Boss CAM25 Bedienungsanleitung

Boss Auto Kit CAM25

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Boss CAM25 (4 Seiten) in der Kategorie Auto Kit. Dieser Bedienungsanleitung war für 32 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
INSTALLATION PRECAUTIONS
• Choose a mounting location in your vehicle
which is protected from foot traffic and
passengers who might accidentally disconnect
the cables.
• Do not install this product in areas which are
susceptible to rain, moisture, direct sunlight,
extreme heat or cold, excessive dust, dirt or
humidity.
• If installation requires drilling holes or
modifications to the vehicle consult your
nearest dealer or professional car audio/video
installer.
• Use only the installation parts provided with the
unit.
• Use only a power source with 12 volts DC
(negative ground).
• Before final installation, temporarily connect the
wiring according to the diagram (inside), to
insure proper connectivity. Test the unit to verify
it is working correctly.
USER’S MANUAL
CAM25
REAR-VIEW CAMERA
REAR-VIEW CAMERA
BOSS Audio Systems
3451 Lunar Court • Oxnard, CA 93030
www.bossaudio.com | 805.751.4853
tech support: www.bossaudio.com/technical-support
0315
USER’S MANUAL
CAM25
CAM25
REAR VIEW CAMERA
Congratulations on your purchase of a BOSS
AUDIO SYSTEMS CAM25 Rear View Camera.
Thank you for making BOSS AUDIO SYSTEMS
your choice for mobile audio/video
entertainment.
SAFETY PRECAUTIONS
• Do not operate any mobile video equipment
while driving – safe driving should always be
your highest priority.
• Do not open or attempt to repair this unit
yourself. Refer any repairs to a qualified BOSS
AUDIO SYSTEMS technician.
• If there is smoke or any peculiar odor present
during use or if there is damage to any of the
component enclosures, immediately remove it
from your system and send to your local dealer
or service center as soon as possible.
User’s Manual
SPECIFICATIONS
Model No. CAM25
Image Device 1/4" (6.3mm) Color
Effective Pixels NTSC: 628 x 582
Signal System NTSC
Sensing Area 5.78mm x 4.19mm
Sync. System Internal
Resolution 420 TV Lines
Minimum Illumination 3Lux/F1.2 (O Lux when
Infrared LED on)
Lens 2.8mm/120deg
Night Vision Range 6m
S/N Ratio > 48db
Electronic Shutter 1/60 - 1/15,000 sec.
Video Output RCA Connector,
1.0vp-p, 75 Ohm
Current Consumption 130mA
Power Supply 12V DC
Operating Temperature -30º to 50º C
Storage Temperature -30º to 60º C
Other Items Automatic White
Balance, AGC and BLC
Dimensions: 1.1" x 1.6"
28mm x 42mm
TYPICAL SYSTEM CONFIGURATION
Video
Monitor
Power Input DC 12V
CAM25
Power Input
DC 12V
Video Output
Field of View - 92º
40mm
28mm


Produktspezifikationen

Marke: Boss
Kategorie: Auto Kit
Modell: CAM25

Brauchst du Hilfe?

Wenn Sie Hilfe mit Boss CAM25 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten