Braemar Ecostar WF30 Bedienungsanleitung
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Braemar Ecostar WF30 (2 Seiten) in der Kategorie heater. Dieser Bedienungsanleitung war fĂĽr 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
Warranty Service
Australia 1-300-650-644
seeleyinternational.com
612195M AU 110
seeleyinternational.com.au
(English) (WF30/40)
OWNER’S MANUAL
Wall Furnace - WF30/40
Name of Technician and company
(Print)
Signature of Technician
Date of attendance
Year 2 4 86 10
Maintenance Schedule
Cabinet and components
Cabinet
Heat exchanger
Electrical connections
Combustion air inlet louvres
Electrical
Electrical wiring
Room fan motor / impellor
Thermocouple voltage
Overtemp switch
Operation
Start up and run sequence
Control operation
Complete ignition
Gas inlet pressure
Gas test point pressure High
General installation
Rear register
Flue system, cowl
Gas, burners, ignition
Main burner and injector
Pilot gas rate
Pilot ignition / ignition electrode
Gas test point pressure Low
Thermostat operation
Draught diverter (NOTE 1)
kPa
kPa
kPa
kPa
kPa
kPa
kPa
kPa
kPa
kPa
kPa
kPa
kPa
kPa
kPa
Action taken key:
= Inspected and working correctly no action required
A = Adjustment of part
C = Cleaning of part
R = Replaced part
Pilot burner and injector
It is a condition of your warranty cover that the items in the Schedule below are checked (and action taken as required)
every two (2) years after the date of installation by a qualified, licenced technician, and that the Schedule is properly
filled out (ie names, signature, date, and action taken). Even after the warranty period expires, please continue to have
the product maintained every two years as per the items in the Schedule. This will help to prolong the life of the product
and keep it running efficiently.
It is the policy of Seeley International to introduce continual product improvement. Accordingly, specifications are subject to change without notice.
Please consult with your dealer to confirm the specifications of the model selected.
To owner/user: please note that as explained in your Warranty Card, installation is not covered by the warranty (for example, electrical and gas
connections to the Wall Furnace). However, we still require that you have these things checked, because they can affect the performance (and/or
safety) of the heater. This is why we have included them in the Maintenance Schedule. Further, routine maintenance may be required more
frequently in non-domestic applications or when operating in adverse environmental situations. It is your obligation to ensure that you comply with
these requirements.
Electrical and gas connections
NOTE 1:
Check operation of flue and draft diverter in accordance with detailed instructions included in AS/NZS 56001.
SEELEY INTERNATIONAL – OWNER’S MANUAL 2
Introduction
For satisfactory performance of your
Braemar gas wall furnace, please read
these instructions carefully. The
operation of the heater is controlled by
the gas control knob and fan switch
located behind the access door on the
front cover.
Fan Operation
The fan will start automatically in both
AUTO and BOOST positions when the
unit is warm enough after the burner is
turned on, and stop automatically when
the unit has cooled sufficiently after the
burner turns off. With AUTO selected
the unit will automatically select
between "low" and "normal" (and
“boost” on 40MJ models) fan speeds
based on the heated air temperature -
no further user adjustment is necessary.
When BOOST is selected the fan will
run only on its boost speed. It is
recommended that the manual fan
switch be set to AUTO for normal
operation, or BOOST for rapid heat-up.
Gas Control
To light the heater:
- Turn the gas control knob anti-
clockwise from the “0” position to the
position.
- Depress knob fully and hold down.
- Press the igniter button located next to
the gas control knob 3-4 times.
- Observe the pilot meter to indicate
operation of the pilot.
- Wait 20 seconds then release the gas
control knob and check the pilot meter
stays on.
- Repeat the process if required.
OPERATING INSTRUCTIONS
1 WF30/40
Gas control knob
Igniter button
Pilot meter
Fan
Auto / Boost
switch
IMPORTANT MAINTENANCE (AND WARRANTY) INFORMATION
As with any product that has moving parts or is subject to wear and tear, it is VERY
IMPORTANT that you maintain your wall furnace and have it regularly serviced. It is a
condition of warranty cover for your wall furnace that you comply with all of the maintenance
and service requirements set out in this Owner’s Manual. Compliance with these
requirements will prolong the life of your wall furnace. Further, it is also a condition of
warranty cover that each item in the Maintenance Schedule in this Owner’s Manual is
performed with the frequency indicated, by a qualified, licensed technician, and that the
Maintenance Schedule is properly filled out (ie names, signature, date, and action taken)
when the item is completed. ANY FAILURE TO CARRY OUT THE REQUIRED
MAINTENANCE AND SERVICING REQUIREMENTS, AND ANY FAILURE TO PROPERLY
FILL OUT THE MAINTENANCE SCHEDULE, WILL VOID YOUR WARRANTY.
