Britax Kidfix SL SICT Bedienungsanleitung

Britax Autositz Kidfix SL SICT

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Britax Kidfix SL SICT (4 Seiten) in der Kategorie Autositz. Dieser Bedienungsanleitung war für 25 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

01 02

15 to 36 kg

(~4 to 12 years of age)

User instructions

SICT Fastening points

ISOFIT Locking arms

SICT Release button

SICT (only KIDFIX SL SICT)

ISOFIX insertion aids

ISOFIX fastening points (vehicle)

Belt guide (bright red)

Headrest

Seat cushion

Belt holder

ISOFIT Locking button

Compartment for user manual

ISOFIT Adjustment button

Adjustment belt

Backrest

Headrest adjustment handle

www.britax.eu

2000010049 15/04

KIDFIX SL

KIDFIX SL SICT

2. INTRODUCTION

Thank you for choosing

KIDFIX SL / KIDFIX SL SICT

to keep your child safe

through a new stage of their life.

In order to protect your child correctly, the

KIDFIX SL / KIDFIX SL SICT

must always be used and installed as described in these instructions.

If you have any further questions regarding its use, please feel free to contact

us:

BRITAX RÖMER

Kindersicherheit GmbH

Blaubeurer Straße 71

D-89077 Ulm

Germany

T.: +49 (0) 731 9345-199/-299

F.: +49 (0) 731 9345-210

E.: service.de@britax.com

www.britax.eu

BRITAX EXCELSIOR

LIMITED

1 Churchill Way West

Andover

Hampshire SP10 3UW

United Kingdom

T.: +44 (0) 1264 333343

F.: +44 (0) 1264 334146

E.:

service.uk@britax.com

www.britax.eu

These instructions use the following symbols stated below:

Symbol Keyword Explanation

DANGER! Risk of severe personal injury

WARNING! Risk of minor personal injury

CAUTION! Risk of material damage

TIP: Useful notes

Instructions that follow a set sequence are numbered.

Example:

1. Press the button...

Belt guide colours

For better differentiation, the two vehicle seat

belts are highlighted in different colours. The di-

agonal seat belt 18 in dark red and the lap belt

17 in bright red. The colour of the belt guides

on the child safety seat follows the same colour

scheme.

4. USE IN THE VEHICLE

Please observe the instructions for using children's restraining systems in the operating

instructions of your vehicle. ISOFIX anchoring systems The seat can be used in vehicles with

(see type list) and in vehicles with a 3-point belt.

3 ¿lease nd the information on the seats approved for child safety seats of the weight classes 15

to 36 kg in the operating instructions of your vehicle.

The KIDFIX SL / KIDFIX SL SICT is approved for two different methods of installation:

Symbol Installation type Approval type Section

with the ISOFIT locking arms into the

ISOFIX fastening points in the vehi-

cle. Check the list of vehicle types.

semi-univer-

sal

with the vehicle's 3-point seatbelt universal 9B

This means that the child safety seat may only be used in vehicles that are listed in the

vehicle type list enclosed. This type list is consistently kept up to date. The latest version

can be obtained from us or from www.britax.eu / www.roemer.eu.

You can use your child safety seat as follows:

In the direction of travel Yes

Against the direction of travel no 1)

with 2-point belt no

with 3-point belt2) Yes

with ISOFIX fastening points

(between seat surface and

backrest)

Yes

on front passenger seat Yes 3)

on outer rear seat Yes

on centre rear seat (with

3-point belt) Yes 4)

1) Use is permitted on a rearward-facing vehicle seat (e.g. in a van or minibus) only if the

vehicle seat is also approved for use by adults. The seat may not be in the area of effect of

an airbag.

2) The safety belt must be approved to ECE R 16 or a comparable standard (see test label on

belt with an "E" or "e" in a circle).

3) If there is a front airbag: Slide the vehicle seat a long way back and refer to any instructions

in vehicle owner's manual.

4) Cannot be used if the vehicle seat is equipped with only a 2-point belt.

