Blomberg GIN 9262 X Bedienungsanleitung


Lesen Sie kostenlos die šŸ“– deutsche Bedienungsanleitung fĆ¼r Blomberg GIN 9262 X (2 Seiten) in der Kategorie SpĆ¼lmaschine. Dieser Bedienungsanleitung war fĆ¼r 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
QUICK REFERENCE GUIDE EN
Programme Table
Programme number 1 2 Reference* 3 4 5
Programme name
Cleaning temperature
Degree of Soiling Suitable for removing the
remnants on the soiled
dishes that will be kept
waiting in the machine for
a few days, and thus, for
preventing the bad odor
buildup.
Most economical washing
program for the medium soiled
daily dishes that are kept waiting.
Daily washing program at which
the medium soiled dishes that are
kept waiting are cleaned in the
fastest way.
Suitable for heavily soiled dishes,
pots and pans.
Determines the soiling degree of the
dishes and sets the temperature and
amount of the washing water as well
as the washing time automatically.
Suitable for all types of dishes.
- Medium Medium High Medium to high
Detergents
A=25 cmĀ³/15 cmĀ³ B=5 cmĀ³ - A+B A+B A+B A
Programme sequence
(without options)
Pre-wash
ā–¼
End
Pre-wash
ā–¼
Wash
ā–¼
Cold rinse
ā–¼
Hot Rinse
ā–¼
Dry
ā–¼
End
Wash
ā–¼
Cold rinse
ā–¼
Hot Rinse
ā–¼
Dry
ā–¼
End
Pre-wash
ā–¼
Wash
ā–¼
Cold rinse
ā–¼
Hot Rinse
ā–¼
Dry
ā–¼
End
The programme sequence is
adjusted to the amount of soiling
Duration (min) 15 155 58 136 78-156
Water (I) 4 13 10,2 14,8 10,4-14,0
Energy (kWh) - 1,09 1,24 1,45 0,90-1,45
Left-on mode / Off mode (W) *** 0.48 / 0.05
The consumption values shown in the table were determined under standard conditions. Differences may therefore occur under practical conditions.
* Reference programme for testing institutes The tests in accordance with EN 50242 must be carried out with a full water softener salt dispenser and a full rinse aid reservoir, and using the test programme.
*** Power consumption in off-mode and left-on mode are measured according to EN 62301.
How to use your dishwasher:
ā€¢ī€€ Open the water tap.
ā€¢ī€€ Plug to the mains.
ā€¢ī€€ Open the door and load the dishwasher. Check if both upper
and lower spray arms move freely.
ā€¢ī€€ Fill enough detergent into the detergent dispenser and close
the door.
ā€¢ī€€ Use the on / off button to turn the machine on.
ā€¢ī€€ Check the salt and rinse aid level indicator lights. If necessary,
refill salt and/or rinse aid.
ā€¢ī€€ Use the programme selection button to choose your washing
programme.
ā€¢ī€€ When there are few dishes, additionally use the Half Load
button.
ā€¢ī€€ Start the programme with the Start/Pause button:
Attention
Avoid opening the door during the washing process. This interrupts
the washing process, and hot steam will escape. When the door is
closed, the programme will continue.
ā€¢ī€€ Use the on / off button to turn the machine off again. When
the progress indicator light ā€œprogramme endā€ lights up, the
programme is complete.
ā€¢ī€€ Close the water tap. Pull out the plug.
ā€¢ī€€ Allow your dishes to cool for 15 minutes, with the door open.
Unload the dishes. Begin with the lower basket.
! Attention:Please read the operating manual prior to operating the machine for the first time.
50Ā°C 70Ā°C 40Ā°C - 65Ā°C
Pre-wash Economy Intensive Auto
Rinse aid level indicator light
Salt level indicator light
LED progress indicator lights
Programme indicator lights
1
2
3
4
5
Start/Cancel button
6
7
Programme selection button
8
9
10 On/Off button
A Express 58'
60Ā°C-
Time Delay indicator lights
Time Delay button
Demi-Chargement (1/2)
QUICK REFERENCE GUIDE EN
Start/cancel button
You use this button to start the selected program; the light on the
button lights up.
Stop the program with the start/cancel button if you would like to
open the door once the dishwasherā€™s washing program is running.
LED progress indicator lights
The program sequence throughout the
washing process can be monitored from the
progress indicator lights on the control panel.
Warning!
Following the washing stage, in order to drain
and remove water from inside the machine completely, the machine
will pause for approximately 35 minutes. Do not worry this is not a
fault. Then End progress indicator light will come on.
Warning!
Do not switch the machine off before End light comes on.