Warning
DO NOT: Place articles on or against this appliance.
DO NOT: Use or store flammable materials near this appliance
DO NOT: Spray aerosols in the vicinity of this appliance while it is in operation.
DO NOT: Modify this appliance.
IMPORTANT
If for any reason your heater experiences,
a POWER FAILURE, the “Pilot Flame” is
TURNED OFF, or GOES OUT, a period of up to
5 minutes is required for the heater to reset.
If the heater has not reset, the
“Gas control knob” will NOT turn easily.
PLEASE DO NOT FORCE
Damage to the mechanism may occur.
Care Instructions
External surfaces should be cleaned with warm water and detergent with the heater turned off.
Do not use abrasive cleaners as scratching of the surface will occur.
Heat Setting
- Turn gas control knob anti-clockwise to
desired heat setting between “1” and
“7”.
- The heater will automatically adjust the
gas flow to maintain the room
temperature corresponding to the
selected heat setting.
To Increase Heat Setting
- Turn gas control knob anti-clockwise
towards “7”.
To Decrease Heat Setting
- Turn gas control knob clockwise
towards “1”.
To Turn Off Main Burner (Pilot-Stand by)
- Turn gas control knob clockwise
to a position between the word PILOT
& the symbol .
(see Figure 1 below)“Pilot zone”
It is recommended that the pilot be
left in operation during the heating
season.
To Turn Off Completely (end of heating
season)
- Turn gas control knob clockwise
to the “0” position.
Figure 1:
To Turn Off Main Burner (Pilot-Stand by)
Heater will now only re-start when control knob
is turned to a heat setting of 1 to 7.
“Pilot zone”
Produktspezifikationen
Marke: | Braemar |
Kategorie: | heater |
Modell: | Ecostar WF30 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Braemar Ecostar WF30 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung heater Braemar
15 August 2024
14 August 2024
12 August 2024
12 August 2024
10 August 2024
8 August 2024
7 August 2024
7 August 2024
6 August 2024
6 August 2024
Bedienungsanleitung heater
- heater Sinbo
- heater AFK
- heater Infiniton
- heater Clatronic
- heater Domo
- heater Emerio
- heater Tristar
- heater HP
- heater Nedis
- heater Philips
- heater SilverCrest
- heater Sunbeam
- heater Cotech
- heater Profile
- heater Quigg
- heater Adler
- heater Camry
- heater Guzzanti
- heater Princess
- heater Bosch
- heater Parkside
- heater Vonroc
- heater AEG
- heater Ardes
- heater Bauknecht
- heater Concept
- heater Electrolux
- heater Fagor
- heater Gorenje
- heater Jata
- heater Klarstein
- heater Lervia
- heater Solis
- heater Unold
- heater Bomann
- heater Essentiel B
- heater Hendi
- heater Korona
- heater Melissa
- heater OK
- heater Steba
- heater Taurus
- heater Tefal
- heater Vox
- heater Velleman
- heater ECG
- heater EMOS
- heater Thomson
- heater Black And Decker
- heater Trotec
- heater Blaupunkt
- heater Cuisinart
- heater Eldom
- heater Eta
- heater Heinner
- heater Hema
- heater Maestro
- heater Prime3
- heater Primo
- heater Solac
- heater Wilfa
- heater Dometic
- heater Eureka
- heater Alpina
- heater Candy
- heater DeWalt
- heater CorberĂł
- heater Einhell
- heater Bartscher
- heater Midea
- heater Otsein-Hoover
- heater Svan
- heater Zanussi
- heater King
- heater Eurom
- heater Elro
- heater Olympia
- heater Hyundai
- heater Orava
- heater Livoo
- heater Stanley
- heater DCG
- heater Tectro
- heater Crane
- heater GĂĽde
- heater Perel
- heater Bimar
- heater Stadler Form
- heater Rowenta
- heater Sencor
- heater DeLonghi
- heater Piazzetta
- heater Vasco
