Bosch B810 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Bosch B810 (3 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/3
Intrusion Alarm Systems | B810 Wireless SDI2 bus interface
B810 Wireless SDI2 bus interface
www.boschsecurity.com
uDual internal antennas provide spatial and polar RF
signal reception for high reliability
uCover and wall tamper protection
uMultiple device enrollment options as well as RF
diagnostics ensure efficient and effective installation
uSupports supervision of wireless points (504),
keyfobs (1000), and repeaters (8)
uExternal status LEDs
RADION wireless from Bosch provides the range,
scalability and exceptional battery life required to
ensure reliable performance and superior quality.
Advanced diagnostics and multiple device enrollment
options make installation and maintenance simple and
cost effective. With a complete line of peripherals,
RADION provides the flexibility for virtually any
application requirement.
System overview
The B810 is a wireless receiver that connects RADION
wireless peripherals such as the motion and specialty
detectors, keyfobs, panic buttons, door window
contacts, repeaters, and more, to supported Bosch
control panels using the SDI2 Bus connection.
The receiver supports RF communication at 433.42
MHz This frequency features improved penetration,
reflection, and refraction of signal for superior range,
and reliability. The receiver also features dual
antennas to achieve spatial and polar diversity to
further improve RF communication reliability. Enclosed
within the receiver housing for higher security, the
receiver is equipped with tamper protection, and
detects and reports radio frequency interferences. The
receiver supports supervision of wireless points (504),
key fobs (1000), and repeaters (8).
The receiver can be easily accessed and configured for
a compatible control panel using the address switch
on the back of the receiver housing. The receiver
address switch provides a single-digit setting for the
receiver’s address, allowing for ease of installation.
Functions
The receiver uses the RADION wireless protocol which
supports:
• SDI2 bus communication
• Tamper input processing
• RF interference (jamming) detection and reporting
• Signal strength and margin reporting
• Enroll Device Database management
Address switch addressing
Use the address switch to easily assign a bus address
or setup during installation.
Easy installation
The sliding self-locking enclosure has an integrated
bubble level and a custom gap-free, lift gate style
terminal block to make installation easier, faster, and
more reliable.
LED display
The LED provides status and troubleshooting
information about the receiver and its connection.
RF interference (jamming) detection and reporting
The receiver detects and reports interference jamming
when the ambient noise level is above jamming
thresholds for a continuous period of 20 seconds.
Communications
RF packet information is received through the use of
two spatial and polar diversity antennas. The receiver
then transmits a 4-bit sequence of information back to
the control panel for status changes.
Wall and cover tamper switch
The receiver transmits a tamper signal when someone
removes the device from it’s base, or pulls it away
from the wall.
Certifications and approvals
Region Regulatory compliance/quality marks
Australia RCM [B810]
USA ANSI-
SIA
CP-01-2010-Control Panel Standard -
Features for False Alarm Reduction
Europe CE EMC, LVD, R&TTE, RoHS [B810]
USA UL [B810, RFRP-A]
UL UL 1023 - Household Burglar Alarm Sys-
tem Units
UL UL 1076 - Proprietary Burglar Alarm
Units and Systems
UL UL 1610 - Central Station Burglar Alarm
Units
UL UL 365 - Police Station Connected Bur-
glar Alarm Units
UL UL 609 - Standard for Local Burglar
Alarm Units and Systems
UL UL 636 - Holdup Alarm Units and Sys-
tems
UL UL 985 - Household Fire Warning Sys-
tem Units (6th edition)
CSFM California State Fire Marshal
FCC Part 15 Class B
Installation/configuration notes
Mounting considerations
You can mount the wireless receiver in residential,
commercial or industrial locations in which a
compatible control panel is already installed. The
installation of the wireless receiver should be at a
distance no greater than 243 m (800 ft) from the
control panel.
Wiring considerations
The wireless receiver connects to a control panel using
the SDI2 connections (PWR, A, B, COM). Use
appropriate gauge wires from the receiver to the
control panel when connecting the wiring to the
terminal block of the receiver.
Compatibility
B9512G/B8512G
B6512/B5512/B4512/B3512
GV4 Series (D9412GV4, D7412GV4 v2.xx or higher)
control panels
RFDL-11-A/RFDL-11 motion detector
RFDW-SM-A/RFDW-SM standard door/window contact
RFDW-RM-A/RRDW-RM recessed door/window contact
RFRP-A/RFRP repeater
RFPR-12-A/RFPR-12 motion detector
RFPR-C12-A/RFPR-C12 motion detector (curtain)
RFUN-A/RFUN universal transmitter
RFKF-FB-A /RFKF-FBS-A/RFKF-FB/RFKF-FBS 4-button
keyfob
RFKF-TB-A /RFKF-TBS-A/RFKF-TB/RFKF-TBS 2-button
keyfob
RFPB-TB-A/RFPB-TB 2-button panic
RFPB-SB-A/RFPB-SB single button panic
RFGB-A/RFGB glass break
RFSM-A/RFSM smoke detector
Parts included
Quantity Component
1 Wireless receiver
1 Hardware pack
1 Installation guide
Technical specifications
Properties
Dimensions 139.70 mm x 209.60 mm x 31.80 mm
(5.50 in x 8.25 in x 1.25 in)
Wiring distance 243 m (800 ft)
Wiring gauge 0.65 mm (22 AWG) to 2.0 mm (18 AWG)
Tamper detection Transmits a tamper switch signal when
the unit is removed from its base, or the
mounting surface.
Power
Power/voltage 10-14 VDC, 12 VDC nominal
Maximum current draw 70 mA
Frequency 433.42 MHz
2 | B810 Wireless SDI2 bus interface
Environmental Considerations
Operating Environment 0 C to +49 C (+32 F to +120 F )゚ ゚ ゚ ゚
Relative humidity Up to 93% non-condensing
Use Intended for indoor use.
Ordering information
B810 Wireless SDI2 bus interface
Receives RF signals from RADION transmitters,
repeaters, and glassbreaks. Operates at 433.42 MHz.
For use with compatible SDI2 bus control panels.
Order number B810
3 | B810 Wireless SDI2 bus interface
Represented by:
Europe, Middle East, Africa: Germany: North America: Asia-Pacific:
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: + 31 40 2577 284
emea.securitysystems@bosch.com
emea.boschsecurity.com
Bosch Sicherheitssysteme GmbH
Robert-Bosch-Ring 5
85630 Grasbrunn
Germany
www.boschsecurity.com
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180
onlinehelp@us.bosch.com
www.boschsecurity.us
Robert Bosch (SEA) Pte Ltd, Security Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6571 2808
Fax: +65 6571 2699
apr.securitysystems@bosch.com
www.boschsecurity.asia
© Bosch Security Systems 2020 | Data subject to change without notice
7242869131 | en, V26, 29. Jun 2020


Produktspezifikationen

Marke: Bosch
Kategorie: Nicht kategorisiert
Modell: B810

Brauchst du Hilfe?

Wenn Sie Hilfe mit Bosch B810 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Bosch

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-