Blackburn Piston 1 Bedienungsanleitung
Blackburn
Fahrradpumpen
Piston 1
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Blackburn Piston 1 (1 Seiten) in der Kategorie Fahrradpumpen. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/1
PISTON 1â„¢
Floor pump
Part# 7074791 (Dark Olive/Yellow)
7074792 (Red/White/Blue)
7074793 (Black/White)
WARNING: NEVER OVERINFLATE YOUR TIRE. SEE TIRE SIDEWALL FOR MANUFACTURER RECOMMENDED TIRE INFLATION PSI. NEVER OVERINFLATE YOUR BALL OR TOY.
SEE MANUFACTURER FOR RECOMMENDED PRESSURE.
Visit us at blackburndesign.com for product updates.
INSTRUCTIONS FOR TIRE INFLATION
1. Remove the dust cap from your tire valve. If you have Presta
valves,unscrew the metal locking barrel at the tip of the valve.
2. Push in the tip of either valve type to ensure that the valve isn’t
stuck and to blow out any dirt.
3. Choose the correct pump head insert for your valve type (FIGURE 1).
If necessary, unscrew cap and reverse rubber insert.
4. Press pump head onto valve and lift the lever to lock.
5. Inflate to desired air pressure. DO NOT OVERINFLATE TIRE.
6. If necessary release air to adjust tire pressure. Use a tire gauge for accurate
tire pressure pressure. (#7085517 Blackburn HONEST Digital Pressure Gauge)
7. Press pump head lever down and remove.
8. If using Presta valves, screw the locking barrel until tight.
9. Replace the tire valve dust cap.
INSTRUCTIONS FOR BALL OR TOY INFLATION
1. Select the correct attachment (included) for your toy or ball and insert
it into the long Presta side of the Anyvalve pump head. Lift the pump head
lever to lock.
2. Insert the tip of the attachment into your ball or toy.
3. Inflate the ball or toy to the manufacturer required pressure.
4. Unlock the pump head lever, remove attachement and replace it into the included
attachment holder.
>20mm LONG
PRESTA
<20mm SHORT
PRESTA
ANYVALVE
TM
PUMP HEAD
FIGURE 1
SHORT PRESTA/
DUNLOP
LONG PRESTA/
SCHRADER
Large 2" gauge
Wide 10.5" handle
Anyvalveâ„¢ pump head
Produktspezifikationen
| Marke: | Blackburn |
| Kategorie: | Fahrradpumpen |
| Modell: | Piston 1 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Blackburn Piston 1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Fahrradpumpen Blackburn
12 Oktober 2024
Bedienungsanleitung Fahrradpumpen
Neueste Bedienungsanleitung für -Kategorien-
14 Oktober 2024
14 Juli 2024
10 Juli 2024
10 Juli 2024
6 Juli 2024