Boss GT-1 Bedienungsanleitung
Boss
Effektpedale
GT-1
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Boss GT-1 (12 Seiten) in der Kategorie Effektpedale. Dieser Bedienungsanleitung war fĂĽr 51 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/12
Owner’s Manual (this document)
Read this rst. It explains the basic things you need to know in order to use the GT-1.
PDF Manual (download from the Web)
5Parameter Guide
This explains all parameters of the GT-1.
5Sound List
This is a list of the sounds built into the GT-1.
To obtain the PDF manual
1. Enter the following URL in your computer.
http://www.boss.info/manuals/
I
2. Choose “GT-1” as the product name.
Owner’s Manual
Getting Ready . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Connecting the Equipment . . . . . . . . . . . . . . . . . . . . . . . . 2
Specify the Type of Amplier You Have Connected . . . . 3
Tuning the Guitar (TUNER) . . . . . . . . . . . . . . . . . . . . . . . . . 3
Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Selecting a Patch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Selecting by Patch Number . . . . . . . . . . . . . . . . . . . 4
Choose a Patch Based on a Category
(EASY SELECT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
About the Play Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Editing: Eects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Basic Procedure for Eect Editing . . . . . . . . . . . . . . . . . . . 5
Changing the Eect Connection Order . . . . . . . . . 5
Editing from the Play Screen . . . . . . . . . . . . . . . . . . . . . . . 5
EASY EDIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Saving a Patch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Editing: MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Basic MENU Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Assigning Favorite Parameters to [1]–[3] Knobs . 7
Adjusting the Contrast (Brightness) of the
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Restoring the Factory Default Settings
(Factory Reset) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Connecting to a Computer . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing the USB Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Connecting to a Computer . . . . . . . . . . . . . . . . . . . . . . . . 8
Using the GT-1 as an Audio Interface . . . . . . . . . . . . . . . . 8
Settings for CTL1, EXP1, and an External Pedal . . . . 9
Assigning a Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Adjusting the Expression Pedal
(Pedal Calibration). . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Connecting External Pedals . . . . . . . . . . . . . . . . . . 10
Looper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Loop Playback Level Setting . . . . . . . . . . . . . . . . . . 11
[CTL1] Switch Color. . . . . . . . . . . . . . . . . . . . . . . . . . 11
Error Message List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Main Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
USING THE UNIT SAFELY/IMPORTANT NOTES . . . . . . 12
© 2016 Roland Corporation
Before using this unit, carefully read “USING THE UNIT SAFELY” and
“IMPORTANT NOTES” (leaet “USING THE UNIT SAFELY” and Owner’s
Manual (p. 12)).After reading, keep the document(s) where it will be
available for immediate reference.
2
DC IN jack
This jack is for connecting
an AC adaptor (BOSS PSA
series; sold separately).
Use only the specied AC
adaptor (PSA series), and
connect it to an AC outlet
of the correct voltage.
Do not use any other AC
adaptor, since this may cause
malfunction.
Getting Ready
Connecting the Equipment
USB COMPUTER port
Use a USB cable
to connect to a
computer and
exchange audio
data between
the GT-1 and the
computer (p. 8).
AUX IN jack
Use a stereo-mini plug to
connect your audio player.
Use your audio player’s volume
control to control the volume of
OUTPUT jacks and PHONES jack.
OUTPUT jack
Connect these to your guitar amp or
mixer. If using a mono connection,
use only the L/MONO jack.
INPUT jack
Connect your guitar. The INPUT jack doubles as the power
switch. Power to the unit is turned on when you plug into
the INPUT jack; the power is turned o when the cable is
unplugged.
PHONES jack
You can connect a set of
headphones here.
* Before turning the unit on/o, always be sure to turn the volume
down. Even with the volume turned down, you might hear some
sound when switching the unit on/o. However, this is normal and
does not indicate a malfunction.
Installing the Batteries
Install four alkaline batteries (AA, LR6) in the battery compartment located on the bottom of the unit.
