Blaupunkt MPA 11500 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Blaupunkt MPA 11500 (12 Seiten) in der Kategorie Hi-Fi-Anlage. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
VELOCITY POWER
MPA 480
MPA 680
MPA 11500
Operating and Installation Instruction
Enjoy it.
Voltage Supply
•
•
•
•
Integrated Fuse
The integrated fuse in the device protects the output
voltage and the entire electrical system in case of
malfunction. Do not replace damaged fuse with higher
current.
Switching On/O
This device will automatically turn on if a music signal is
detected. The device will also automatically turn o if no
music signal is received.
Remote Control
Recycling and Disposal
Please dispose responsibly.
Subject to change.
Disconnect the negative terminal of the battery.
Refer to the safety notes of vehicle manufacturer.
Ensure positions of the holes are nowhere near the
vehicle component to avoid any damage during
drilling.
Ensure cross section of the cable is no less than
2.5mm2 if the positive and negative cables are too
long.
Incorrect installation may result in malfunction of
the device or the car sound system.
The amplier is designed to use 4-8 AWG power and
ground cable.
Select a dry and well-ventilated location
to install the device.
The device must not be installed in overly
exposed location such on the rear shelf,
rear seat etc.
The installation location must be suitable for
screw holes and have stable ground support.
Ensure to connect the ground wire of the unit
properly the vehicle chassis.
Ensure to use leads that is larger than 10-gauge
(AWG 10) when connecting to +12V and GND
terminals.
Connect the +12V power input lead only when the
rest of the connections has been properly set.
In no event shall Blaupunkt be liable for any direct,
indirect, punitive, incidental, special consequential
damages, to property or life, improper storage,
whatsoever arising out of or connected with the use
or misuse of our products.
USA & CANADA : Product not intended for sale in
the United States and Canada. If purchased in the
U.S. or Canada, this product is purchased as-is. No
warranty, express or implied is provided in the U.S.
and Canada.
CAUTIONS
Proper system planning is vital in order to maximize the
device’s performance and road safety. Plan your
installation carefully to avoid compromising
performance reliability of the system. Consult an
authorized Blaupunkt dealer for installation or
reparation. Read the manual carefully before operating
the device for the rst time.
Safety Notes
Ensure to follow below safety notes during
installation and wiring connection : -
•
•
•
•
Installation and Connection Instructions
•
•
•
•
•
•
•
Disclaimer
•
•
Use the supplied power extension cable to connect
to the positive battery terminal.
Firmly and carefully connect the ground lead to a
bare metal point on the vehicle chassis.
The control of the device should be a two-channel
control, either via the preamplier outputs or the
loudspeaker, output of the car sound system.
A control solely via the right or left channel is also
possible since the low-frequency portion of the
music is generally identical on both channels.
1
FUSE
GROUND +12VREM CH 1 CH 2 CH 3 CH 4
MPA 480 FUNCTION CONTROLLING DIAGRAM
SPECIFICATION
2
POWER
PROTECT
GAINHIGH PASSLOW PASS
5V 0.2V
10Hz 4KHz0dB 12dB 150Hz30Hz
BASS EQ
X-OVER
HIGH FULLLOW/BP
GAIN
5V 0.2V
10Hz 4KHz0dB 30Hz 12dB 150Hz
BASS EQ
CH 3/CH 4
CH 1/CH 2
HIGH PASSLOW PASS
X-OVER
FULLLOW/BP
CH 1
LINE INPUT
CH 2
CH 3
CH 4
4CH2CH
CH MODE
Power
•
•
•
•
Amplier
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Voltage Supply 14.4V
Idling Current 1.1A
Fuse 30A x 2
Consumption @ 2Ω, 14.4 VDC 40A
(Max Musical Power)
Amplier Class CLASS D
Channel 4
PCB Layer Double
Max Output Power @ 4 ohms 120W x 4
RMS Power 4 ohms 90W x 4
RMS Power 2 ohms 150W x 4
RMS Power 4 ohms Bridge 300 x 2
Signal-To-Noise Ratio 95dB
Frequency Range 5-35kHz
Gain Adjust 0.5-5V
Bass Boost Frequency 45Hz
Bass Boost Level 12dB
Total Harmonic Distortion 0.06%
Crossover Frequency 30-150Hz (L), 10Hz - 4kHz (H)
Dimension (W x H x D) 242 x 192 x 52mm
Net Weight 2.2kg


Produktspezifikationen

Marke: Blaupunkt
Kategorie: Hi-Fi-Anlage
Modell: MPA 11500

Brauchst du Hilfe?

Wenn Sie Hilfe mit Blaupunkt MPA 11500 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Hi-Fi-Anlage Blaupunkt

Bedienungsanleitung Hi-Fi-Anlage

Neueste Bedienungsanleitung für -Kategorien-