Brother P-Touch Edge PT-E110 Bedienungsanleitung

Brother Etikettendrucker P-Touch Edge PT-E110

Lesen Sie kostenlos die πŸ“– deutsche Bedienungsanleitung fΓΌr Brother P-Touch Edge PT-E110 (17 Seiten) in der Kategorie Etikettendrucker. Dieser Bedienungsanleitung war fΓΌr 19 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/17
ELECTRONIC LABELING SYSTEM
(QJOLVK
ξ˜ƒ8VHUΒ·Vξ˜‡*XLGH
E11
0
ELECTRONIC LABELING SYSTEM
GETTING STARTED
Installing Power Supply and Tape Cassette
With the LCD facing down, open the Cassette
Cover by pressing the grooved tab and
pushing in the direction of the arrow, as
illustrated.
When replacing batteries or tape cassettes,
make sure the power is turned off.
This P-touch labeling system requires six (6)
AAA alkaline batteries or six (6) fully-charged
Ni-MH batteries, not included.
1
Print Head
Tape Cutter LeverCassette Cover
1 2
Thank you for purchasing a Brother P-touch labeling system!
Use your new Brother P-touch labeling system to create a wide variety of custom, self-adhesive labels.
This P-touch labeling system uses Brother TZe or HGe tapes. TZe and HGe tape cassettes are available in many color and sizes. For
a complete list of tapes compatible with your P-touch labeling system, visit us at: www.brother.com.
Please read this guide, and the included Product Safety Guide, before using this P-touch labeling system. After reading this guide, keep
it in a safe place.
D01240001
(QJOLVK
ξ˜ƒ8VHUΒ·Vξ˜‡*XLGH
E11
0
Insert the Tape Cassette following the
drawing marked inside the case. Gently
press the Cassette into the P-touch labeling
system until it clicks into place.
ξ˜‚ &ξ˜Žξ˜œξ˜…ξ˜†ξ˜–ξ˜‹ξ˜”ξ˜…ξ˜†ξ˜’ξ˜Šξ˜‹ξ˜”ξ˜†ξ˜ƒξ˜Žξ˜“ξ˜…ξ˜†'ξ˜Žξ˜–ξ˜–ξ˜…ξ˜‰ξ˜‰ξ˜…ξ˜†ξ˜ξ˜–ξ˜†ξ˜ξ˜Žξ˜”ξ˜œξ˜…ξ˜˜ξ˜† ξ˜†ξ˜Šξ˜”ξ˜† ξ˜—
ξ˜‚ ;ξ˜–ξ˜…ξ˜†ξ˜Šξ˜‘ξ˜ξ˜’ξ˜†<ξ˜”ξ˜Šξ˜‰ξ˜„ξ˜…ξ˜”ξ˜†ξ˜ƒ=ξ˜…ξ˜†ξ˜Šξ˜”ξ˜†>?ξ˜…ξ˜†ξ˜‰ξ˜Žξ˜“ξ˜…ξ˜–ξ˜†!ξ˜ξ˜‰ξ˜„ξ˜†ξ˜‰ξ˜„ξ˜ξ˜–ξ˜†
machine.
Close the Cassette Cover and gently press
until it clicks into place.
NOTE
If you prefer to use the optional AC Adapter instead
of using batteries:
1.
Insert the Power Adapter cord into the AC Adapter
Jack on the side of the P-touch labeling system.
2.
Insert the Power Adapter into a grounded
AC electrical outlet.
Tape Exit Slot
Toothed Wheel
Cutter Edge
End of Tape
Tape Guides
3
AC Adapter Jack
4


Produktspezifikationen

Marke: Brother
Kategorie: Etikettendrucker
Modell: P-Touch Edge PT-E110

Brauchst du Hilfe?

Wenn Sie Hilfe mit Brother P-Touch Edge PT-E110 benΓΆtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Etikettendrucker Brother

Bedienungsanleitung Etikettendrucker

Neueste Bedienungsanleitung fΓΌr -Kategorien-