Burg Wächter PointSafe P 2 E FS Bedienungsanleitung

Burg Wächter Sicher PointSafe P 2 E FS

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Burg Wächter PointSafe P 2 E FS (4 Seiten) in der Kategorie Sicher. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

www.burg.biz

BURG-WÄCHTER KG

Altenhofer Weg 15

58300 Wetter

Germany

PointSafe FS

en User Manual

BA PointSafe FS dp 02/2015

PointSafe FS English 2 |

Structure Dear customer,

Thank you for buying a PointSafe FP. This safe was developed and manu-

factured by Burg-Wächter using the latest ﬁngerprint sensor technology.

This Fingerprint (FP) PointSafe has been designed to be used in both

standard and hotel modes. In addition to the keypad and Fingerprint reader,

this safe comes with mechanical emergency override key.

Important: Please read the entire User Manual before

you start programming.

We hope you enjoy your new Fingerprint safe.BURG-WÄCHTER

Important Notes

– Store your codes and emergency Override key at a secure location

and Not inside the safe (the emergency lock is located under

the 4 batteries).

– For security reasons we recommend you do use personal numbers Not

for example D. O. B and Telephone numbers as your User or Master code.

– If the safe is not going to be used for a prolonged period of time,

please remove the batteries.

– For hotel mode: See “ ” and the attachedPointSafe FP in hotel mode

guest code instructions.

– For security reasons, Both the user and administrator codes should

be changed from there factory settings.

– This Fingerprint Pointsafe will only reach its required security level

if correctly bolt ﬁxed to a secure wall or ﬂoor.

(Please use the provided anchoring bolts)

– For security reasons, the user code should be different from

the Master code.

– Please contact your vendor if you have any questions or problems

regarding your PointSafe FS.

General

This PointSafe FP can be operated in both standard mode and hotel mode.

Standard mode: The safe can be operated by using a Master code,

User code and up to ﬁngerprints.5

Hotel mode: The safe can be operated by using a Master code,

User code and ﬁngerprint.1

The Master code must have 8 digits.

The user code can have between 3 and 6 digits.

Master Code: 12345678 (factory set)

User Code: 168 (factory set)

When an action has been successfully completed, the green “opening

readiness” LED goes on. The red “Denied entry / Blocking time” LED indicates

that the action failed. In such case the original settings are retained.

Illustrations

Close / Clear button

Control of the locking mechanism for automated closing of the bolts.

On / Enter button

Green “Ready” LED

When a valid opening code is entered and programming is successful,

the LED goes on.

Battery replacement symbol

When this LED is on, please replace batteriesall 4

(LR6 / AA / 1.5V / Alkaline).

Entry / Programming LED

When PointSafe is in programming mode, the LED goes on.

When the programming mode is terminated LED goes out.

Denied entry / Blocking time

The LED is on when an invalid code is entered or programming is

incorrect. When a incorrect code is entered three times in a row,

the operation of the safe will be blocked for 5 minutes. The LED will

ﬂash during this time and code entry or ﬁngerprint will not work

during this time.

Technical Data

Blocking times After 3 wrong code entries for 5 minutes

Power supply 4 x MIGNON LR6 / AA / ALKALINE

Working

temperature

conditions

-15 °C to + 50 °C

up to 95 % rel. air humidity (noncondensing)

Signal Tones

1 x During opening or closing

2 x Fingerprint sensor defective or a contact problem

3 x No guest code stored in hotel mode

8 x Motor or bolt mechanism blocked

Setting up PointSafe

– Remove the screw from the battery compartment side

– Shift the front panel cover cap with the PointSafe logo down

– Insert the batteries (4 pieces, LR6 / AA / 1.5V / Alkaline)

– The electronics will need approx. 30 sec. to load the program.

Then press the “Enter” button

– Enter the user code (168)

– Press the “Enter” button again

Now the safe can be opened and individually programmed

Standard Mode

Opening with Master code

– Press “On / Enter”, then enter the Master code.

The door automatically opens.

Opening with User code

– Press “On / Enter”, then enter the User code.

The door automatically opens.

Open with ﬁnger

– Press “On / Enter”, then move your stored ﬁnger over the sensor.

The door automatically opens.

– Press the “Close / Clear” button.

Produktspezifikationen

Marke:	Burg Wächter
Kategorie:	Sicher
Modell:	PointSafe P 2 E FS
Breite:	350 mm
Tiefe:	300 mm
Gewicht:	14000 g
Produktfarbe:	Schwarz
Akku-/Batterietyp:	AA
Höhe:	255 mm
Energiequelle:	Akku
Material:	Metall
Befestigungstyp:	Boden / Wand
Sperren:	Ja
Eingebautes Display:	Ja
Zertifizierung:	CE
Typ:	Frei stehend sicher
Betriebsanleitung:	Ja
Innenkapazität:	20.5 l
Montageset:	Ja
Anzahl:	1
Anzahl unterstützter Akkus/Batterien:	4
Innenmaße (B x T x H):	343 x 241 x 248 mm
Einstellbare Regale:	Ja
Anzahl der Regale:	1 Regale
Beste Verwendung:	Document, Jewelry, Money
Schloss Art:	Combination lock, Fingerprint reader