Bron-Coucke 202100 Bedienungsanleitung
Bron-Coucke
Schneidemaschine
202100
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Bron-Coucke 202100 (2 Seiten) in der Kategorie Schneidemaschine. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
202100 ma en 2017.09
*202.100 MANDOLINE - MANUAL
1/6
CHEF’S MANDOLINE INSTRUCTIONS (TO BE READ CAREFULLY)
The CHEF’S MANDOLINE, thanks to its wonderful blade quality, is able to cut a great variety of shapes,
such as chips, “vichy carrots”, souffle potatoes, gratins, vegetable rings, onion rings or slices, matchstick
potatoes, “allumettes”, julienne, lacecut potatoes, among others. The CHEF’S MANDOLINE consists of:
• A rigid frame with 2 handles and a non-skid (8) reversible stand.
• A bearing plate adjustable in depth with the lever provided.
• A smooth blade (2) adjustable with a knurled know (3).
• Four removable “comb” Cutting block units with respectively 2, 4, 7 and 10 mm spaces between the
multiple blades (4).
• A guard (safety device) (7).
IMPORTANT:
Do not attempt to use the CHEF’S MANDOLINE until you have studied these instructions carefully.
Failure to do so may result in damage to the various cutting edges.
BEFORE FIRST USE:
Before using for the first time, it is recommended to wash the mandoline in hot water.
INSTRUCTIONS:
Before use, be sure that the smooth blade’s cutting edge is firmly held under the 2 lugs on each side of the
mandoline.
TO INSTALL THE CUTTING BLOCK UNIT (4)
at the rear of the mandoline, it’s advisable to unscrew half turn the knurled knob, to move back the smooth
blade at the most (opposite the wavy blade) and then to solidly screw back again the knurled knob.
Place the unit blade cutting pointing side by side the 2 crosses (1 cross on the block and 1 cross on the
support slide) and sit this unit on the 2 lugs located on the 2 edges of the mandoline.
Fold-back the small “holding tongue” (5).
REMOVAL OF AN UNIT BLADE CUTTING
Slide back the small “holding tongue” (5) to uncover completely the “comb” Cutting block unit (4).
Then you can remove the “comb” cutting unit. Store the “comb” cutting units in the storage box delivered
with the mandoline. In this way, the blades will not be damaged.
HOW TO MAKE STRAIGHT AND WAVY SLIECES
Make sure that the stand (8) of the mandoline is completely unfolded and in a stable position on the work
surface. Remove the “comb” cutting unit if one is mounted in the mandoline. Take off the unit blade cutting if
equipped. Unscrew half turn the knurled knob and bring forward the straigh blade closer to the wavy blade,
then highly screw back again the knurled knob. Adjust the thickness of the cut thanks to the lever (6) located
at the rear of the mandoline. Now you can slice your vegetables, always using the guard (7) to hold and
push your vegetables towards the blade.
HOW TO CUT INTO STICKS:
Install the unit blade cutting (see above explanations), adjust the thickness of the cut thanks to the lever (6).
Now you can cut the vegetables always using the guard (7). The dimensions of the sticks or “batonnets”
that you cut are generated by, on the one hand the choice of dimension of the “comb” cutting block unit
(2, 4, 7 or 10 mm intervals), and on the other by the height of the slice that you take (adjustment of the
bearing plate.)
HOW TO MAKE GAUFRETTES:
Remove the “comb“ cutting unit if one is mounted in the mandoline. Move the smooth blade (2) as close as
possible to the bearing plate (1) and block it by tightening the knurled knob (3). The gaufrettes are cut on the
waffled blade. Adjust the thickness of the cut to about 2 mm with the lever (6). Slice your vegetable using the
guard then turn the guard (about 1/4 of a rotation) and slice again and so on. Turn the guard at each slice.
Adjust the thickness of the cut to obtain perfect holes in the slices: thicker if the slice falls to bits and thinner if
the holes are not properly shaped.
202100 ma en 2017.09
*202.100 MANDOLINE - MANUAL
2/6
THE GUARD:
ALWAYS USE THE GUARD (7) FOR ALL CUTTING OPERATIONS IN ORDER
TO AVOID ALL RISK OF INJURY!
The guard is equipped with stainless steel nails so that it can hold properly the vegetable pieces during
the cutting operation. There is also a space hollowed out in the guard allowing the guard to hold long
vegetables (zucchini for example). In this case, cut with the guard in the direction of the arrows molded into
the underside of the guard. Please note that this guard has a mobile central part (9) which sits proud of the
rest of the guard when the stainless steel nails are pushed on to the vegetable to be sliced.
When cutting you should press with a certain pressure on this mobile central part with the palm of the hand
in order to push the vegetable down towards the cutter blade during the successive cutting operations.
One again, we advis to use the guard for all cutting operations.
MAINTENANCE :
The CHEF’S MANDOLINE is designed to require only minimal maintenance. From time to time one should
resharpen the smooth Cutting block, using a fine hone or stone. Always store the “comb” cutting units in their
box, thus keeping their edges protected while not in use. For storage, give the Mandoline its own place,
often one chooses to hang the Mandoline in the kitchen by one of its handles.
The guard can also be hung, if you choose to do so.
CLEANING:
Before using for the first time, it is recommended to wash the Mandoline in hot water. Cleaning is particularly
easy. We recommend to remove the smooth blade and any “comb” cutting block unit from the frame
(in order to avoid any risk of user injury) First and to wash each part in hot water or hot water with soap
separately. Rinse and dry. The frame without the blades is washable in the dishwasher.
Now that you have read these instructions you are ready to try out your CHEF’S MANDOLINE.
You will see that you can do many things with this wonderful tool.
It will give you the inspiration to try out many new recipes and ideas!
