Black And Decker KR805 Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Black And Decker KR805 (78 Seiten) in der Kategorie Schlagbohrmaschinen. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/78
KR705
KR805
KR806
KR1001
2
A
B C
D
3
ENGLISH
(Original instructions)
Intended use
Your Black & Decker impact drill has been designed for
drilling in wood, metal, plastics, and masonry as well as for
screwdriving purposes. This tool is intended for consumer
use only.
Safety instructions
General power tool safety warnings
@ Warning! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions listed below may result in electric shock,
re and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains
operated (corded) power tool or battery operated (cordless)
power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b. Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
c. Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodied plugs
and matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
f. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the inuence
of drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal
injury.
b. Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
c. Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your nger on the switch or
energising power tools that have the switch on invites
accidents.
d. Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
e. Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
f. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
g. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
reduce dust-related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was
designed.
b. Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Produktspezifikationen
| Marke: | Black And Decker |
| Kategorie: | Schlagbohrmaschinen |
| Modell: | KR805 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Black And Decker KR805 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schlagbohrmaschinen Black And Decker
14 Juli 2024
13 Juli 2024
12 Juli 2024
12 Juli 2024
12 Juli 2024
10 Juli 2024
10 Juli 2024
6 Juli 2024
6 Juli 2024
6 Juli 2024
Bedienungsanleitung Schlagbohrmaschinen
- Schlagbohrmaschinen Makita
- Schlagbohrmaschinen Bosch
- Schlagbohrmaschinen Parkside
- Schlagbohrmaschinen AEG
- Schlagbohrmaschinen FERM
- Schlagbohrmaschinen Ryobi
- Schlagbohrmaschinen Skil
- Schlagbohrmaschinen Bort
- Schlagbohrmaschinen Luxor
- Schlagbohrmaschinen Hikoki
- Schlagbohrmaschinen Hitachi
- Schlagbohrmaschinen Milwaukee
- Schlagbohrmaschinen Ronix
Neueste Bedienungsanleitung für -Kategorien-
13 Oktober 2024
14 Juli 2024
13 Juli 2024
13 Juli 2024
13 Juli 2024
13 Juli 2024
12 Juli 2024
12 Juli 2024
11 Juli 2024
10 Juli 2024