Boss RC-500 Bedienungsanleitung

Boss Nicht kategorisiert RC-500

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Boss RC-500 (28 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/28

Owner’s Manual (this document)

Read this rst. It explains the basic things you

need to know in order to use the RC-500.

Parameter Guide (download from the Web)

This explains all of the parameters of the RC-500.

To obtain the Parameter Guide

1. Enter the following URL on your

computer.

http://www.boss.info/manuals/

2. Choose “RC-500” as the product name.

Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (the leaet “USING THE

UNIT SAFELY” and the Owner’s Manual (p. 27)). After reading, keep the document(s) where it will be available for

immediate reference.

Getting Ready . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Installing the Batteries . . . . . . . . . . . . . . . . . . . . . . . . 2

Connecting the Equipment . . . . . . . . . . . . . . . . . . . 2

Top Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

How the RC-500 Is Organized . . . . . . . . . . . . . . . . . . 6

Creating a Loop Phrase . . . . . . . . . . . . . . . . . . . . . . 7

Recording on a Single Track . . . . . . . . . . . . . . . . . . . 7

Recording on Two Tracks . . . . . . . . . . . . . . . . . . . . . . 8

Record While Listening to the Rhythm Sound . . . . 9

Sounding a Rhythm . . . . . . . . . . . . . . . . . . . . . . . . 9

Setting the Tempo of Rhythm . . . . . . . . . . . . . . . . 9

Saving a Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Saving a Memory (WRITE) . . . . . . . . . . . . . . . . . . . . . 10

Erasing Data from a Memory (CLEAR) . . . . . . . . . . . 10

Editing a Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Editing the Settings of Tracks 1 and 2 . . . . . . . . . . . 11

Editing the Settings of a Memory . . . . . . . . . . . . . . 12

Using the Loop FX . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Specifying the Function of the Switches . . . . . . . 13

Editing the Rhythm Settings . . . . . . . . . . . . . . . . . . . 14

Changing How the Rhythm Starts and Stops . . . 15

Settings for the Entire RC-500 . . . . . . . . . . . . . . . . 16

System Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Input/Output Settings . . . . . . . . . . . . . . . . . . . . . . . . 17

Connecting a Computer via USB . . . . . . . . . . . . . 18

Connecting the RC-500 and Computer . . . . . . . . . 18

Backing-Up or Recovering Data . . . . . . . . . . . . . . . . 19

Controlling Devices via MIDI . . . . . . . . . . . . . . . . . 20

MIDI Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Controlling an External MIDI Device from the

RC-500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Controlling the RC-500 from an External MIDI

Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Connecting Two RC-500 Units . . . . . . . . . . . . . . . . . 21

Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Error Message List . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Restoring the Factory Default Settings

(Factory Reset) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Main Specications . . . . . . . . . . . . . . . . . . . . . . . . . . 26

USING THE UNIT SAFELY . . . . . . . . . . . . . . . . . . . . . 27

IMPORTANT NOTES . . . . . . . . . . . . . . . . . . . . . . . . . 27

Owner’s Manual

Getting Ready

Installing the Batteries

Install four alkaline batteries (AA, LR6) in the battery compartment located on the bottom of the unit.

* When turning the unit over, be careful so as to protect the buttons and knobs from damage. Also, handle the unit

carefully; do not drop it.

* If you handle batteries improperly, you risk explosion and uid leakage. Make sure that you carefully observe all of

the items related to batteries that are listed in “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (separate sheet

“USING THE UNIT SAFELY” and owner’s manual (p. 27)).

* “BATTERY LOW” will appear on the display if the batteries are low. Replace them with new ones.

Attaching the Rubber Feet

You can attach the rubber feet (included) if necessary.

Attach them in the locations shown in the illustration.

Connecting the Equipment

* To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making

any connections.

* Before turning the unit on/o, always be sure to turn the volume down. Even with the volume turned down, you

might hear some sound when switching the unit on/o. However, this is normal and does not indicate a malfunction.

