Black Decker BCG720 N Bedienungsanleitung
Black Decker
Winkelschleifer
BCG720 N
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Black Decker BCG720 N (79 Seiten) in der Kategorie Winkelschleifer. Dieser Bedienungsanleitung war für 26 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/79
www.blackanddecker.eu
14
6
5 3
2 7
BCG720 M1
BCG720 N
23
11
12
18 19
14
8a
16
6
8
9a
9
87
A
E
B
CD
5
5a
10
F
11
6
12
14
14
6
12
11
GH
I J
KL
4
ENGLISH (Original instructions)
5
ENGLISH
(Original instructions)
Intended use
Your BLACK+DECKER BCG720 M1, BCG720 N angle grinder
has been designed for grinding and cutting metal and masonry
using the appropriate type of cutting or grinding disc when
tted with the appropriate guard. This tool is intended for
consumer use only.
Safety instructions
General power tool safety warnings
@ Warning! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions listed below may result in electric shock,
re and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in all of the warnings listed below refers
to your mains operated (corded) power tool or battery
operated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b. Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
c. Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodied plugs
and matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
f. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the inuence
of drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal
injury.
b. Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
c. Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your nger on the switch or
energising power tools that have the switch on invites
accidents.
d. Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
e. Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
f. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
g. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
reduce dust-related hazards.
h. Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool
safety principles. A careless action can cause severe
injury within a fraction of a second.
4. Power tool use and care
a. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was
designed.
b. Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
M
N
O
d. Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tools
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
h. Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and grasing
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
5. Battery tool use and care
a. Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of re when used with
another battery pack.
b. Use power tools only with specically designated
battery packs. Use of any other battery packs may create
a risk of injury and re.
c. When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws, or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a re.
d. Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, ush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
e. Do not use a battery pack or tool that is damaged or
modied. Damaged or modied batteries may exhibit
unpredictable behaviour resulting in re, explosion or
risk of injury.
f. Do not expose a battery pack or tool to re or
excessive temperature. Exposure to re or
temperature above 130 ºC may cause explosion.
g. Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specied in the instructions. Charging improperly or
Produktspezifikationen
| Marke: | Black Decker |
| Kategorie: | Winkelschleifer |
| Modell: | BCG720 N |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Black Decker BCG720 N benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Winkelschleifer Black Decker
23 August 2024
19 August 2024
17 August 2024
14 August 2024
5 August 2024
5 August 2024
4 August 2024
31 Juli 2024
Bedienungsanleitung Winkelschleifer
- Winkelschleifer Makita
- Winkelschleifer Bosch
- Winkelschleifer Flex
- Winkelschleifer Parkside
- Winkelschleifer AEG
- Winkelschleifer Black And Decker
- Winkelschleifer FERM
- Winkelschleifer Skil
- Winkelschleifer Topcraft
- Winkelschleifer Trotec
- Winkelschleifer Sparky
- Winkelschleifer Bort
- Winkelschleifer DeWalt
- Winkelschleifer Einhell
- Winkelschleifer Maktec
- Winkelschleifer Stayer
- Winkelschleifer Worx
- Winkelschleifer Tacklife
- Winkelschleifer Hikoki
- Winkelschleifer Hitachi
- Winkelschleifer Max
- Winkelschleifer Metabo
- Winkelschleifer Stanley
- Winkelschleifer Power Craft
- Winkelschleifer Scheppach
- Winkelschleifer Meec Tools
- Winkelschleifer Batavia
- Winkelschleifer Brüder Mannesmann
- Winkelschleifer Milwaukee
- Winkelschleifer Toledo
- Winkelschleifer Ozito
- Winkelschleifer Gamma
- Winkelschleifer Lux Tools
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
15 Oktober 2024
14 Oktober 2024
13 Oktober 2024
11 Oktober 2024
27 August 2024
27 August 2024
24 August 2024
24 August 2024
24 August 2024