15–36 kg

3. Certification

BRITAX RÖMER

Child safety seat

Testing and certi¿cation

In accordance with ECE* R 44/04

Group Body weight

KIDFIX SL

KIDFIX SL SICT

II+III 15 to 36 kg

*ECE = European Standard for Child Safety Equipment

The child safety seat has been designed, tested and certi ed according ¿

to the requirements of the European Standard for Child Safety Equipment

(ECE R 44/04). The seal of approval E (in a circle) and the approval number

are located on the orange approval label (sticker on the child safety seat).

DANGER! This approval will be invalidated if you make any modi¿ca-

tions to the child safety seat. Only the manufacturer is permit-

ted to make modi¿cations to the child safety seat.

WARNING! Use the

KIDFIX SL / KIDFIX SL SICT

exclusively for secur-

ing your child in your vehicle. It is in no way suitable as a

seat or toy in the home.

DANGER! Never secure your child or the child safety seat with a 2-point

belt. If you secure your child in the child seat with only a

2-point belt, then in the event of an accident this may cause

serious injuries to your child, possibly resulting in death.

PAGE I

6. DISASSEMBLY AND DISPOSAL

1. PRODUCT OVERVIEW

1. Operate the release button of your vehicle seat

buckle.

2. Pull out the diagonal belt from the dark red belt hold-

er 09 on the headrest 14

Only for installation type A (ISOFIT):

3. Press the red ISOFIT locking button to release the

ISOFIT fastening 08 and pull out the ISOFIT locking

arm 07. Repeat the procedure with the other ISOFIT

locking arm 07 .

4. Pull on the adjustment belt 12 until both ISOFIT

locking arms 07 are in the storage position.

ŹThe child safety seat can now be removed.

DANGER! the child safety seat must always be

secured when it is in the vehicle, even if no child is

being transported.

DISPOSAL:

Please observe the waste disposal regulations in your country.

Disposal of packaging Container for cardboard boxes

Seat cover Residual waste, thermal utilisation

Plastic parts According to the labelling in the corre-

sponding container

Metal parts Container for metals

Belt straps Container for polyester

buckle and tongue Residual waste

REMOVAL:

UNFASTENING YOUR CHILD:

1. To unfasten your child, use the release button of your vehicle seat buckle.

Removing the seat cover

1. Moving the headrest of the vehicle seat into the top

position.

2. Unhook the cover hooks 20 on the rear of the back-

rest 16 .

Remove the upper part of the cover.

4. Unhook the cover loops 21 at the bottom on the rear

of the backrest 16

5. Pull off the cover from the seat cushion 10 .

Removing the headrest cover

Unhook the cover loops

on the back of the head-

rest

7. Unhook the cover hooks 20 on the front of the back-

rest16

Pull off the cover of the headrest

ŹThe cover can now be washed.

Please observe the

instructions on the washing label of the cover:

Re-¿tting the cover

Proceed in reverse order to put on the cover.

5. CARE AND MAINTENANCE

Please ensure that you only use the original BRITAX RÖMER replacement seat

covers, as the seat cover is an integral part of the child safety seat and ful¿ls

important functions to ensure the smooth operation of the system. Replacement

seat covers are available from your dealer or from an ADAC of¿ce.

 The cover can be removed and washed with a mild detergent in the delicates

programme of the washing machine (30 °C). Please observe the instructions

on the washing label of the cover.

 The plastic parts can be cleaned using soapy water. Do not use any caustic

cleaning agents (such as solvents).

DANGER! The child seat must not be used without the seat cover.

To release the SICT, 03 press the SICT release button 04

and remove the SICT 03 .

150415_KIDFIX_SL_KIDFIX_SL_SICT_GB.indd 1 15.04.2015 08:23:30

7. SAFETY NOTES

Please take the time to read these instructions carefully and keep

them to hand in the intended storage compartment 13 on the child

safety seat at all times! The instructions must be with the child safety

seat if the latter is passed on to a third party.

DANGER! For the protection of your child:

 In the event of an accident with a collision speed of more than 10 km/h,

the child safety seat may be damaged without the damage becoming

immediately visible. In this case the child safety seat must be replaced.

Please dispose of it properly.