* When turning the unit over, be careful so as to protect the buttons and knobs from damage. Also, handle the unit
carefully; do not drop it.
* If you handle batteries improperly, you risk explosion and uid leakage. Make sure that you carefully observe all of the
items related to batteries that are listed in “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (separate sheet “USING THE
UNIT SAFELY” and Owner’s manual (p. 12)).
* We recommend that you keep batteries installed in the unit even though you’ll be powering it with the AC adaptor. That
way, you’ll be able to continue a performance even if the cord of the AC adaptor gets accidentally disconnected from the
unit.
* To prevent malfunctions or accidents, install or replace the batteries before connecting the unit to other equipment.
* “BATTERY LOW” will appear on the display if the batteries are low. Replace them with new ones.
* To prevent malfunction and equipment failure, always turn down the
volume, and turn o all the units before making any connections.
CTL2, 3/EXP2 jacks (Connecting to External Pedals)
You can control various parameters by connecting an expression pedal
(Roland EV-5: sold separately) or a footswitch (FS-5U, FS-6, FS-7: sold
separately).
For details on the settings, refer to “Settings for CTL1, EXP1, and an External
Pedal” (p. 9).
Turn down the volume of the
connected device
1
Connect your guitar
3
Connect your equipment to the
OUTPUT jack(s)
2
Turn on the power of the
amp(s)
4
3
Getting Ready
Specify the Type of Amplier You
Have Connected
1. Press the [MENU] button.
2. Use the [1] knob to select “OUTPUT,” and then press
the [ENTER] button.
3. Use the [3] knob to select the type of amp.
Value Explanation
JC-120 Choose this if connected to the guitar input of
a Roland JC-120 guitar amp.
SMALL AMP Choose this if connected to a small guitar
amp.
COMBO AMP
Choose this if connected to the guitar input
of a combo-type guitar amp (i.e., a single unit
that contains the amp and speaker) other
than the JC-120.
For some types of guitar amps, the “JC-120”
setting might produce better results.
STACK AMP
Choose this if connected to the guitar input of
a stack-type guitar amp (i.e., one in which the
amp and speaker are separate units).
JC-120 RETURN Choose this if connected to the RETURN jack
of the JC-120.
COMBO RETURN Choose this if connected to the RETURN jack
of a combo-type guitar amp.
STACK RETURN
Choose this if connected to the RETURN jack
of a stack-type guitar amp. You should also
choose “STACK RETURN” if you’re using a
guitar power amp together with a speaker
cabinet.
LINE/PHONES
Choose this if you’re using headphones, or if
the GT-1 is connected to monitor speakers,
mixer, or digital recorder.
4. Press the [EXIT] button a number of times to return
to the play screen (p. 4).
MEMO
In the play screen (p. 4), you can adjust the output level
of the entire GT-1 by turning the [3] knob.
Tuning the Guitar (TUNER)
1. Press the [H], [I] switches simultaneously.
2. Play an open string, and tune it so that only the
center indicator in the screen is lit.
MEMO
You can also tune while watching the [ H], [I], and
[CTL1] switches.
Too low Too highTuned
3. When you nish tuning, press once again the [ H],
[I] switches simultaneously.
Setting the standard pitch
In Tuner mode, you can turn the [1] knob to change the
standard pitch of the tuner.
Pitch
435–445 Hz (default: 440 Hz)
Output setting
In the tuner screen, you can also change the output setting
for when the tuner is in use by turning [3] knob
OUTPUT Explanation
MUTE Sound will not be output while tuning.
BYPASS
While tuning, the sound of the guitar being input to
the GT-1 will be output without change. All eects
will be o.
THRU Allows you to tune while hearing the current eect
sound.
Produktspezifikationen
| Marke: | Boss |
| Kategorie: | Effektpedale |
| Modell: | GT-1 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Boss GT-1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Effektpedale Boss
10 Juli 2024
Andere HandbĂĽcher Boss
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024