Power supply …………………………………………………………………………………………………………7

5.5 Connection Diagram ……………………………………………………………………………………………………8

5.6 Modbus interface RS485 …………………………………………………………………………………………………8

6. Commissioning ……………………………………………………………………………………………………………8

6.1 Operating the device …………………………………………………………………………………………………9

6.2 LED indication …………………………………………………………………………………………………………9

6.3 Input and output screens ………………………………………………………………………………………………9

7. Programming ………………………………………………………………………………………………………… 10

7.1 Programming via Front LCD & Two keys ………………………………………………………………………………… 10

7.1.1. Password Protection …………………………………………………………………………………………… 10

7.1.1.1 Password Veriﬁ cation …………………………………………………………………………………… 10

7.1.1.2 Editing Existing Password ………………………………………………………………………………… 11

7.1.2 Transducer Type Selection …………………………………………………………………………………… 12

7.1.3 System Type Selection ………………………………………………………………………………………… 12

7.1.4 Output Type Selection ………………………………………………………………………………………… 12

7.1.4.1 Output 1 Type Selection ………………………………………………………………………………… 12

7.1.4.2 Output 2 Type Selection ………………………………………………………………………………… 13

7.1.5 Potential Transformer Parameter Setting ………………………………………………………………………… 13

7.1.5.1 Potential Transformer primary value ……………………………………………………………………… 13

7.1.5.2 Potential Transformer Secondary Value …………………………………………………………………… 14

7.1.6 Current Transformer Parameter Setting ………………………………………………………………………… 15

7.1.6.1 Current Transformer Primary Value ………………………………………………………………………… 15

7.1.6.2 Current Transformer Secondary Value ……………………………………………………………………… 16

7.1.7 Communication Parameter Setting ……………………………………………………………………………… 17

7.1.7.1 Address Setting ………………………………………………………………………………………… 17

7.1.7.2 RS 485 Baud rate ……………………………………………………………………………………… 17

7.1.7.3 RS 485 Parity Selection ………………………………………………………………………………… 18

7.1.8 Input Characteristics Setting …………………………………………………………………………………… 18

7.1.8.1 End value of Input ……………………………………………………………………………………… 18

7.1.9 Output Characteristics Setting …………………………………………………………………………………… 21

7.1.9.1 Output 1 Characteristics Setting ………………………………………………………………………… 21

7.1.9.1.1 End value of output 1 ……………………………………………………………………………… 21

7.1.9.1.2 Start value of output 1 ……………………………………………………………………………… 22

7.1.9.1.3 Elbow value of output 1 ……………………………………………………………………………… 23

7.1.9.2 Output 2 Characteristics Setting ………………………………………………………………………… 24

7.1.9.2.1 End value of output 2 ……………………………………………………………………………… 24

7.1.9.2.2 Start value of output 2 ……………………………………………………………………………… 24

7.1.9.2.3 Elbow value of output 2 ……………………………………………………………………………… 25

7.1.10 Mode Selection ……………………………………………………………………………………………… 26

8. Phasor Diagram ………………………………………………………………………………………………………… 28

9. Programming via the programming connection and the PRKAB5000 programming cable ……………………………… 29

9.1. Programming via the RS485 (Modbus) interface ……………………………………………………………………… 29

9.2. DIP Switch Setting for Output ………………………………………………………………………………………… 29

Produktspezifikationen

Marke:	Camille Bauer
Kategorie:	niet gecategoriseerd
Modell:	SIRAX BT5400

Brauchst du Hilfe?

Wenn Sie Hilfe mit Camille Bauer SIRAX BT5400 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung niet gecategoriseerd Camille Bauer

Camille Bauer Sineax V624 Bedienungsanleitung

30 August 2024

Camille Bauer Sineax I552 Bedienungsanleitung

30 August 2024

Camille Bauer Sineax M561 Bedienungsanleitung

30 August 2024

Camille Bauer Sineax TI802 Bedienungsanleitung

30 August 2024

Camille Bauer Sineax I542 Bedienungsanleitung

30 August 2024

Camille Bauer Sineax VS30 Bedienungsanleitung

30 August 2024

Camille Bauer Sineax TI801 Bedienungsanleitung

30 August 2024

Camille Bauer Sineax U543 Bedienungsanleitung

30 August 2024

Camille Bauer Sineax V610 Bedienungsanleitung

30 August 2024

Camille Bauer Sineax I538 Bedienungsanleitung

30 August 2024

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung für -Kategorien-

Pioneer CA-R-PI.161 Bedienungsanleitung

19 September 2024

Pioneer CA-R-ISU.002AE Bedienungsanleitung

19 September 2024

Pioneer CA-R-VW.09PAE Bedienungsanleitung

19 September 2024

Exquisit KGC231-60-E-050CB Bedienungsanleitung

19 September 2024

Pioneer CA-R-PI.186 Bedienungsanleitung

19 September 2024

Kidde 900-0076 Bedienungsanleitung

19 September 2024

Pioneer CA-R-PO.001 Bedienungsanleitung

19 September 2024

Speco Technologies APCR620L Bedienungsanleitung

19 September 2024

Pioneer CA-R-MAN.001 Bedienungsanleitung

19 September 2024

Pioneer CA-R-IR.002 Bedienungsanleitung

19 September 2024