Bluesound NODE 2 Bedienungsanleitung

Bluesound Media Player NODE 2

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Bluesound NODE 2 (4 Seiten) in der Kategorie Media Player. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

Wireless Streaming

Music Player

Owner’s Manual

Included Accessessories

Welcome to Bluesound, Hi-Fi for the Wi-Fi generation.

Bluesound transforms your local digital music library by putting the music of your life right at your ﬁngertips.

The clutter of CDs is relegated to a previous era! Your smartphone, desktop or tablet running the Bluesound

App now controls your music.

Your Bluesound music system is also a sophisticated Internet streaming device that allows you to listen

to a wide range of Internet music service providers. Bluesound also provides access to music subscription

services featuring extensive catalogs of millions of songs streamed to you over the internet in real time.

TuneIn Radio makes every radio station in the world a local station via the magic of the internet.

To take full advantage of all these Bluesound capabilities requires a robust wired or wireless home network

and a reliable high speed Internet connection, provided by a DSL or Cable modem. Internet access must be

contracted and installed by your local Internet Service Provider. For remote areas there are satellite options

for high speed internet access.

Before signing on to a music subscription or cloud service we suggest that you review your Internet service

plan and be sure you have enough internet speed and bandwidth to provide uninterrupted streaming. Most

internet service providers offer multiple plans and can help you make the best choice.

For detailed instructions on how to control your Bluesound player, visit our website at : www.bluesound.com.

Stereo RCA to RCA Cable 230V AC Power Cord

3.5mm Stereo mini Plug to RCA Cable Ethernet Cable

120V AC Power Cord Mini Jack to Toslink Adaptor

STATUS INDICATOR

Below is a table of the LED blink codes and their corresponding descriptions.

LED BLINK CODE DESCRIPTION

Short blue ﬂash, then red Powering up, rebooting the unit

Solid green Hotspot Mode

Flashing green Connecting to Network shares

Solid red Cannot boot; drive error

Red pulse No internet gateway

White pulse Software update available

Solid red Upgrade mode

Alternate ﬂashing red and green Upgrading…

Flashing blue Mute mode

Solid white Indexing

Solid blue Connected to Network – ready to use with Bluesound App

Flashing red Factory reset in progress

5 6 7 8 13 14

109 12 1511

PLAY/PAUSE BUTTON : This button has multiple functions – a visual indicator of network connectivity and a PLAY/

PAUSE button. For a full listing of LED Blink Codes, please see #1 – Blink Codes. For an ungrouped Player, press

the button to Play and Pause the stream. If listening to an internet radio stream, the Pause function will work for 30

seconds. At this point, the buffer is full and the stream will Stop. When a Player is grouped, pressing the PLAY/PAUSE

button will Mute that Player while other Players continue the stream. The Player’s LED will ﬂash blue when muted.

+, - (VOLUME) : Toggle either button to vary volume level. Volume level will not change if you press and hold either button.

(+) : Increase volume level

(-) : Decrease volume level

PREVIOUS TRACK/NEXT TRACK : These buttons can be used to go back to the previous track or skip to the ◄◄

next track in your current playlist. ►►

AUDIO OUT : Connect to the corresponding analog audio input of an ampliﬁer, receiver or stereo system.

SUBW (SUBWOOFER) OUT : A Subwoofer can also be connected directly to the NODE 2. Connect SUBW OUT

to a powered (“active”) subwoofer.

COAX OUT : Using a coax cable (not provided), connect one end to the COAX OUT of the NODE 2 and the

other end to the corresponding coax input of compatible devices such as receivers, computer soundcards or

other digital processors.

OPTICAL OUT : Using a Digital Optical cable (not provided), connect one end to the OPTICAL OUT of the

NODE 2 and the other end to the corresponding digital audio input of compatible devices such as receivers,

computer soundcards or other digital processors.

