Burley Cub 2004-2006 Bedienungsanleitung

Burley Diversen Cub 2004-2006

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Burley Cub 2004-2006 (24 Seiten) in der Kategorie Diversen. Dieser Bedienungsanleitung war fĂŒr 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/24
Cub
Owner’s Instruction & Safety Manual
Contents
Section Page
Introduction 2
I. Hardware Bag Contents & Tool List 3
II. Attaching the Wheels 3
III. Installing the Tongue & Safety Flag 4
IV. Unfolding & Folding your Burley Cub 6
V. Using the Seat Harness 9
VI. Padded Seat & Shoulder Harness 12
VII. Hitching the Burley Cub to Your Bicycle 13
VIII. Trailer Maintenance and Care 14
IX. Safety Guidelines 16
X. Safety Checklists 21
XI. Parts List & Drawing 22
Warranty 24
2
Burley Cub Owner’s Instruction and Safety Manual
Congratulations!
You’ve just pur chased a Burley¼ trailer, the lead ing choice of dis crim i nat ing bi cy cle
trailer own ers world wide. Every ef fort has been made to ensure your pur chase is of
top quality and proven design, ready to provide you with many years and thou sands
of miles of happy, safe trailering.
IMPORTANT: Because some of the features and guidelines for
using the Burley Cub merit close attention, it is very im por tant
that you fa mil iar ize yourself with the trailer by reading this
manual all the way through before use. If you have any ques-
tions, we encourage you to contact your Burley dealer.
Introduction
This manual is written sequentially to assist initial assembly. Your Burley Cub is
shipped 95% factory-as sem bled. You will need to mount the reïŹ‚ ectors, install the
tongue and brake, attach the wheels, side panels, roll bar and safety ïŹ‚ ag, and snap
the cover into place. Once you’ve read the safety guidelines, you’re ready to go. Initial
as sem bly should take 10-15 minutes. Sub se quent setting up and folding can eas i ly
be done in a couple of minutes, no tools re quired.
Before trailering, be sure you have a thor ough understanding of the safety harness
and of trailer hitch operation. Practice folding and un fold ing your trailer; it can easily
be done in less than a minute, no tools required. Check to see that the trailer wheels
and hitch are securely at tached. We again request that you read this manual from
start to ïŹ nish before use, referring to it as necessary in the future.
NOTE: Any reference to left or right is made in the direction of
travel, as if you were sitting in the child seat looking forward.
When Loaning or Selling Your Trailer
If you loan or sell your Burley Cub, supply the new user with this manual. They must
familiarize them selves with all sec tions—especially sections “IX. Safety Guidelines”
and “X. Safety Check lists” prior to use. It is es sen tial that they understand the differ-
ences between riding a bicycle with a trailer and without one. It is also essential that
they understand correct wheel at tach ment, setup, folding, and use of the har ness,
safety ïŹ‚ ag, cover, and hitch. Always ensure that both adult and child are wear ing
helmets. Never loan your trailer if it is in need of maintenance or repair.
3
Burley Cub Owner’s Instruction and Safety Manual
I. Hardware Bag Contents and Tool List
IMPORTANT: Please verify that you have received all of the
con tents listed. Do not pro ceed with as sem bly if any parts are
missing; contact Bur ley im me di ate ly for replacement parts.
Hardware Bag Contents
(1) Cub Brake Assembly (1) Brake Hardware Bag
(3) #10 x 5/8 Philips pan bolts (3) #10 split washers
(3) #10 x 1” fender washers (1) 4 x 6 plastic bag
(1) 6 x 18 plastic bag
II. Attaching the Wheels
First, verify that the tires are inïŹ‚ ated to 30-35 P.S.I. Next, tip the trailer frame on its
back end. If you are working on a rough or dirty surface, lay down a cloth or other
protective barrier to avoid damage to your trailer. With the quick-release lever in the
“OPEN” position, insert the wheel axle assembly COMPLETELY INTO THE HOLLOW
TRAILER AXLE, MAKING SURE THAT THE HORIZONTAL SHAFT GOES ALL THE WAY
INTO THE AXLE.
Quick-release
lever in unlocked
“open” position
Quick-release
lever in locked
“closed” position Wheel axle assembly inserts
into hollow trailer axle
Tool List
7/16” wrench Torque wrench Extension
7/16” socket Two no. 2 Phillips screwdrivers
1/4” pin punch and hammer, or 1/4” drill bit and hand drill (see page 8)

Produktspezifikationen

Marke: Burley
Kategorie: Diversen
Modell: Cub 2004-2006

Brauchst du Hilfe?

Wenn Sie Hilfe mit Burley Cub 2004-2006 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Diversen Burley

Burley

Burley Bee 2004-2006 Bedienungsanleitung

27 August 2024
Burley

Burley D-Lite 2016 Bedienungsanleitung

27 August 2024
Burley

Burley Flatbed 2014 Bedienungsanleitung

27 August 2024
Burley

Burley D-Lite 2014 Bedienungsanleitung

27 August 2024
Burley

Burley Flatbed 2007 Bedienungsanleitung

27 August 2024
Burley

Burley Solo 2010-2013 Bedienungsanleitung

27 August 2024
Burley

Burley Honey Bee 2013 Bedienungsanleitung

27 August 2024
Burley

Burley Cub 2013 Bedienungsanleitung

27 August 2024
Burley

Burley Kazoo 2015 Bedienungsanleitung

27 August 2024
Burley

Burley Solo 1995-2003 Bedienungsanleitung

27 August 2024

Bedienungsanleitung Diversen

Neueste Bedienungsanleitung fĂŒr -Kategorien-

ION

ION ICADE Bedienungsanleitung

16 Oktober 2024
Walkera

Walkera Goggle 3 Bedienungsanleitung

16 Oktober 2024
Walkera

Walkera Goggle 4 Bedienungsanleitung

16 Oktober 2024
Kerbl

Kerbl 81685 Cat flap Bedienungsanleitung

6 Oktober 2024
Tanita

Tanita HC-212F Breath Checker Bedienungsanleitung

6 Oktober 2024
Somfy

Somfy Telis Lounge Bedienungsanleitung

5 Oktober 2024
Navman

Navman NavBus Bedienungsanleitung

5 Oktober 2024
Trelock

Trelock LS 320 Bedienungsanleitung

5 Oktober 2024
Bobike

Bobike Maxi City Bedienungsanleitung

5 Oktober 2024
Tanita

Tanita 1210N Bedienungsanleitung

5 Oktober 2024