Bushnell Prime L20 Trail 119930M Bedienungsanleitung

Bushnell Nicht kategorisiert Prime L20 Trail 119930M

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Bushnell Prime L20 Trail 119930M (120 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/120
I N S T R U C T I O N M A N U A L
PRIME L20 TRAIL CAMERA
Model #119930M 07-21
ENGLISH
IMPORTANT NOTE
Congratulations on your purchase of one of the best trail
cameras on the market! Bushnell is very proud of this little
unit and we are sure you will be pleased with it as well. We
appreciate your business and want to earn your trust. Please
refer to the notes below and the instructions in this manual
to ensure that you are completely satisfied with this product.
If your Bushnell Prime L20 Trail Camera does not seem to be
functioning properly or if you are having photo/video quality
issues, please check the Troubleshooting/FAQ section.
Problems are often due to something simple that was
overlooked, or require only changing one setting to solve.
If your problem continues after trying the solutions in the
Troubleshooting/FAQ section, please call Bushnell Customer
Service at (800) 423-3537. In Canada, call (800) 361-5702.
For EU owners, email: contact@bushnell.eu
Bushnell recommends using 6 Energizer® Lithium AA batteries
in this Prime L20 Trail Camera model to obtain maximum
battery life.
Do not mix old and new batteries.
Do not mix battery types-use ALL lithium or ALL alkaline.
Rechargeable batteries are NOT recommended.
Bushnell recommends using SanDisk® SD and SDHC Cards
(up to 32GB capacity) in all Prime L20 Trail Cameras.
2
INTRODUCTION
About the Prime L20 Trail Camera
The Bushnell Prime L20 Trail Camera is a digital scouting camera. It
can be triggered by any movement of game in a location, detected by
a highly sensitive Passive Infra-Red (PIR) motion sensor, and then take
high quality pictures (up to 20MP still photos), or 720p HD video clips.
The Prime L20 Trail Camera consumes very little power (less than 0.08
mA) in a stand-by (surveillance) state. This means it can deliver up to
twelve months stand-by operation time when the device is powered
by six AA alkaline batteries. Once motion in the monitored area is
detected, the digital camera unit will be triggered at once (typically
less than half a second) and then automatically take images according
to previously programmed settings. The Prime L20 Trail Camera is
equipped with built-in infrared LEDs that function as a flash, so that it
delivers clear photos or videos (in black & white) even in the dark, and
it can take color photos or videos under sufficient daylight. The Prime
L20 Trail Camera is designed for outdoor use and is resistant against
water and snow.
Applications
The Prime L20 Trail Camera can be used as a trail camera for hunting
or scouting game. It is also suitable for surveillance usage.
PARTS AND CONTROLS
The Prime L20 Trail Camera provides the following connections for
external devices: USB port and SD card slot .(Fig. 4)
A 3-way power switch is used to select the main operating modes:
OFF, AIM, and ON .(Fig. 3)
A D-Pad interface with 5-way keys is primarily used in AIM mode
to select operational functions and parameters. As shown in Fig. 3,
these keys are: UP, DOWN, and OK. Two of the keys can also perform a
second function (shortcut operations in AIM mode) in addition to their
main function: The DOWN key can be used to set the camera to Photo
mode (still camera icon), and the UP key can set the camera to Video
mode (movie camera icon).
3


Produktspezifikationen

Marke: Bushnell
Kategorie: Nicht kategorisiert
Modell: Prime L20 Trail 119930M

Brauchst du Hilfe?

Wenn Sie Hilfe mit Bushnell Prime L20 Trail 119930M benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Bushnell

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-