Bogen V100 Bedienungsanleitung

Bogen Mischer V100

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Bogen V100 (34 Seiten) in der Kategorie Mischer. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/34

Power Vector Amplifiers

V35, V60, V100, V150, & V250 Models

Installation and Use Manual

Specifications subject to change without notice.

54-2072-01C 1202

Notice

Every effort was made to ensure that the information in this

guide was complete and accurate at the time of printing.

However, information is subject to change.

Important Safety Information

WARNING: To Reduce The Risk of Fire Or Electric Shock, Do

Not Expose This Apparatus To Rain Or Moisture.

Always follow these basic safety precautions when installing and

using the unit:

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. DO NOT block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers)

that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding-type plug has two

blades and a third grounding prong. The wide blade, or the

third prong, are provided for your safety. If the provided plug

does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched,

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12. Unplug this apparatus during lightning storms or when

unused for long periods of time.

13. Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as power supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

IMPORTANT

C A U T I O N : TO P R E V E NT T H E R I S K O F

ELECTRIC SHOCK, DO NOT REMOVE COVER

(OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED

PERSONNEL.

The lightning flash with arrowhead

symbol, within an equilateral triangle, is

intended to alert the user to the

presence of uninsulated “dangerous

voltage” within the product’s enclosure

that may be of sufficient magnitude to

constitute a risk of electric shock to

persons.

The exclamation point within an

equilateral triangle is intended to alert

the user to the presence of important

operating and maintenance (servicing)

instructions in the literature

accompanying the appliance.

Contents

Page

PANEL DESCRIPTIONS..................................................................................................2-3

Power Vector Front Panel..................................................................................................................2

Power Vector Rear Panel ..................................................................................................................3

INSTALLATION ..................................................................................................................4

Package Contents ................................................................................................................................4

Ventilation and Mounting ..................................................................................................................4

Models V250 and V150 ................................................................................................................4

Models V 00, V60, and V351..........................................................................................................4

Rack Mounting ..............................................................................................................................4

Shelf/Table Mounting ....................................................................................................................4

Module Installation ..............................................................................................................................4

MODULES ............................................................................................................................5

Output Modules ..................................................................................................................................5

Functionality ....................................................................................................................................5

Input Modules ......................................................................................................................................5

Functionality ....................................................................................................................................5

Priorities ..........................................................................................................................................5

CONNECTIONS ..............................................................................................................6-8

Speakers ................................................................................................................................................6

Transformer-Coupled Speaker Connections ................................................................................6

4-Ohm Low-Impedance Speaker Connections ............................................................................6

COM and GND Terminals ............................................................................................................7

Remote Volume Control ....................................................................................................................7

Pre-EQ Output ....................................................................................................................................7

Signal-Processing Inserts ....................................................................................................................7

Mute Control........................................................................................................................................8

Bridging ..................................................................................................................................................8

System Expansion of Power Vector Amplifiers ............................................................................8

OPERATION ..................................................................................................................9- 01

Front Panel Controls & Indicators ..................................................................................................9

Input Volume Controls ....................................................................................................................9

Signal / Clip Indicator ....................................................................................................................9

Base and Treble Controls ..............................................................................................................9

Master Volume Control ..................................................................................................................9

Average / Peak Switch & LED Output Meter ............................................................................9

Power Switch / Power Indicator ....................................................................................................9

Rear Panel Controls ........................................................................................................................ 01

Load Selector Switch .................................................................................................................. 01

Other Controls ................................................................................................................................ 01

Tone Control Bypass Switch........................................................................................................ 01

Low-Cut Switch ............................................................................................................................ 01

BLOCK DIAGRAM ............................................................................................................11

SPECIFICATIONS ............................................................................................................12

TROUBLESHOOTING .................................................................................................... 31

LIMITED WARRANTY ......................................................................................Back Cover

ACCESSORIES ..................................................................................................Back Cover

Produktspezifikationen

Marke:	Bogen
Kategorie:	Mischer
Modell:	V100
Breite:	438.15 mm
Tiefe:	374.65 mm
Gewicht:	12700 g
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabelgebunden
Höhe:	98.42 mm
Zweck:	Haus
RMS-Leistung:	100 W
AC Eingangsspannung:	120 V
AC Eingangsfrequenz:	60 Hz
LED-Anzeigen:	Ja
Audio Kanäle:	- Kanäle
THD, totalklirren:	0.1 %
Rauschverhältnis (SNR):	-94 dB
Frequenzbereich:	20 - 20000 Hz
Ein-/Ausschalter:	Ja
Eingang Empfindlichkeit:	400 mV
Stromstärke (maximal):	2 A
Leistungshöhepunkt pro Kanal:	- W
Rack-Kapazität:	2U
Output Widerstand:	4 Ohm