OPTICAL IN/ANALOG IN : Using a 3.5mm Stereo Audio Cable (provided), connect one end to the Analog In

of the NODE 2 and the other end to the corresponding analog output of other compatible devices. The source

will show as an Analog Input in the Navigation Drawer of the Bluesound app. Using the 3.5mm Mini Jack to

Toslink adaptor (included with the NODE 2), a digital optical source can also be added. This will appear as Optical

Input in the Navigation Drawer.

TRIGGER OUT : A 12V DC signal is available using TRIGGER OUT. The 12V DC signal can be used to control or

activate other external devices equipped with a corresponding 12V trigger input using a 3.5mm mono audio cable.

IR IN : An infrared extender can be connected to allow for programmable learning remotes to control volume and

source selection when a NODE 2 is stored in a way that the front panel IR sensor is not visible.

LAN PORT : The LAN PORT connection can be used with the Ethernet cable provided. This is an optional

connection since the NODE 2 can be connected to the network through a Wi-Fi connection to your router. To

setup the NODE 2 using the LAN Port a Wired Ethernet connection is required. Using the Ethernet cable provided,

connect one end of the Ethernet cable to the LAN port of your wired Ethernet broadband router and the other end

to the NODE 2’s LAN port.

USB (TYPE A) : Connect a USB mass storage device to the USB input. Typical USB mass storage devices compatible

with the NODE 2 include portable ﬂash memory devices and external hard drives (FAT32 formatted).

SERVICE : Use the SERVICE port in conjunction with USB (Type B Mini) to initially load ﬁrmware on the Player.

This is not for consumer use. Only Authorized Bluesound Service personnel can access this USB port and

SERVICE control button.

AC MAINS INPUT : The NODE 2 comes supplied with two separate AC power cords. Select the AC power cord

appropriate for your region. Before connecting the plug to the wall outlet, connect ﬁrmly the other end of the AC

power cord to NODE 2’s AC Mains input socket. Never force the plug into a wall outlet. An adaptor may be necessary

in certain regions. Always disconnect the plug from the wall outlet ﬁrst, before disconnecting the cable from the

NODE 2’s AC Mains input socket.

FRONT PANEL HEADPHONE JACK : A 3.5mm headphone jack is located on the front of the NODE 2.

Produktspezifikationen

Marke:	Bluesound
Kategorie:	Media Player
Modell:	NODE 2
Prozessortaktfrequenz:	1 MHz
Unterstützte Audioformate:	AAC, AIFF, ALAC, FLAC, MP3, OGG, WAV, WMA
WLAN:	Ja
WLAN-Standards:	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth:	Ja
Breite:	220 mm
Tiefe:	46 mm
Gewicht:	1120 g
Mitgelieferte Kabel:	AC, LAN (RJ-45), RCA, TOSLINK Digital Optical
Produktfarbe:	Weiß
Höhe:	146 mm
AC Eingangsspannung:	100-240 V
Eingebautes Display:	Nein
Kopfhörerausgänge:	1
Anzahl USB 2.0 Anschlüsse:	2
Internet-Radio:	Ja
Internetradio Services unterstützt:	iHeartRadio
Lautstärkeregler:	Digital
Betriebstemperatur:	0 - 40 °C
Eingebauter Ethernet-Anschluss:	Ja
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Ethernet LAN Datentransferraten:	10,100,1000 Mbit/s
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-10 - 50 °C
Luftfeuchtigkeit bei Lagerung:	20 - 80 %
Audio Kanäle:	- Kanäle
THD, totalklirren:	0.005 %
Digital Audio-Ausgang (koaxial):	1
Audio (L,R) Out:	1
HDCP:	Nein
Optischer Audio-Digitalausgang:	1
Unterstützte Videoformate:	Nicht unterstützt
Unterstützte Bildformate:	JPG
Rauschverhältnis (SNR):	110 dB
Full-HD:	Nein
Integrierter Kartenleser:	Nein
Eingebauter Prozessor:	Ja
Gesamtspeicherkapazität:	0 GB
Prozessor Architektur:	Cortex-A9
Speichermedien Typ:	Nicht verfügbar
Eingebaute Speichermedien:	Nein
aptX-Technologie:	Ja