Braun BNC 010 Bedienungsanleitung

Braun Radiowecker BNC 010

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Braun BNC 010 (8 Seiten) in der Kategorie Radiowecker. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/8

BNC010-RC

Global

radio controlled

alarm clock radio

English

User instructions

Guarantee

1. 2.

UK/DE/JP Version

US Version

Poor signal quality Acceptable signal quality

Excellent signal quality

5 6 7 8 9

192018

English

Battery precautions

1. Do not use rechargeable batteries.

2. Use only alkaline AA batteries of the same or equivalent type.

3. Insert batteries with the correct polarity.

4. Keep batteries away from children.

5. Dispose of exhausted batteries according to local legal

requirements. Do not dispose them by throwing away with normal

household rubbish.

6. Avoid short circuiting the contacts in the battery compartment

and battery terminals.

7. Remove batteries from the unit if it will be not used for long

period of time.

8. Exhausted batteries should be removed from the battery

compartment to prevent over-discharge, which can cause leakage

and may cause damage to the clock.

Getting started

1. If a DC adapter is being used to power the clock, plug the

adapter into the DC jack at the back of the clock.

2. If using batteries, insert 4xAA new batteries as indicated in the

battery compartment, and press the RESET key to reset the clock.

3. Slide the OFF/US/UK/DE/JP switch to your desired country

mode. After 8 seconds, the clock will automatically start scanning

for the radio controlled time signal.

Function keys

TIME /OFF/ALARM switch

- Slide to the TIME position to set the clock time.

- Slide to the ALARM position to set the alarm time.

- Slide to the OFF position to exit the setting mode and return to

normal display.

+ key

- In normal display, press to switch between 12/24 hour format. In

setting mode press to increase the setting value. Press and hold

to speed up the setting.

- key

- In setting mode press to decrease the setting value. Press and

hold to speed up the setting.

ALARM ON/OFF button

- Press to turn the alarm on/off.

SNOOZE/LIGHT button

- Press to turn on the backlight for 5 seconds.

- Press to stop the alarm and activate the snooze function.

RESET key

- Press by using a pin to reset all values to default. In case of a

malfunction, the unit has to be reset.

OFF/US/UK/DE/JP switch

- Slide to switch between US/UK/DE/JP mode, and to turn off the

RC function.

BEEP/AUTO switch

- In alarm mode, slide to BEEP position and the normal alarm

sound will be heard at the alarm time; slide to AUTO position and

the radio will automatically turn on at the alarm time.

▲ key

- Press to increase the AM/FM frequency. Press and hold to

speed up the setting.

key

- Press to decrease the AM/FM frequency. Press and hold to

speed up the setting.

VOLUME knob

- Press to turn the radio on/off.

- In radio mode, rotate clockwise to turn the volume up. Rotate

counterclockwise to turn the volume down.

AM/FM key

- Slide to switch between AM and FM modes.

M1/M2/M3 buttons

- Press to pre-set your desired radio stations.

RCC key

- Press to receive the RC signal in order to test the reception.

Product description (Image 1)

1. LCD display

2. TIME /OFF/ALARM switch

3. + key

4. - key

5. ALARM ON/OFF button

6. SNOOZE/LIGHT button

7. M1 button

8. M2 button

9. M3 button

10. VOLUME knob

11. AM/FM key

12. key▲

13. key

14. OFF/US/UK/DE/JP switch

15. RCC key

16. RESET key

17. BEEP/AUTO switch

18. Radio battery compartment

19. Clock battery compartment

20. DC jack

Display symbols (Image 2)

A. Time

B. RC signal strength indicator

C. DST

D. Memory radio station

E. Radio frequency

F. Alarm time

G. Alarm icon

H. Time zone

Time zone setting (US version only)

In US mode, the default time zone is PACIFIC. If your location is not in

the Pacic zone, set the time zone as follows:

1. In normal time mode, Slide the OFF/US/UK/DE/JP switch to the US

position in order to enter the time zone setting mode.

2. Press “+” “-” key again to select the relevant time zone: P=Pacic

M=Mountain C=Central E=Eastern.

