Boss MS-3 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Boss MS-3 (14 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂŒr 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/14
1
Using MS-3 Editor/Librarian
This document explains basic operation of MS-3 Editor/Librarian
(subsequently referred to as “EDITOR”).
Getting Ready to Use EDITOR
Important terms in EDITOR
Library
This is a storage area inside EDITOR.
Patches that you back up from the MS-3 are saved in the library.
Liveset
A liveset is a group of multiple patches.
Patches that you back up from EDITOR are grouped as a liveset and
saved in the library inside EDITOR.
You can also collect your favorite patches to create an original
liveset.
Installing the USB Driver
Before you use EDITOR, the appropriate USB driver for the product you’re
using must be installed on your computer.
1. From the product support page, download the Driver.MS-3
To obtain the latest USB driver, access the following URL, and
download and install the appropriate driver for the product you’re
using.
https://www.boss.info/support/
2. Double-click the downloaded MS-3 Driver.
Installation begins.
Proceed with the installation as directed by the installation screens.
When the screen indicates “Installation has been completed.” click
the [Close] button.
The MS-3 Driver has been installed on your computer.
Installing EDITOR
MEMO
Before you install EDITOR, the USB driver must be installed in your
computer as described in “Installing the USB Driver” (p. 1).
Windows users
1. Download “MS-3 Editor/Librarian” from the product
support page.
2. Double-click the downloaded le to decompress it.
3. Inside the folder created by decompressing the le,
double-click “MS-3 Editor/Librarian.exe.”
Installation begins.
Proceed with installation as directed by the installation screens.
When the screen indicates “Installation has been completed.” click
the [Close] button.
Mac OS users
1. Download “MS-3 Editor/Librarian” from the product
support page.
2. Double-click the downloaded le to decompress it.
3. Double-click the decompressed le.
A “MS-3 Editor/Librarian” icon and “Applications folder” icon appear.
4. Drag and drop the “MS-3 Editor/Librarian” icon onto the
“Applications folder” icon.
MS-3 Editor/Librarian is added to the applications.
Close the folder that you opened in step 3.
Copyright © 2017 ROLAND CORPORATION 01
Using MS-3 Editor/Librarian
2
Starting EDITOR
1. Use a USB cable to connect the MS-3 to your computer, and
then turn on the power of the MS-3.
MEMO
You can edit livesets even if the MS-3 is not connected to your
computer via a USB cable.
However, you can’t save the result of editing a patch. In order to save
the edited patch, you’ll need to be connected to your computer.
2. Double-click the EDITOR shortcut icon.
The rst time you start up, the dialog box “Choose a device connect
with.” appears.
MEMO
On the second and subsequent startups, the device is selected
automatically.
Mac OS users
From the Finder, in the application folder, double-click [MS-3 Editor/
Librarian].
3. Choose “MS-3,” and click the [OK] button.
EDITOR starts.
MEMO
Since data will be loaded from the MS-3, it may take some time until
you can use EDITOR.
Editing a Patch
As an example, we’ll explain how to edit the user patch “01-1 NATURAL
CLEAN.”
1. In the upper left of EDITOR screen, click the [EDITOR]
button.
2. Click the patch that you want to edit. In this example, click
“01-1 NATURAL CLEAN.”
3. In the eect chain screen (the upper part of the screen),
click the icon of the eect that you want to edit. In this
example, click the [MOD1] icon.
The icon of the eect you clicked is lit blue, and the eect settings
are shown.
Selected eect settings
Using MS-3 Editor/Librarian
3
4. Edit the eect.
MEMO
5If you want to change the type of MOD1, click the [ I] button located
at the right of the amp name.
5You can also change the placement of the various eect types in the
eect chain screen. Drag and drop the eect that you want to move.
(You can move it to the location shown in red.)
5. If you want to edit another eect, repeat steps 3–4.
Saving an Edited Eect to the (WRITE)MS-3
Here’s how to save the edited eect to the MS-3.
1. In the upper right of the EDITOR screen, click the [WRITE]
button.
The “Please select the save-destination” dialog box appears.
2. Select the save-destination user patch number.
In this example, select “01-2.”
NOTE
When you save, the user patch of the selected number is overwritten;
the original settings cannot be recovered. Select a user patch that
you don’t mind overwriting.
3. If you want to change the name of the user patch, click the
user patch name eld. A cursor appears, and you can use
your computer keyboard to enter a user patch name.


Produktspezifikationen

Marke: Boss
Kategorie: Nicht kategorisiert
Modell: MS-3

Brauchst du Hilfe?

Wenn Sie Hilfe mit Boss MS-3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Boss

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂŒr -Kategorien-