Bosch GWS18V-45CN Bedienungsanleitung
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Bosch GWS18V-45CN (64 Seiten) in der Kategorie Schleifer. Dieser Bedienungsanleitung war fĂĽr 30 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/64
IMPORTANT: IMPORTANT : IMPORTANTE:
Read Before Using Lire avant usage Leer antes de usar
Operating/Safety Instructions
Consignes de fonctionnement/sécurité
Instrucciones de funcionamiento y seguridad
For English Version Version française Versión en español
See page 2 Voir page 22 Ver la página 43
1-877-BOSCH99 (1-877-267-2499) www.boschtools.com
Call Toll Free for
Consumer Information
& Service Locations
Pour obtenir des informations
et les adresses de nos centres
de service après-vente,
appelez ce numéro gratuit
Llame gratis para
obtener informaciĂłn
para el consumidor y
ubicaciones de servicio
GWS18V-45C
GWS18V-45PC
GWS18V-45PSC
160992A3WF 08-18 GWS18V-45C.qxp_GWS 8/28/18 1:07 PM Page 1
-2-
Work area safety
Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
Electrical safety
Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric
shock.
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
When operating a power tool outdoors,
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
If operating a power tool in a damp location
is unavoidable, use a Ground Fault Circuit
Interrupter (GFCI) protected supply. Use of
an GFCI reduces the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention
while operating power tools may result in
serious personal injury.
Read all safety warnings and all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
General Power Tool Safety Warnings
Safety Symbols
The definitions below describe the level of severity for each signal word. Please read the manual
and pay attention to these symbols.
!
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
160992A3WF 08-18 GWS18V-45C.qxp_GWS 8/28/18 1:07 PM Page 2
-3-
Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the
switch is in the off-position before
connecting to power source and / or battery
pack, picking up or carrying the tool.
Carrying power tools with your finger on the
switch or energizing power tools that have the
switch on invites accidents.
Remove any adjusting key or wrench before
turning the power tool on. A wrench or a
key left attached to a rotating part of the power
tool may result in personal injury.
Do not overreach. Keep proper footing and
balance at all times. This enables better
control of the power tool in unexpected
situations.
Dress properly. Do not wear loose clothing
or jewelry. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewelry or long hair can be caught in
moving parts.
If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.
Power tool use and care
Do not force the power tool. Use the
correct power tool for your application. The
correct power tool will do the job better and
safer at the rate for which it was designed.
Do not use the power tool if the switch does
not turn it on and off. Any power tool that
cannot be controlled with the switch is
dangerous and must be repaired.
Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are
dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment
or binding of moving parts, breakage of
parts and any other condition that may
affect the power tool’s operation. If damaged,
have the power tool repaired before use.
Many accidents are caused by poorly
maintained power tools.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
Use the power tool, accessories and tool
bits etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situation.
Battery tool use and care
Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and
fire.
When battery pack is not in use, keep it
away from other metal objects like paper
clips, coins, keys, nails, screws, or other
small metal obj ects that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
Under abusive conditions, liquid may be
ejected from the battery, avoid contact. If
contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Service
Have your power tool serviced by a qualified
repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
160992A3WF 08-18 GWS18V-45C.qxp_GWS 8/28/18 1:07 PM Page 3
Produktspezifikationen
| Marke: | Bosch |
| Kategorie: | Schleifer |
| Modell: | GWS18V-45CN |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Bosch GWS18V-45CN benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schleifer Bosch
28 März 2024
24 März 2024
19 März 2024
23 Februar 2024
7 Dezember 2023
12 August 2023
9 August 2023
28 Juni 2023
13 Mai 2023
Bedienungsanleitung Schleifer
- Schleifer Cotech
- Schleifer Makita
- Schleifer Adler
- Schleifer Flex
- Schleifer Parkside
- Schleifer Vonroc
- Schleifer AEG
- Schleifer Gorenje
- Schleifer Powerfix
- Schleifer ECG
- Schleifer Black And Decker
- Schleifer Cocraft
- Schleifer FERM
- Schleifer Ryobi
- Schleifer Skil
- Schleifer Trotec
- Schleifer Eibenstock
- Schleifer Hilti
- Schleifer DeWalt
- Schleifer Einhell
- Schleifer Festool
- Schleifer Worx
- Schleifer Nuova Simonelli
- Schleifer Hikoki
- Schleifer Hitachi
- Schleifer Hazet
- Schleifer Kress
- Schleifer Metabo
- Schleifer Stanley
- Schleifer GĂĽde
- Schleifer Scheppach
- Schleifer Workzone
- Schleifer Meec Tools
- Schleifer Proxxon
- Schleifer Westfalia
- Schleifer Husqvarna
- Schleifer Chicago Pneumatic
- Schleifer Silverline
- Schleifer Sthor
- Schleifer Robust
- Schleifer Yato
- Schleifer Genesis
- Schleifer Mirka
- Schleifer Toolland
- Schleifer ABB
- Schleifer Milwaukee
- Schleifer Fein
- Schleifer Craftsman
- Schleifer Powerplus
- Schleifer Alpha Tools
- Schleifer Ozito
- Schleifer Kawasaki
- Schleifer Porter-Cable
- Schleifer Global
- Schleifer Steren
- Schleifer Victoria Arduino
- Schleifer Einhell Bavaria
- Schleifer Urrea
- Schleifer Ergotools Pattfield
- Schleifer Bavaria By Einhell
- Schleifer Classic Power
- Schleifer SW-Stahl
Neueste Bedienungsanleitung fĂĽr -Kategorien-
26 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
25 Juni 2024
24 Juni 2024