- heater Hartig And Helling
- heater Reer
- heater Maxwell
- heater Ariete
- heater Kalorik
- heater Optimum
- heater Scarlett
- heater Superior
- heater Ufesa
- heater Anslut
- heater Calor
- heater Cecotec
- heater Qlima
- heater Bionaire
- heater Duux
- heater Haverland
- heater Honeywell
- heater Remko
- heater Suntec
- heater Zibro
- heater Dedra
- heater Carson
- heater Zehnder
- heater Broan
- heater MPM
- heater Thermex
- heater Imetec
- heater Logik
- heater Team
- heater Fluval
- heater Burley
- heater Stiebel Eltron
- heater Truma
- heater Brandson
- heater Heller
- heater Dimplex
- heater Sonnenkönig
- heater Eurolite
- heater Noirot
- heater Gre
- heater Mora
- heater Milwaukee
- heater Heylo
- heater Baxi
- heater Tesy
- heater Vivax
- heater EWT
- heater Kogan
- heater Royal Sovereign
- heater Innoliving
- heater Conceptronic
- heater Argo
- heater HQ
- heater Vasner
- heater Master
- heater Dovre
- heater Alpatec
- heater Olimpia Splendid
- heater SereneLife
- heater Sygonix
- heater Vitek
- heater AKO
- heater SHX
- heater Danby
- heater Sogo
- heater Fantini Cosmi
- heater Kent
- heater Mellerware
- heater Evolar
- heater EasyMaxx
- heater La Nordica
- heater Eden
- heater Real Flame
- heater Ferroli
- heater Zibro Kamin
- heater Blumfeldt
- heater Signature
- heater Wamsler
- heater Trumatic
- heater Sun Joe
- heater Noveen
- heater Swan
- heater Soler & Palau
- heater Mill
- heater Harvia
- heater Orbegozo
- heater Dantherm
- heater Izzy
- heater Jøtul
- heater Haas+Sohn
- heater Defy
- heater Duro Pro
- heater Duronic
- heater Etherma
- heater Extraflame
- heater Grandhall
- heater Heatstrip
- heater Jaga
- heater Jocel
- heater Just Fire
- heater Kambrook
- heater Kenmore
- heater Lavorwash
- heater Nestor Martin
- heater Nobo
- heater Nordic Fire
- heater Plieger
- heater Prem-i-air
- heater Solamagic
- heater SPT
- heater SunRed
- heater Vornado
- heater Waldbeck
- heater Wanders
- heater WestBend
- heater AstralPool
- heater Argoclima
- heater Lasko
- heater Hatco
- heater Barbecook
- heater Dri Eaz
- heater Kunft
- heater Becken
- heater Nevir
- heater Rinnai
- heater Blaze
- heater Masport
- heater Hubbell
- heater Escea
- heater Ravanson
- heater Pacific Energy
- heater XPower
- heater Lenoxx
- heater Neo
- heater Jindara
- heater NewAir
- heater Air King
- heater AENO
- heater Brivis
- heater Chauvet
- heater Creda
- heater Nectre
- heater IXL
- heater JANDY
- heater Martec
- heater Ionmax
- heater Regency
- heater GoldAir
- heater Arnold Rak
- heater Guardian
- heater Ouellet
- heater Gasmate
- heater Bromic
- heater Rheem
- heater Yellow Garden Line
- heater Scandia
- heater Pureheat
- heater Fiap
- heater Gossmann
- heater Quadra-Fire
- heater Everdure
- heater Blue Rhino
- heater Mission Air
- heater Create
- heater VIESTA
- heater Big Ass Fans
- heater Brentwood
- heater Omega Altise
- heater Airo
- heater Hortus
- heater Ausclimate
- heater Brixton
- heater Euromac
- heater TAIDEN
- heater Veito
- heater Tecno Air System
- heater Adax
- heater True North
- heater Heatsome
- heater Invroheat
- heater Herschel
- heater EvoHeat
- heater Fire Sense
- heater InfraNomic
- heater Heat Storm
- heater Excelair
- heater Heatscope
- heater LifeSmart
- heater Heat1
- heater Kemlan
- heater Perfect Aire
- heater AustWood
Neueste Bedienungsanleitung fĂĽr -Kategorien-
18 September 2024
18 September 2024
18 September 2024
17 September 2024
17 September 2024
17 September 2024
17 September 2024
17 September 2024
17 September 2024
17 September 2024