Pin assignment

MIC IN connector

1: GND

2: HOT

3: COLD

O (USB ) port

You can connect your computer here and use it

to back up or recover data (p. 19).

MIDI OUT, MIDI IN connectors

Connect an external MIDI device here.

To make these connections, use TRS/MIDI connecting cables (sold separately:

BMIDI-5-35).

This lets you control an external MIDI device from this unit via MIDI. For

details, refer to p. 20.

Accepts connection of an AC Adaptor (PSA-S series;

sold separately). By using an AC Adaptor, you can play

without being concerned about how much battery

power you have left.

If the AC adaptor is connected while power is on, the

power supply is drawn from the AC adaptor.

DC IN jack

* Use only the specied AC adaptor

(PSA-S series; sold separately),

and connect it to an AC outlet of

the correct voltage. Do not use

any other AC adaptor, since this

may cause malfunction.

Getting Ready

Connecting the Equipment

OUTPUT jacks (A/MONO, B)

To use this as EXP jack

Connect an expression pedal.

To use this as CTL 1, 2 jack

Connect a footswitch.

Use only the specied expression pedal (FV-500H,

FV-500L, EV-30, and Roland EV-5; sold separately).

By connecting any other expression pedals, you

risk causing malfunction and/or damage to the

unit.

FS-6 FS-7

CTL 2

FS-5U x 1

FS-5U

FS-6

Mode/Polarity switch

FS-7

1/4” phone type

Stereo 1/4” phone type

CTL 1CTL 2 CTL 1CTL 1

CTL 1, 2/EXP jack

You can connect separately sold expression pedal or

footswitches to this jack, and use the expression pedal

or footswitches to control a variety of functions.

INST IN jacks (A/MONO, B)

Connect your electric guitar/bass or eect unit

to these jacks.

Use the A/MONO jack and B

jack when connecting a stereo-

output eects unit. Use only

the A/MONO jack if you’re

using a mono source.

Connect these jacks to your amp or monitor speakers.

If you’re using a mono setup, use only the A/MONO jack.

Even sound that is input in stereo is output in mono.

Turning the power on/o

The OUTPUT A/MONO jack doubles as the power switch.

Power to the unit is turned on when you plug into the OUTPUT

A/MONO jack; the power is turned o when the cable is

unplugged.

When powering up:

Turn on the power to your amp last.

When powering down:

Turn o the power to your amp rst.

MIC IN connector

Connect your microphone here.

If you’re using a condenser mic

that requires phantom power, turn

on this unit’s phantom

power (p. 17).

Pin assignment

CTL 1, 2/EXP jack

RINGTIP

Stereo 1/4” phone type

1/4” phone type x 2

CTL 1 CTL 2

FS-5U x 2

Produktspezifikationen

Marke:	Boss
Kategorie:	Nicht kategorisiert
Modell:	RC-500
Display-Typ:	LCD
Breite:	170 mm
Tiefe:	138 mm
Gewicht:	950 g
Produktfarbe:	Rot
Übertragungstechnik:	Kabelgebunden
Akku-/Batterietyp:	AA
Höhe:	62 mm
Energiequelle:	Battery, DC
Eingebautes Display:	Ja
Anzahl USB 2.0 Anschlüsse:	1
Gleichstrom-Anschluss (DC):	Ja
Betriebsanleitung:	Ja
Anzahl unterstützter Akkus/Batterien:	4
Akkus/Batterien enthalten:	Ja
6,35 mm (1/4-Zoll) Eingang:	1
MIDI-Out:	Ja
Bit-Rate:	32 Bit
MIDI-In:	Ja
Betriebszeit:	3.5 h
Geräuschkulisse:	Looper
6,35 mm (1/4-Zoll) Ausgang:	1
Maximale Aufnahmezeit Looper:	46800 s