Bretford EC2741FF-GM Bedienungsanleitung

Bretford Multimedia-Karte EC2741FF-GM

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Bretford EC2741FF-GM (3 Seiten) in der Kategorie Multimedia-Karte. Dieser Bedienungsanleitung war für 27 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/3

EC2741

COMPUTER WORK STATION /

PROJECTOR TABLE

Assembly Instructions

Parts List

Qty. Part No. Description

1 022-2014 Top Section Assembly

(with Modesty Panel/Wire Bin)

1 022-2013 Leg Assembly with CPU Shelf

1 022-1694 Leg Assembly

1 010-2336 Cross Brace

1 010-3273 CPU Side Bracket - Stationary

1 010-3058 CPU Side Bracket - Adjustable

2 015-0002 4" Swivel Caster-Rear

2 015-0003 4" Swivel Caster with Brake-Front

Hardware List

Qty. Ref. Part No. Description

2 AA 030-0307 5/16-18 x 5/8" Hex Head Bolt

2 BB 030-0421 5/16-18 Hex Nylock Nut

8 CC 030-0253 1/4-20 x 3/4" Combo Head Screw

8 DD 030-0120 1/4-20 Square Nut

2 EE 030-0272 1/4-20 x 1/2" Carriage Bolt

2 FF 030-0325 1/4-20 x 1/2" Combo Truss Screw

4 GG 030-0256 1/4-20 Flange Nut

2 HH 031-1822 Velcro - Hook

2 I I 031-1823 Velcro - Loop

Tools Required

Phillips Screw Driver

1/2" Open End Wrench

Step 1

With the top section assembly placed face down on a carpeted surface (or cardboard), position the modesty

panel toward the rear. Then determine whether the leg assembly with the cpu shelf will be located on the left or

right side of your table (when turned over upright). The above view shows a right hand shelf location. Slide one leg

assembly into the leg extensions from the top section assembly as shown. Align the mounting holes until the

desired height is achieved. Note: the table height is adjustable from 27" to 41" when casters are installed.

Once the height is set, install 1/4-20 screws (CC) and 1/4-20 nuts (DD). Install the second leg the same as the

first leg. Tighten securely.

Leg Assembly

w/ CPU Shelf

Leg Assembly

Top Section Assembly

Step 2

Attach the cross brace to the two leg assemblies using 5/16-18 screws (AA) and 5/16-18 nylock nut (BB). Two

1/2" open end wrenches recommended to tighten the 5/16-18 hardware.

Open end facing up

Step 3

Install two casters without the brake at the rear of the table by inserting the stem of the caster into the sockets

of leg assembly base. Repeat the same for the two casters with the brake at the front of the table.

The table is ready to be turned upright.

FRONT

Part #031-3359

Rev. 06.03.05 CH

Step 4

When mounting the cpu brackets, the first set of mounting holes to the front edge of the cpu shelf are utilized

whether the side shelf is mounted on the left or right side of the table. Attach stationary cpu side bracket with

flange facing the exterior of the table and secure with 1/4-20 screws (FF) and 1/4-20 flanged nuts (GG) as

shown. Attach adjustable cpu side bracket with flange facing the exterior of the table and secure with 1/4-20

carriage screws (EE) and 1/4-20 flanged nuts (GG) as shown.

Stationary

CPU

Bracket

Adjustable CPU

Bracket

Step 5

Attach two pieces of velcro-hook (HH) and loop (I I) to each cpu brackets interior surface as shown. This will

hold your cpu in place by keeping it from moving forward or backward on the shelf.

I I HH

I I

Bretford Bretford Ltd.

11000 Seymour Avenue Technology House

Franklin Park, IL 60131 7 Lake End Court, Taplow

TEL: 847.678.2545 Bucks SL6 0JQ England

800.521.9614 TEL: 01628 603558

FAX: FAX: 847.678.0852 01628 604923

800.343.1779

www.bretford.com

Produktspezifikationen

Marke:	Bretford
Kategorie:	Multimedia-Karte
Modell:	EC2741FF-GM
Breite:	939.8 mm
Tiefe:	571.5 mm
Produktfarbe:	Grau
Höhe:	1041.4 mm
Material:	Stahl
Typ:	Multimedia-Wagen
Höheneinstellung:	355.6 mm
Verpackungsabmessungen (BxTxH):	508 x 635 x 990.6 mm
Maximale Bildschirmgröße:	24 "