 As a rule, have your child safety seat checked if it was damaged (e.g if it

falls on the ground).

 Regularly check all important parts for damage. Ensure that all mechanical

parts, in particular, are fully functional.

 Never lubricate or oil parts of the child seat.



Never leave your child unattended in the child seat in the vehicle.

 Only allow your child to enter and exit the vehicle on the pavement side.

 Protect the child safety seat from intensive direct sunlight when it is not in

use. The child safety seat can get very hot in direct sunshine. Child skin is

sensitive and could thereby be harmed.



The more snugly the belt ¿ts over your child's body, the better they will be pro-

tected. Therefore avoid putting thick clothes on your child under the belt.

 Take regular breaks on long journeys in order to give your child the oppor-

tunity to play around.

 Use on the rear seat: Move the front seat forward far enough that you

child's feet cannot hit the backrest of the front seat (to prevent risk of

injury).

DANGER! For the protection of all vehicle occupants:

In the case of an emergency stop or an accident, unsecured persons or

objects may cause injury to other vehicle occupants. Please always check

that...

 the backrests of the vehicle seats are locked (i.e. that any foldable rear

seat bench latch is engaged).

 all heavy or sharp-edged objects in the vehicle (e.g. on the parcel shelf)

are secured.

 all persons in the vehicle have their seatbelts fastened.

 the child safety seat is always secured when it is in the vehicle, even if no

child is being transported.

WARNING! For your protection when handling the child seat:

 Never use the child safety seat free-standing, not even for test sitting.

 :hen swivelling up the backrest 16 , nothing must come between the

backrest 16 and the seat cushion 10 . You or your child could pinch your

¿ngers, injuring them.



To avoid damage, ensure that the child safety seat is not jammed in between

hard objects (car door, seat rails, etc.).



Keep the child safety seat in a safe place when it is not in use. Do not place

any heavy objects on the seat and do not store it directly next to sources of

heat or in direct sunlight.

CAUTION! To protect your vehicle:



Certain car seat covers made from more sensitive materials (e.g. velour, leath-

er, etc.) may sustain signs of wear and tear when using child safety seats. For

optimum protection of your car seat covers, we recommend using the BRITAX

RÖMER car seat protector from our range of accessories.

PAGE II

A correctly set headrest 14 ensures that the diagonal seat belt section 18 is

optimally positioned, and gives your child optimum protection.

The headrest 14 must be adjusted so that there is a space two ¿ngers wide

between the headrest 14 and your child's shoulders.

To adM ¿ust the height of the headrest to t your

child:

1. Grip the adjustment handle 15 on the back of the

headrest 14 and pull it upwards.

This unlocks the headrest.

2. You can now move the unlocked headrest 14 to

the desired height. As soon as you release the

adjustment handle 15 , the headrest 14 will lock

into place.

3. Place the child safety seat on the vehicle seat.

4. Have your child sit down in the child safety seat and

check the height. Repeat the procedure until the

headrest 14 has the correct height.

8. ADJUSTING THE HEADREST &

SECURING THE SICT

9. INSTALLATION

With ISOFIT + 3-point belt

10. SECURING YOUR CHILD

With 3-point belt

7. Push both ISOFIT locking arms 07 into the insertion

aids 02 until the ISOFIT locking arm 07 engages

with a clicking sound.

DANGER! Check that the ISOFIT locking arm is

correctly engaged 07 by pulling on it.

9. Press the red ISOFIT locking button

to ensure

that the hook on the ISOFIT locking arm

is open

and ready for use.

10. Push both ISOFIT locking arms 07 into the

insertion aids 02 until the ISOFIT locking arm 07

engages with a clicking sound.

DANGER! Check that the ISOFIT locking arm is

correctly engaged 07 by pulling on it.

11. Pull on the adjustment belt 12 and push the

child seat backwards at the same time, until the

die backrest 16 is ush with the backrest of the À

vehicle seat.

12. Give the child safety seat a ¿rm pull forwards to

ensure that it is securely fastened and check the

ISOFIT locking arms again 07 to ensure that both

are fully locked in place.

13. Carry out the steps in Section 10 „SECURING

YOUR CHILD“.