How to cancel the washing program
Press start/cancel button for 3 seconds. The indicator light will start
flashing. The machine will drain the water inside the machine for
45 seconds. The programme is cancelled when start/stop indicator
light goes off. Then, you can choose and start a new programme.
Important:!
Depending on the stage of the program you have cancelled, there
may be detergent residue or rinse aid inside the machine and
on the load. Make sure the items in the dishwasher are not used
before washing properly.
How to change the washing programme
To change a running programme, press the start/cancel button: The
programme light turns off.
Select a new programme and start it with the start/cancel button:
The respective programme light lights up.
Important:!
The new program will NOT start right from the beginning. It will start
from the stage last carried out by the previous program selection.
On/off button
You turn your dishwasher on / off with this button. When turning on,
the indicator light for the last used programme will light up.
Salt level indicator light
When this indicator light comes on, you must
refill special salt (If applicable).
In machines which do not possess an electrical
salt indicator, the salt content can be read on
the container for the salt. When the visual fill
indicator is dark, there is enough salt in the
container.
When the colour is light, open the container and add dishwasher
salt.
Rinse aid level indicator light
If this indicator light comes on, you have to refill
rinse aid (If applicable).
You can also tell whether rinse aid must be
refilled by looking at the rinse aid dispenser.
When the visual fill indicator is dark, there is
enough rinse aid in the dispenser.
When the colour is light, open the dispenser and
refill rinse aid.
Program selection button
Use the programme selection button to select the desired
programme. The corresponding programme light lights up.
Improper Loading Of Dishware
17 7785 01 00_AB
ī”
ī‚
ī
ī›
ī•
ī–
ī›
ī”
ī‚
ī
ī•
ī”
ī†
ī
Visual Indicator
Visual Indicator
Wash
Rinse
Dry
End
Rinse aid level indicator light
Salt level indicator light
LED progress indicator lights
Programme indicator lights
1
2
3
4
5
Start/Cancel button
6
Programme selection button
7
8
9
10 On/Off button
Time Delay indicator lights
Time Delay button
Time delay
With the delay function of your machine, you may delay the starting
time of the program up to 3-6-9 hours using the Time delay button.
3-6-9 hour lamps will start flashing respectively, each time you
press the delay button. If you press the Start/Cancel button while
the desired delay lamp is flashing, then the delay lamp comes
on constantly and the function is saved to the memory. As of this
moment, the countdown starts. Upon completion of the delay
period, the delay lamp will go off and the selected washing program
will start.
If you press the Delay Button when the 9 hours delay lamp is
flashing, then the delay lamps goes off. If you press the Start/
Cancel button when the Delay Lamps are not lit, then the selected
program will start without any delay.
You may follow the remaining delay period from the delay lamps.
For example: If you select the 9 hours delay option, then the 6
hours lamp will come on when there is 6 hours remaining to the
start of washing program and 3 hours lamp will come on when there
is 3 hours remaining.
Changing the delay period
Press Start/Cancel button. The Delay period lamp will start flashing.
You may choose the new delay time by pressing the delay button
again.
Press Start/Cancel button again to save the setting.
Touche Demi-Charge (1/2)
Si vous avez peu de vaisselle Ć  laver, appuyez sur cette touche
aprĆØs avoir appuyĆ© sur le sĆ©lecteur de programme. En mettant le
lave-vaisselle en marche, le voyant sur la touche s'allume. Cette
fonction aide Ć  Ć©conomiser de l'eau et de l'Ć©nergie.
Demi-Chargement (1/2)


Produktspezifikationen

Marke: Blomberg
Kategorie: SpĆ¼lmaschine
Modell: GIN 9262 X

Brauchst du Hilfe?

Wenn Sie Hilfe mit Blomberg GIN 9262 X benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung SpĆ¼lmaschine Blomberg

Bedienungsanleitung SpĆ¼lmaschine

Neueste Bedienungsanleitung fĆ¼r -Kategorien-