Bogen MB8TSQ Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Bogen MB8TSQ (2 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 28 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Installation Instructions
1. Determine where the speaker(s) will be mounted. Ensure power is not connected to speaker wires prior to installation.
Follow all local safety and building codes and route speaker wires to desired wall or ceiling location. Pull approximately
12" of wire through opening in mounting surface.
2. Pull speaker wire through the back of the large opening of the speaker enclosure. Using the supplied mounting hardware,
secure the enclosure to the mounting surface. Note that two toggle bolts (for sheet rock surfaces) and two wood screws
(for securing to solid wood/beams) have been included. Utilize the two washers (supplied) as shown in Figure 1 with either
toggle bolts, wood screws, or other user supplied hardware.
MB8TSL, MB8TSQ, MB8TSLVR, MB8TSQVR
70V/25V Metal Box Speakers
For Surface Mounting to Walls and Ceilings
© 2005 Bogen Communications, Inc.
Specifications subject to change without notice.
54-2135-01C 0809
Use two of the enclosure’s mounting
holes as a template (diagonally
opposed), and mark screw hole
locations. If toggle bolts will be
used, drill two, 1/2" diameter holes
in the mounting surface, otherwise
drill a hole appropriate for hardware
being used.
Figure 1 - Sheet rocked ceiling mount example
Package Contents:
• Back box enclosure
• Grille with speaker assembly
• Two crimp-type connectors
• Two toggle bolts
• Two wood screws
• Two washers
• Four 1" screws for attaching
grille assembly
Ceiling
Toggle bolts
(for sheet rock)
Enclosure
mounting holes
Wiremold®
Knockouts
3. Attach the speaker wires to the appropriate transformer tap
wires (See Figure 2 and chart below).
Connect the desired power tap wire (use supplied crimp-
type connector) to the (+) side of the paging system.
Connect the (-) side of the paging system (use supplied
crimp-type connector) to the black common lead.
The speaker will also work perfectly well with these
connections reversed. However, it is important to be consis-
tent in the wiring of the speakers in the system. If adjacent
speakers have reversed wiring connections, they will tend
to cancel each other’s bass response, diminishing the
sound quality.
4. Individually clip each tip of exposed wire on the unused
power taps and place them neatly around the speaker
housing. This will ensure that unused tap leads will not
cause shorting problems.
5. Secure the speaker/faceplate assembly to the mounted
enclosure. Use four 1" screws (included). See Figure 3.
6. Speaker volume can be attenuated via front panel
recessed volume control (VR versions only).
www.bogen.com
The MB8TSL, MB8TSQ, MB8TSLVR, and MB8TSQVR are warranted to be free from defects in material or workmanship for two (2) years from the date of sale to the original
purchaser. Any part of the product covered by this warranty that, with normal installation and use, becomes defective will be repaired or replaced by Bogen, at our option,
provided the product is shipped insured and prepaid to: Bogen Factory Service Department, 50 Spring Street, Ramsey, NJ 07446, USA. The product will be returned to you
freight prepaid. This warranty does not extend to any of our products that have been subjected to abuse, misuse, improper storage, neglect, accident, improper installation or
have been modified or repaired or altered in any manner whatsoever, or where the serial number or date code has been removed or defaced.
THE FOREGOING LIMITED WARRANTY IS BOGEN'S SOLE AND EXCLUSIVE WARRANTY AND THE PURCHASER'S SOLE AND EXCLUSIVE
REMEDY. BOGEN MAKES NO OTHER WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MER-
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED AND EXCLUDED TO THE MAXIMUM EXTENT
ALLOWABLE BY LAW. Bogen's liability arising out of the manufacture, sale or supplying of products or their use or disposition, whether based upon warranty, contract,
tort or otherwise, shall be limited to the price of the product. IN NO EVENT SHALL BOGEN BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, LOSS OF DATA OR LOSS OF USE DAMAGES) ARISING OUT OF THE MANUFACTURE, SALE OR SUPPLY-
ING OF PRODUCTS, EVEN IF BOGEN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSSES. Some States do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other
rights which vary from State to State.
Products that are out of warranty will also be repaired by the Bogen Factory Service Department -- same address as above or call 20 -934-8500. The parts and labor involved1
in these repairs are warranted for 90 days when repaired by the Bogen Factory Service Department. All shipping charges in addition to parts and labor charges will be at the
owner's expense. All returns require a Return Authorization number.
7/ /200822
Limited Warranty; Exclusion of Certain Damages
BLACK COMMON
BROWN DO 4W
RED NOT 2W
ORANGE USE 1W
YELLOW 4W 1/2W
GREEN 2W 1/4W
BLUE 1W 1/8W
VIOLET 1/2W –
GREY 1/4W –
WHITE 1/8W –
Figure 2
Use
crimp-type
connectors
(included)
Grille with
speaker assembly
Back box
enclosure
Figure 3
70V 25V
Volume control
(VR versions)
•
Wiremold®
Knockouts
Wiremold®is a Registered Trademark of Wiremold/Legrand


Produktspezifikationen

Marke: Bogen
Kategorie: Lautsprecher
Modell: MB8TSQ

Brauchst du Hilfe?

Wenn Sie Hilfe mit Bogen MB8TSQ benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher Bogen

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-