Produktspezifikationen
| Marke: | Bron-Coucke |
| Kategorie: | Schneidemaschine |
| Modell: | 202100 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Bron-Coucke 202100 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schneidemaschine Bron-Coucke
22 August 2024
22 August 2024
Bedienungsanleitung Schneidemaschine
- Schneidemaschine Clatronic
- Schneidemaschine Domo
- Schneidemaschine G3 Ferrari
- Schneidemaschine Coline
- Schneidemaschine Ernesto
- Schneidemaschine Tristar
- Schneidemaschine Genius
- Schneidemaschine SilverCrest
- Schneidemaschine Sunbeam
- Schneidemaschine Clas Ohlson
- Schneidemaschine Quigg
- Schneidemaschine Makita
- Schneidemaschine Beper
- Schneidemaschine Bestron
- Schneidemaschine Camry
- Schneidemaschine Princess
- Schneidemaschine Royal Catering
- Schneidemaschine Trisa
- Schneidemaschine Bosch
- Schneidemaschine Parkside
- Schneidemaschine Ambiano
- Schneidemaschine Arendo
- Schneidemaschine Siemens
- Schneidemaschine Bifinett
- Schneidemaschine Electrolux
- Schneidemaschine Fagor
- Schneidemaschine Gorenje
- Schneidemaschine Jata
- Schneidemaschine Proficook
- Schneidemaschine Rommelsbacher
- Schneidemaschine Sammic
- Schneidemaschine Severin
- Schneidemaschine Unold
- Schneidemaschine Bomann
- Schneidemaschine Gastroback
- Schneidemaschine H.Koenig
- Schneidemaschine Hendi
- Schneidemaschine Korona
- Schneidemaschine Melissa
- Schneidemaschine Russell Hobbs
- Schneidemaschine Switch On
- Schneidemaschine Tefal
- Schneidemaschine Vox
- Schneidemaschine Powerfix
- Schneidemaschine ADE
- Schneidemaschine ECG
- Schneidemaschine Black And Decker
- Schneidemaschine Skil
- Schneidemaschine Blaupunkt
- Schneidemaschine Cuisinart
- Schneidemaschine Eldom
- Schneidemaschine Eta
- Schneidemaschine Fritel
- Schneidemaschine Graef
- Schneidemaschine Heinner
- Schneidemaschine Kenwood
- Schneidemaschine Krups
- Schneidemaschine Trebs
- Schneidemaschine Wilfa
- Schneidemaschine Festool
- Schneidemaschine Exquisit
- Schneidemaschine Bartscher
- Schneidemaschine MACH
- Schneidemaschine Philco
- Schneidemaschine Hikoki
- Schneidemaschine Hyundai
- Schneidemaschine Magimix
- Schneidemaschine Livoo
- Schneidemaschine Kinzo
- Schneidemaschine Perel
- Schneidemaschine Beem
- Schneidemaschine Mia
- Schneidemaschine Ritter
- Schneidemaschine Sencor
- Schneidemaschine Turmix
- Schneidemaschine Ariete
- Schneidemaschine Efbe-Schott
- Schneidemaschine Kalorik
- Schneidemaschine Rotel
- Schneidemaschine Saro
- Schneidemaschine Ufesa
- Schneidemaschine Dremel
- Schneidemaschine Westfalia
- Schneidemaschine De Buyer
- Schneidemaschine ICES
- Schneidemaschine Brother
- Schneidemaschine MPM
- Schneidemaschine Team
- Schneidemaschine Venga
- Schneidemaschine JAC
- Schneidemaschine Wabäma
- Schneidemaschine Brandson
- Schneidemaschine JML
- Schneidemaschine Waves
- Schneidemaschine Zelmer
- Schneidemaschine Esperanza
- Schneidemaschine Kogan
- Schneidemaschine Rösle
- Schneidemaschine Tescoma
- Schneidemaschine Powerplus
- Schneidemaschine FAC
- Schneidemaschine RGV
- Schneidemaschine Presto
- Schneidemaschine Ozito
- Schneidemaschine Gourmetmaxx
- Schneidemaschine Swan
- Schneidemaschine Orbegozo
- Schneidemaschine CaterChef
- Schneidemaschine Ridgid
- Schneidemaschine Hobart
- Schneidemaschine Domoclip
- Schneidemaschine Emga
- Schneidemaschine Enkho
- Schneidemaschine Gastronoma
- Schneidemaschine Magic Chef
- Schneidemaschine Oster
- Schneidemaschine OXO
- Schneidemaschine PowerTec Kitchen
- Schneidemaschine Thane
- Schneidemaschine Zgonc
- Schneidemaschine Louis Tellier
- Schneidemaschine Avantco
- Schneidemaschine Nevir
- Schneidemaschine Wolfcraft
- Schneidemaschine Globe
- Schneidemaschine Berkel
- Schneidemaschine Nesco
- Schneidemaschine Nutrichef
- Schneidemaschine Kleva
- Schneidemaschine GARDE
- Schneidemaschine Cigweld
- Schneidemaschine Riviera & Bar
- Schneidemaschine Backyard Pro Butcher Series
- Schneidemaschine Pro-Cut
- Schneidemaschine Jokari
- Schneidemaschine Makeblock
- Schneidemaschine Boska
- Schneidemaschine Khind
- Schneidemaschine Weston
- Schneidemaschine Maruyama
- Schneidemaschine Baker's Mark
- Schneidemaschine Bifinet
- Schneidemaschine Prince Castle
- Schneidemaschine Borner
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
Princess Classic Multi Food Slicer 492977 Bedienungsanleitung
10 Oktober 2024
9 Oktober 2024
6 Oktober 2024
5 Oktober 2024
4 Oktober 2024
29 September 2024