Bose T1 ToneMatch Bedienungsanleitung

Bose Mischer T1 ToneMatch

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Bose T1 ToneMatch (62 Seiten) in der Kategorie Mischer. Dieser Bedienungsanleitung war für 147 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/62

T1 ToneMatchTM

AUDIO ENGINE

Owner’s Guide

EnglishDeutschEspañolFrançaisItalianoNederlandsSvenska Dansk

QUICK PATH T M MO AKING USIC

To get sound right away

1. Remove your new T1 ToneMatchTM

audio engine from the carrying bag and

remove its protective cover (page 6).

2. Refer to the Quick Setup Guide and

connect your T1 to your L1TM system.

3. Make sure the T1 Master volume

control is set to 0 (page 16).

4. Turn on the T1 and then turn on your L1 model II system.

5. Plug your instrument or microphone into the Channel 1

input on the back of the T1 (page 4).

6. Play your instrument or sing into the microphone. Turn the

CH 1 Trim control clockwise until the input signal indica-

tor glows green (page 16).

7. Slowly turn the T1 Master volume control up until it is

approximately in the 12 o’clock position (page 16).

8. Slowly turn the CH 1 Vol control up until you hear your

instrument or microphone (page 16).

IMPORTANT!

Please make sure you read “Optimizing input gain and

output volume” on page 16. This explains how to prop-

erly adjust the input trim, channel volume, and master

volume controls for the best possible sound.

Master

Trim

(CH 1)

Vol (CH 1)

iii

SvenskaItalianoFrançaisEspañolDeutschDanskEnglish Nederlands

To shape your sound

1. ToneMatchTM engine: Select a preset designed for your

specific instrument or microphone (see “Selecting a Tone-

Match™ preset” on page 20).

2. zEQ: Adjust the low/mid/high-frequency bands specific to

the selected ToneMatch preset (see “Adjusting zEQ” on

page 21).

3. Para EQ: Fine-tune the equalization (see “Adjusting Para

EQ” on page 21).

4. Comp/Gate: Add some dynamics controls like compres-

sion, limiter, or a gate (see “Using compressor/gate func-

tions” on page 22).

5. Mod: Add a modulation effect like chorus or a flanger (see

“Using modulation effects” on page 24).

6. Delay: Add a delay (see “Adding delays” on page 25).

7. Reverb: Add some reverb (see “Adding reverb” on

page 26).

8. Reverb Type: Select a reverb type to affect all channels

(see “Selecting a type of reverb” on page 27).

9. Prefs: View the status display, which shows you the acti-

vated effects on each channel (see “Using the Prefs utili-

ties” on page 28).

10. If you like the sound that you have created, turn the T1

rotary selector to Scenes and save your settings as a new

scene. If you don’t like it, try loading one of the five Bose ®

scenes to use as a new starting point (see “Loading and

saving scenes” on page 32 and “Bose scenes” on

page 37).

The inside of this owner’s guide provides more informa-

tion on using these features and others not mentioned

here. To get the most out of your T1 ToneMatch audio

engine, please read this owner’s guide.

For additional help, visit www.Bose.com/musicians.

Rotate the T1 rotary selector to

choose a function.

Use the display information

and control buttons under the

display to change the settings

(see “Reading the T1 display”

on page 18).

Produktspezifikationen

Marke:	Bose
Kategorie:	Mischer
Modell:	T1 ToneMatch
USB Anschluss:	Ja
Breite:	165.5 mm
Tiefe:	208.9 mm
Gewicht:	970 g
Höhe:	67.6 mm
Anzahl Kanäle:	- Kanäle
Unterstützt Windows-Betriebssysteme:	Windows 2000, Windows 2000 Professional, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
Hintergrundbeleuchtung:	Ja
Audio D/A Konverter:	24
Farbe der Hintergrundbeleuchtung:	Blau
Digital sound Bearbeitung:	- Bit
Samplerate:	48 kHz