For the safety of your child, before every journey in the car check

that...

Źthe child safety seat is slotted in on both sides with the ISOFIT locking

arms 07 in the ISOFIT fastening points 01 ;

Ź the child safety seat is securely fastened;

Źthe lap belt 17 runs in the bright red belt guides on both sides of the seat

cushion 06 ,

Źthe diagonal seat belt section 18 on the side of the vehicle seatbelt buck-

le 19 also runs through the light red belt guide 06 of the seat cushion,

Źthe diagonal seat belt section 18 runs through the dark red belt holder 09

of the headrest,

Źthe SICT 03 isinstalled and used correctly,

Źthe diagonal seat belt section 18 runs diagonally backward,

Źthe straps are tight and not twisted,

ŹThe seatbelt buckle 19 must not be positioned on the red belt guide 06 in

the seat cushion.

DANGER! If your child tries to open

the red ISOFIT safety button

or the vehicle belt buckle

, stop the vehicle as soon as safely possible.

Check whether the child safety seat is correctly fastened and ensure that

your child is correctly secured. Explain to your child the dangers associated

with his actions.

1. If your vehicle is not tted with ISOFIX insertion aids as standard, clamp ¿

the two insertion aids 02 which are supplied with the seat to the upward *

pointing part of the two ISOFIX fastening points 01 of your vehicle.

TIP!

The ISOFIX fastening points are located between the surface and the back-

rest of the vehicle seat.

* The insertion aids facilitate the installation of the child safety seat with the use of the

SOFIX fastening points and prevent damage to the car seat covers. As long as they

are not used, remove them and keep them in a safe place. For vehicles with foldable

a backrest, the insertion aids need to be removed before folding the backrest. Any

problems occurring usually come from soiling or external objects on the insertion aids

and on the hook. Remove soiling or external objects to rectify such problems.

2. Moving the headrest of the vehicle seat into the top position.

3. Carry out the steps in Section 8 "ADJUSTING THE HEADREST & SE-

CURING THE SICT“.

The

KIDFIX SL / KIDFIX SL SICT

is installed permanently in the vehicle with the

ISOFIT locking arms.

Your child is then buckled into the child seat with the vehicle's 3-point seatbelt.

4. Place the child seat facing forward (in the direction

of travel) on a suitable vehicle seat.

5. Hold the ISOFIT

adjustment button 11 down and

fully extend the ISOFIT locking arm furthest from

the vehicle door07 .

6. Press the red ISOFIT locking button

to ensure

that the hook on the ISOFIT locking arm

is open

and ready for use.

0807

16 12

8. Hold the ISOFIT adjustment button 11 down and

fully extend the ISOFIT locking arm nearest to the

vehicle door07 .

UNFASTENING YOUR CHILD AND REMOVAL:

To unfasten your child or to remove the child safety seat, observe the steps

in Section 6 „REMOVAL“ [PAGE I]

0807

1. Carry out the steps in Section 8 "ADJUSTING

THE HEADREST & SECURING THE SICT“.

2. Place the child seat on the vehicle seat. Ensure

that the backrest 16 is ush with the backrest of À

the vehicle seat.

Tip! If the headrest of the vehicle seat gets in the

way, turn it the other way.

3. Carry out the steps in Section 10 „SECURING

YOUR CHILD“.

For the safety of your child, before every journey in the car check

that...

Źthe child safety seat is securely fastened;

Źthe lap belt

runs in the bright red belt guides on both sides of the seat

cushion

Źthe diagonal seat belt section 18 on the side of the vehicle seatbelt buck-

le 19 also runs through the light red belt guide 06 of the seat cushion,

Źthe diagonal seat belt section 18 runs through the dark red belt holder 09

of the headrest,

Źthe diagonal seat belt section 18 runs diagonally backward,

Źthe straps are tight and not twisted,

Źthe SICT 03 is installed and used correctly,

Źthe seatbelt buckle 19 must not be positioned on the red belt guide 06 in

the seat cushion.

DANGER! If your child tries to open the vehicle belt buckle 19 , stop the

vehicle as soon as safely possible. Check whether the child safety seat is

correctly fastened and ensure that your child is correctly secured. Explain

to your child the dangers associated with his actions.

UNFASTENING YOUR CHILD AND REMOVAL:

To unfasten your child or to remove the child safety seat, observe the

steps in Section 6 „REMOVAL“ [PAGE I]

The

KIDFIX SL / KIDFIX SL SICT

is not installed permanently in the vehicle. It

is simply secured together with your child using the vehicle's 3-point seatbelt.

KIDFIX SL SICT & KIDFIX SL:

1. Have your child sit down in the child seat.

2. Pull out the vehicle belt and guide it in front of your

child to the vehicle seat buckle 19.

DANGER! Ensure the vehicle belt is not twisted, as

otherwise the full protective effect of the

retaining system is not ensured.

3. Engage the buckle tongue in the vehicle seat buck-

le 19 with a CLICK!

4. Place the diagonal seat belt section 18 and lap

belt section 17 on the side of the vehicle seatbelt

buckle 19 into the light red belt guide 06of the seat

cushion.

DANGER! The vehicle seatbelt buckle 19 must

not be positioned between the light red

belt guide 06 and the armrest.

5. Also place the lap belt section 17 on the other side

of the seat cushion in the light red belt guide 06 .

DANGER! The lap belt section 17 must lie as low

as possible over your child's hips on

both sides.

6. Guide the diagonal seat belt section 18 into the dark

red belt holder 09 of the headrest 14 until it lies

completely in the belt holder 09 and is not twisted.

Tip! If the backrest 16 conceals the belt holder 09,

you can adjust the headrest 14 upwards. The diagonal

seat belt section 18 can now be easily inserted. Now

return the headrest 14 to the proper height.

7. Make sure that the diagonal belt 18 runs over your

child's shoulder, and not in front of his or her neck.

Tip! You can still adjust the height of the headrest

14 again here in the vehicle.

DANGER! The diagonal seat belt section 18 must

run diagonally backward. You can

adjust the course of the belt with your

vehicle's adjustable belt deÀector.

DANGER! The diagonal belt 18 must never be di-

rected forwards to the belt deÀector on

the vehicle. In this case, use the child

safety seat on the back seat only.

8. Tighten the vehicle seat belt by pulling on the diag-

onal seat belt section 18 .

9. Observe the further steps of the relevant instal-

lation type.

17 06

ONLY KIDFIX SL SICT:

Press the SICT 03 into both SICT fastening points on

the side of the child seat nearest the vehicle door

and clip in the SICT

03 .

CAUTION! Make sure that there is a gap of ap-

proximately 5 mm between the SICT

and the vehicle door in order to avoid

pressure marks and other damage to

the door trim.

How to secure the SICT:

BRITAX RÖMER

Kindersicherheit GmbH

Blaubeurer Straße 71

D-89077 Ulm

Germany

T.: +49 (0) 731 9345-199/-299

F.: +49 (0) 731 9345-210

E.: service.de@britax.com

www.britax.eu

BRITAX EXCELSIOR

LIMITED

1 Churchill Way West

Andover

Hampshire SP10 3UW

United Kingdom

T.: +44 (0) 1264 333343

F.: +44 (0) 1264 334146

E.:

service.uk@britax.com

www.britax.eu

If you have any further questions regarding its use, please feel free to

16 14

150415_KIDFIX_SL_KIDFIX_SL_SICT_GB.indd 2 15.04.2015 08:23:32

Produktspezifikationen

Marke:	Britax
Kategorie:	Autositz
Modell:	Kidfix SL SICT
Breite:	450 mm
Tiefe:	510 mm
Gewicht:	6700 g
Produktfarbe:	Black, White
Höhe (min):	660 mm
Höhe (max):	850 mm
Befestigungstyp:	ISOFIX
Einstellbare Rückenlehne:	Ja
Autositzgruppe:	2-3 (15 - 36 kg; 3,5 - 12 Jahre)
anpassbare Kopfstütze:	Ja
Gurtverschlusstyp:	3-Punkt
Abwaschbare Abdeckung:	Ja