RC signal strength indicator (Image 3)

The signal indicator displays signal strength in 3 levels. Wave segment

ashing means time signals are being received.

Note: You may use the RCC key to receive the time signal manually.

The receive mode stops automatically after 6-12 minutes.

Setting the time

1. Slide the “TIME/OFF/ALARM” switch to the TIME position.

2. Press the “+” or “-” key to set the desired value.

3. Slide the “TIME /OFF/ALARM ” switch to the OFF position to return

to normal display and save the settings.

Setting the alarm

1. Slide the “TIME/OFF/ALARM ” switch to the ALARM position.

2. Press the “+” or “-” key to set the desired value.

3. Slide the “TIME /OFF/ALARM ” switch to the OFF position to return

to normal display and save the settings.

Using the alarm and snooze function

1. Activate the alarm by pressing the “ALARM ON/OFF” button. The bell

icon “ ” will appear on the LCD display.

2. Press the SNOOZE/LIGHT button to stop the alarm and activate the

snooze function. When the alarm sounds, the alarm icon will ash.

3. To de-active the alarm and snooze function, press the ALARM ON/

OFF button. The bell icon will disappear.

Note:

1. When the snooze function is activated, the alarm will automatically

start again after 5 minutes. The snooze function will not stop unless you

press the ALARM ON/OFF button to turn off the snooze.

2. In alarm mode, slide the BEEP/AUTO switch to BEEP position and

the normal alarm sound will be heard at the alarm time.

3. In alarm mode, slide the BEEP/AUTO switch to AUTO position and

the radio will automatically turn on at the alarm time.

AM/FM radio operating

1. Press the VOLUME knob to turn on the radio.

2. Slide the AM/FM switch to select AM/FM.

3. Press the “ ” key or “ ” key to change the frequency.▲

4. Rotate the VOLUME knob to turn the volume up/down.

5. Press the VOLUME knob again to turn the radio off.

Radio station memory

1. In Radio mode, press and hold the “M1/M2/M3” button for 2 seconds

to save the current radio station. The operation will be set successfully

after the “Memory 1/2/3” icon ashes for 3 seconds.

2. After stations are saved, press the “M1/M2/M3” button to return to the

pre-recorded radio station directly.

Battery replacement

When the LCD becomes dim, replace with 2xAA new batteries into the

clock compartment at once.

When the radio stops working replace 2xAA new batteries into the radio

battery compartment at once.

Important

For best reception performance, please read the following instructions.

1. We strongly recommend you start your clock at night. Allow the clock

to receive the signal automatically overnight.

2. Place the unit away from interfering sources such as TV set, comput-

ers, microwaves, etc.

3. Avoid placing the unit on or next to metal surfaces.

4. Avoid closed areas such as airports, basements, cement ofce build-

ings or factories.

Guarantee

2 year guarantee against material and workmanship defects

(except battery). The guarantee is valid in those countries where

the alarm clock is ofcially being sold.

Broken or cracked lens screen are not covered under the

Guarantee.

Braun helpline

Should you have a problem with your product, please check your local

service centre at:

www.braun-clocks.com

www.braun-watches.com

or contact +44 208 208 1833

WARNING! This product is covered by the Waste Electrical

and Electronic Equipment (WEEE) directive. It should not

be discarded with normal household waste but taken to

your local collection centre for recycling.

Braun is a registered trademark of Braun GmbH, Kronberg, Germany used under

license by Zeon Ltd

2. 3. 4. 5.

Produktspezifikationen

Marke:	Braun
Kategorie:	Radiowecker
Modell:	BNC 010
FM-Radio:	Ja
Produktfarbe:	Blau
Akku-/Batterietyp:	AA
Radiotyp:	Uhr
Snooze Funktion:	Ja
Display:	LCD
Anzahl unterstützter Akkus/Batterien:	4
Abmessungen (BxTxH):	180 x 56 x 90 mm
Hintergrundbeleuchtung:	Ja
Farbe der Hintergrundbeleuchtung:	Blau