Blustream HEX11WP-TX Bedienungsanleitung

Blustream Audio-/Video-Extender HEX11WP-TX

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Blustream HEX11WP-TX (4 Seiten) in der Kategorie Audio-/Video-Extender. Dieser Bedienungsanleitung war für 27 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

HEX11WP-TX QUICK REFERENCE GUIDE

contact: support@blustream.co.uk / support@blustream.com.au

HEX11WP-TX

Quick Reference Guide

Our HEX11WP HDMI wall plate HDBaseT™ Transmitter is a 4K solution that extends

HDMI up to 70m at 1080p (40m at 4K 60Hz 4:2:0). The HEX11WP-TX has been

designed to work with all Blustream HDBaseT™ Receiver and Matrix solutions, be

installed in both UK and European backboxes and can be powered locally or from

compatible Blustream HDBaseT™ products.

Introduction

FEATURES:

• Advanced HDBaseT™ technology oering distribution of video and audio over a single CAT cable

• Supports 4K UHD video up to 40m (3840 x 2160 @30Hz 4:4:4, 4096 x 2160 @24Hz 4:4:4, and 4K @60Hz 4:2:0)

• Extends HDMI at 1080p up to a distance of 70m

• Supports all known HDMI audio formats including Dolby TrueHD, Dolby Atmos, Dolby Digital Plus and DTS-HD

Master Audio transmission

• Supports 12V-48V PoC from compatible Blustream HDBaseT™ Receiver / Matrix products

• Bi-directional RS-232 pass through

• Supports IR pass-through to HDBaseT™ device

• Compatible with all Blustream HDBaseT™ Receiver / Matrix products*

• Magnetic faceplate surround allowing both UK & EU backbox compatibility

• HDCP 2.2 support

*Technical performance is subject to the features supported on the connected HDBaseT™ device

HEX11WP-TX QUICK REFERENCE GUIDE

www.blustream.com.au / www.blustream.co.uk

Front Panel Description

1 Power status indicator - Illuminates when powered

2 HDBaseT™ link status indicator - Illuminates when the Transmitter is connected to a HDBaseT™ Receiver / Matrix

product successfully

3 IR Receiver - Built in IR sensor for IR passthrough

4 HDMI input - Type A HDMI port to connect HDMI source

5 HDBaseT™ output - RJ45 HDBaseT™ port to connect to the input port of the compatible Blustream HDBaseT™

HDBaseT™ Receiver / Matrix device

6 12V DC input - 2-pin phoenix connector to connect to Blustream 12V power supply (supplied)

7 IR Receiver Input - 3-pin phoenix connector to connect to Blustream IR Receiver (not supplied)

8 RS-232 - 3-pin phoenix connector for RS-232 passthrough to / from compatible Blustream HDBaseT™ device

1 2 3 4

6 7 85

Rear Panel Description

EDID Management

Please note this unit does not feature EDID management. As HDBaseT is limited to 10.2Gbps video signals, please

make sure your source device only outputs a HDMI signal within this bandwidth. A video signal beyond 10.2Gbps of

bandwidth will not be passed through this device resulting in a blank screen.

HEX11WP-TX QUICK REFERENCE GUIDE

contact: support@blustream.co.uk / support@blustream.com.au 03

Example Schematic

Produktspezifikationen

Marke:	Blustream
Kategorie:	Audio-/Video-Extender
Modell:	HEX11WP-TX
Breite:	146 mm
Tiefe:	86 mm
Produktfarbe:	Edelstahl
Übertragungstechnik:	Kabelgebunden
Höhe:	6 mm
Material:	Metall
Paketgewicht:	2100 g
Zertifizierung:	RoHS, CE, FCC
Typ:	AV-Sender
Menge pro Packung:	1 Stück(e)
Betriebsanleitung:	Ja
Montageset:	Ja
HDCP:	Ja
Maximale Bildwiederholrate:	60 Hz
Maximale Auflösung:	4096 x 2160 Pixel
Anzahl der HDMI-Ausgänge:	1
Maximal mögliche Übertragungsstrecke:	70 m
HDMI-In:	1
RS-232 Ausgangs-Ports:	1
Fernbedienung (IR) input:	1
Consumer Electronics Control (CEC) Unterstützung:	Ja
Transmitter-Abmessungen (BxTxH):	36 x 76 x 44 mm
HDCP-Durchschleifung:	Ja
IR-Durchgang (Pass Through):	Ja
RS-232-Durchschleifung:	Ja
CEC-Durchführung:	Ja