Black And Decker BDEQS15C Bedienungsanleitung

Black And Decker Schleifmaschine BDEQS15C

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Black And Decker BDEQS15C (28 Seiten) in der Kategorie Schleifmaschine. Dieser Bedienungsanleitung war für 35 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/28
To register your new product, visit
www.BlackandDecker.com/NewOwner
INSTRUCTION MANUAL
1/4 SHEET SANDER
Thank you for choosing BLACK+ ! DECKER
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR
ANY REASON.
If you have a question or experience a problem with your BLACK+ DECKER
purchase, go to http://www.blackanddecker.com/instantanswers
If you can’t find the answer or do not have access to the Internet, call
1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri. to speak with an agent.
Please have the catalog number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPA OL EN LA CONTRAPORTADA.N
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
CATALOG NUMBER
BDEQS15C
2
GENERAL POWER TOOL SAFETY WARNINGS
WARNING: Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
1) WORK AREA SAFETY
a) . Keep work area clean and well lit Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks which may
ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric shock if
your body is earthed or grounded.
c) . Do not expose power tools to rain or wet conditions Water entering a power
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a ground
fault circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of
electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use common sense when operating
a power tool. Do not use a power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inattention while operating power tools
may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, nonskid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off position before
connecting to power source and/ or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energizing power tools that have
the switch on invites accidents.
d) . Remove any adjusting key or wrench before turning the power tool on A wrench
or a key left attached to a rotating part of the power tool may result in personal injury.
SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual. The information it contains relates to
protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help
you recognize this information.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION: Indicates a potentially haz ard ous situation which, if not avoided, may
result in minor or mod er ate injury.
NOTICE: Used without the safety alert symbol indicates potentially hazardous
situation which, if not avoided, may result in property damage.
e) Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewelry or long hair can be
caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust collection
can reduce dust-related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct power tool for your application. The
correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the power
tool before making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits, etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the power
tool for operations different from those intended could result in a hazardous situation.
5) SERVICE
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
SPECIFIC SAFETY RULES
WARNING: ALWAYS use safety glasses. Everyday eye glasses are NOT
safety glasses. Also use face or dust mask if operation is dusty. ALWAYS
WEAR CERTIFIED SAFETY EQUIPMENT:
  •ANSI Z87.1 eye protection (CAN/CSA Z94.3)
  •ANSI S12.6 (S3.19) hearing protection
  •NIOSH/OSHA/MSHA respiratory protection
•Sanding of lead-based paint is not recommended. Sanding Lead Based Paint See
for additional information before sanding paint.
•Cleanyourtooloutperiodically.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities contains chemicals known to the State of California to
cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
  •leadfromlead-basedpaints,
  •crystallinesilicafrombricksandcementandothermasonryproducts,and
•arsenicandchromiumfromchemically-treatedlumber.
Yourriskfromtheseexposuresvaries,dependingonhowoftenyoudothistypeofwork.
Toreduceyourexposuretothesechemicals:workinawellventilatedarea,andwork
withapprovedsafetyequipment,suchasthosedustmasksthatarespeciallydesignedto
filter out microscopic particles.
• Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling,
and other construction activities. Wear protective clothing and wash exposed
areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the
skinmaypromoteabsorptionofharmfulchemicals.
3

Produktspezifikationen

Marke: Black And Decker
Kategorie: Schleifmaschine
Modell: BDEQS15C

Brauchst du Hilfe?

Wenn Sie Hilfe mit Black And Decker BDEQS15C benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Schleifmaschine Black And Decker

Black And Decker

Black And Decker KG2300 Bedienungsanleitung

29 September 2024
Black And Decker

Black And Decker KG65 Bedienungsanleitung

23 September 2024
Black And Decker

Black And Decker REVCMS12C Bedienungsanleitung

6 September 2024
Black And Decker

Black And Decker CMEBL700 Bedienungsanleitung

4 September 2024
Black And Decker

Black And Decker 2750-220 Bedienungsanleitung

1 September 2024
Black And Decker

Black And Decker CD455 Bedienungsanleitung

31 August 2024
Black And Decker

Black And Decker 24543 Bedienungsanleitung

9 August 2024
Black And Decker

Black And Decker TV810 Bedienungsanleitung

6 August 2024
Black And Decker

Black And Decker KG2023 Bedienungsanleitung

6 August 2024
Black And Decker

Black And Decker BEG110 Bedienungsanleitung

30 Juli 2024

Bedienungsanleitung Schleifmaschine

Neueste Bedienungsanleitung für -Kategorien-

Makita

Makita GA9060R Bedienungsanleitung

15 Oktober 2024
Hitachi

Hitachi G 13SR Bedienungsanleitung

14 Oktober 2024
Makita

Makita DGA700Z Bedienungsanleitung

13 Oktober 2024
Metabo

Metabo WP820-115 Bedienungsanleitung

8 Oktober 2024
DeWalt

DeWalt DW887N Bedienungsanleitung

7 Oktober 2024
Milwaukee

Milwaukee 0725-21 Bedienungsanleitung

5 Oktober 2024
Makita

Makita GA013GD101 Bedienungsanleitung

3 Oktober 2024
Milwaukee

Milwaukee 2784-20 Bedienungsanleitung

3 Oktober 2024
Ryobi

Ryobi RAG800-115 Bedienungsanleitung

2 Oktober 2024
Makita

Makita GA022GD202 Bedienungsanleitung

2 Oktober 2024